HANDA DIY Fluid Bear Painting Kit - 9.05 Inch Bear Mold Instruction Manual

1. Product Overview

The HANDA DIY Fluid Bear Painting Kit provides a creative outlet for individuals to design their own unique bear figurine. This kit includes a high-quality vinyl bear mold and, depending on the package, a selection of acrylic paints and tools to create a fluid art masterpiece.

Image: A blank 9.05 inch white bear mold, ready for painting.

1.1 Package Contents (Full Kit)

• Bear Mold (9.05 inch, PVC)
• Brushes
• Paints (Assorted colors: Green, Pink, White, Black, Blue, Red, Purple, etc.)
• Drawing Plates
• Protective Pads
• Disposable Apron

Note: If you purchased the "bear mold only" variant, paints and accessories are not included.

1.2 Product Features

• Material: High-quality eco-friendly vinyl for durability and optimal paint adhesion.
• Articulation: Head can be rotated 360°, hands and legs can swing back and forth, and legs can swing around 360° for dynamic posing.
• Creative Expression: Designed for fluid art, allowing for unique and personalized designs.

Image: A diagram illustrating the rotatable head, and movable hands and legs of the bear mold.

2. Safety Information

• Recommended for ages 3 and up.
• Children should be accompanied by adults during the painting process.
• Wear the provided disposable apron and gloves to protect clothing and skin from paint stains.
• Work in a well-ventilated area.
• Avoid contact with eyes. In case of contact, rinse immediately with plenty of water.

3. Setup

1. Choose a flat, stable surface for your workspace.
2. Lay down the protective pads or a disposable tablecloth to cover your work area.
3. Put on the disposable apron and gloves.
4. Arrange your bear mold, paints, brushes, and drawing plates within easy reach.

4. Operating Instructions (DIY Painting Steps)

Follow these steps to create your unique fluid bear:

Image: A visual guide demonstrating the four main steps for creating a fluid bear: choosing colors, pouring paint into a cup, pouring the mixed paint over the bear, and setting it aside to dry.

1. Choose Your Favorite Colors: Select the acrylic paint colors you wish to use for your fluid bear.
2. Pour Paint into a Cup: Pour your chosen paints into a single cup. You can layer them or pour them in a marbled fashion. Do not stir the paints if you desire a fluid, marbled effect.
3. Pour Down the Adjusted Color: Slowly and evenly pour the mixed paint from the cup over the bear mold. Ensure all desired areas are covered.
4. Set Aside to Dry: Place the painted bear on a drawing plate or protective pad and allow it to dry completely. Acrylic paints typically air-dry naturally within 48 hours. Drying can be accelerated with gentle heat if desired.

5. Maintenance

• Cleaning Tools: Clean brushes and drawing plates immediately after use with water to prevent paint from drying and hardening.
• Finished Bear Care: Once completely dry, your fluid bear can be displayed as a decorative item. Avoid exposing it to direct sunlight for prolonged periods to prevent color fading.
• Storage: Store the finished bear in a dry, dust-free environment.

6. Troubleshooting

• Paint not flowing smoothly: Ensure paints are at room temperature. If paints are too thick, a small amount of pouring medium (not included) can be added to achieve desired consistency.
• Uneven paint coverage: Ensure the bear mold is clean and free of dust or oils before painting. Pour paint slowly and evenly, rotating the bear as needed.
• Paint drying too quickly: Work in a cooler environment or a shaded area. For slower drying, a few drops of flow improver (not included) can be added to the paint.
• Paint stains: Clean any spills immediately with water and soap. For dried acrylic paint, rubbing alcohol or specialized acrylic paint remover may be used with caution on non-painted surfaces.

7. Specifications

8. Warranty Information

This HANDA DIY Fluid Bear Painting Kit comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects. Please retain your proof of purchase for any warranty claims. For support, please contact HANDA customer service.