MOES ZT-SY-EU4S-BK-MS-C

Download PDF
Contents

MOES ZigBee Wireless 12-Scene Switch User Manual

Model: ZT-SY-EU4S-BK-MS-C

1. Product Overview

The MOES ZigBee Wireless 12-Scene Switch is a versatile smart home device designed to simplify control of your smart appliances and scenes. It features a compact, magnetic design, allowing it to function as both a wall-mounted switch and a portable remote control. With four buttons, each supporting single click, double click, and long press actions, it enables up to 12 different scene automations within the Tuya Smart Life application.

MOES ZigBee Wireless 12-Scene Switch and its packaging

Image: The MOES ZigBee Wireless 12-Scene Switch, shown alongside its retail packaging, highlighting its sleek black design.

2. Product Features

  • Wireless Scene Automation: Automate scene changes for all Tuya smart devices via the Tuya Smart Life app.
  • Multiple Scene Control: Each button supports three pairing modes (single click, double click, long press) to achieve 3 scenes per button, totaling 12 scenes for the 4-button switch.
  • Compact & Magnetic Design: Functions as a wireless wall switch when mounted and a portable remote when detached. Its slim 1.3 cm thickness makes it easy to carry.
  • Enhanced Responsiveness: Accelerates smart device response times and provides smoother control, reducing reliance on a WiFi-only network.
  • Easy Installation: Can be affixed anywhere using the included double-sided adhesive tape.
  • Low Power Consumption: Battery-powered (CR2430 included) for long-lasting operation without wiring.
Diagram illustrating key features of the MOES ZigBee Wireless Scene Switch

Image: A visual representation of the switch's key features, including its 1.3cm thickness, CR2430 3V input power, 730-day battery life, scene setting capability, remote control function, battery power, and mechanical push on/off button.

3. Package Contents

Please check the package contents upon unboxing:

  • 1 x MOES ZigBee Wireless 12-Scene Switch
  • 1 x CR2430 Battery (pre-installed or separate)
  • 1 x Double-sided Adhesive Tape
  • 1 x User Manual (this document)

4. Setup

4.1 Battery Installation

The device typically comes with a CR2430 battery pre-installed. If not, or if you need to replace it:

  1. Gently open the back cover of the switch.
  2. Insert the CR2430 battery with the positive (+) side facing up.
  3. Close the back cover securely.

4.2 Pairing with Tuya ZigBee Hub

Important: This switch requires a Tuya ZigBee Hub (e.g., ASIN: B08KFBPJ3N) to function. Ensure your hub is set up and connected to the Tuya Smart Life app.

  1. Open the Tuya Smart Life app on your smartphone.
  2. Ensure your ZigBee hub is online and in pairing mode (refer to your hub's manual for specific instructions).
  3. On the MOES ZigBee Wireless 12-Scene Switch, press and hold any button for 5-8 seconds until the indicator light flashes, indicating it's in pairing mode.
  4. In the Tuya Smart Life app, follow the prompts to add a new device. The app should discover the switch automatically.
  5. Once discovered, confirm the device and assign it to a room if desired.

4.3 App Configuration and Scene Creation

After successful pairing, you can configure the switch's actions in the Tuya Smart Life app:

  1. In the app, navigate to the newly added scene switch.
  2. Each of the four buttons will be listed. Tap on a button to configure its actions.
  3. You can set up three different actions for each button: Single Click, Double Click, and Long Press.
  4. For each action, select 'Tap-to-Run' or 'Automation' to link it to specific smart devices or pre-defined scenes in your Tuya ecosystem. For example, a single click could turn on a light, a double click could activate a 'movie night' scene, and a long press could turn off all devices.
Screenshot of Tuya Smart APP showing scene creation for the ZigBee switch

Image: A smartphone screen displaying the Tuya Smart Life app interface, demonstrating how to add intelligence and create smart scenes for the ZigBee switch.

5. Operating Instructions

5.1 Button Functions

Each of the four buttons on your MOES ZigBee Wireless 12-Scene Switch can perform three distinct actions, allowing for versatile control:

  • Single Click: A quick, momentary press and release.
  • Double Click: Two quick presses in succession.
  • Long Press: Press and hold the button for approximately 2-3 seconds.
Diagram showing single click, double click, and long press conditions for a button

Image: A visual guide illustrating the three selectable conditions for each button: single click, double click, and long press, enabling various scene activations from a single button.

5.2 Scene Control

Once configured in the Tuya Smart Life app, simply press the desired button with the corresponding action (single, double, or long press) to trigger your pre-set scenes or control individual smart devices. For example, a single tap on a button could activate your 'Home Mode' scene, turning on lights, air conditioners, and other electronic devices as you arrive home.

Example of one-tap home mode activation with the scene switch

Image: An illustration showing how a single press of the scene switch can activate a 'home mode', turning on various smart devices like lights and air conditioners upon arrival.

6. Maintenance

6.1 Battery Replacement

The switch is powered by a CR2430 Lithium metal battery. When the battery level is low, the switch's performance may degrade, or it may stop responding. Replace the battery by following the steps in section 4.1.

6.2 Cleaning

To clean the switch, gently wipe its surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.

7. Troubleshooting

  • Switch not responding:
    • Check if the battery needs replacement.
    • Ensure the Tuya ZigBee Hub is powered on and connected to the internet.
    • Verify that the switch is within range of the ZigBee hub.
    • Try re-pairing the switch with the ZigBee hub (refer to section 4.2).
  • Scenes not triggering correctly:
    • Review the scene configurations in the Tuya Smart Life app to ensure they are set up correctly for each button action.
    • Check the status of the smart devices involved in the scene.
  • Indicator light not flashing during pairing:
    • Ensure the battery is correctly installed and has sufficient charge.
    • Press and hold the button for the specified duration (5-8 seconds).

8. Specifications

ParameterValue
Product NameScene Switch
Model NumberZT-SY-EU4S-BK-MS-C
Input PowerCR2430 3V
Battery LifeApprox. 730 Days
Communication ProtocolZigBee
Working Temperature-10~50℃ (14~122℉)
Working Humidity0~90%RH (non-condensing)
Standby Power< 1.5W
Switch Lifecycle> 500,000 clicks
Dimensions (L x W x H)8.6 x 8.6 x 1.3 cm (3.38 x 3.38 x 0.51 inches)
Weight90 grams
MaterialMagnet
Operating ModeON-OFF
Current Rating3 mA
Operating Voltage3 Volts (DC)
Contact TypeNormally closed
Connector TypeWireless
Switch TypeButton
Diagram showing dimensions and technical specifications of the MOES Scene Switch

Image: A detailed diagram outlining the physical dimensions (86mm) and key technical specifications of the MOES Scene Switch, including input power, battery life, communication protocol, working temperature, and humidity.

9. Warranty and Support

Warranty information for this product was not available in the provided data. For warranty claims, technical support, or further inquiries, please contact MOES customer service directly through their official website or the retailer from whom you purchased the product.

© 2023 MOES. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.