MEUBLE COSY Rocking Chair Instruction Manual

Introduction

Thank you for choosing the MEUBLE COSY Rocking Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new rocking chair. Please read these instructions carefully before assembly and retain them for future reference.

Image: The MEUBLE COSY Rocking Chair, fully assembled, featuring a beige fabric upholstery and wooden rocker base, placed in a modern living room.

Safety Information

• Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Assemble the chair on a soft, clean surface to prevent scratches.
• Tighten all screws firmly, but do not overtighten. Periodically check and retighten fasteners.
• Keep children and pets away from the assembly area.
• Do not stand on the chair.
• Maximum weight capacity: 110 kg (242 lbs). Do not exceed this limit.

Package Contents

Before beginning assembly, verify that all components are included in your package:

• Rocking Chair Frame (metal and wood components)
• Upholstered Seat and Backrest
• Hardware Pack (screws, washers, Allen key)
• Assembly Instructions

Setup and Assembly

Assembly is required for this rocking chair. Follow these steps carefully:

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, flat surface to prevent damage.
2. Identify Parts: Refer to the included diagram (if available) to identify each component. Pay close attention to labels on parts, especially for the rocker bases, to ensure correct orientation.
3. Attach Rocker Bases: Secure the wooden rocker bases to the metal frame using the provided screws and Allen key. Ensure the curved parts of the rockers are facing the correct direction for rocking motion.
4. Assemble Seat and Backrest: Connect the upholstered seat and backrest sections to the main frame. Align the pre-drilled holes and insert the screws, tightening them securely.
5. Attach Armrests: Secure the armrests to the seat and backrest frame.
6. Final Tightening: Once all components are loosely assembled, go back and tighten all screws firmly. Do not overtighten to avoid stripping the threads.
7. Check Stability: Gently rock the chair to ensure it is stable and all connections are secure.

Image: Close-up details of the rocking chair, showing the tufted backrest, padded armrest, comfortable seat, and the sturdy wooden rocker base.

Operating Instructions

The MEUBLE COSY Rocking Chair is designed for comfortable relaxation. To use your chair:

• Sit centrally on the seat, ensuring your weight is evenly distributed.
• Gently push off with your feet to initiate a rocking motion. Control the speed and range of motion with your feet.
• Avoid excessive or aggressive rocking, which could lead to instability or damage.
• Ensure there is sufficient clear space around the chair to prevent collisions with walls or other furniture during rocking.

Maintenance

Proper care will extend the life and appearance of your rocking chair:

• Cleaning: Wipe the fabric upholstery with a clean, damp cloth. For spills, blot immediately with a clean, dry cloth. Avoid harsh chemicals or abrasive cleaners.
• Frame Care: Wipe the wooden and metal components with a soft, dry cloth.
• Fasteners: Periodically check all screws and bolts to ensure they remain tight. Retighten as necessary to maintain stability.
• Placement: Avoid placing the chair in direct sunlight or near heat sources, as this can cause fading or damage to the materials.

Troubleshooting

Specifications

Image: A technical diagram illustrating the key dimensions of the rocking chair, including height, width, depth, seat height, and backrest height.

Warranty and Support

For warranty information or customer support, please refer to the documentation provided with your purchase or contact MEUBLE COSY directly through their official website or customer service channels. Please have your model number (FUNKEL FABRIC BEIGE ROCK) and purchase details ready when contacting support.