YING RAY A2-2022092301A02
Contents
YING RAY Replacement Remote Control User Manual
For Blueridge Ductless Wall Mounted Heat Pump Air Handler Air Conditioners
Model: A2-2022092301A02
1. Introduction
This manual provides instructions for the proper setup, operation, and maintenance of your YING RAY replacement remote control. This remote is designed to operate specific Blueridge ductless wall-mounted heat pump air handler air conditioner models. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.
2. Package Contents
Verify that all items listed below are included in your package:
- 1 x YING RAY Replacement Remote Control
- 1 x Wall Mount Case

This image displays the YING RAY replacement remote control on the left, featuring a silver and black design with a digital display and various function buttons. To the right is a white plastic wall mount case designed to hold the remote control.
3. Compatibility
Important Note: This is not a universal remote control.
This replacement remote control is specifically designed for the following Blueridge Ductless Wall Mounted Heat Pump Air Handler Air Conditioner models:
- BMKH24MFCC
- BMKH24UH23
- BMKH30LM21
- BMKH30M-NDG3
- BMKH36LM23UH
- BMKH42G321
- BMKH42LM21
- BMKH42LM23UH
Please verify your air conditioner model or original remote control model before attempting to use this replacement unit.
4. Setup
4.1 Battery Installation
- Open the battery compartment cover on the back of the remote control.
- Insert two new AAA batteries (not included), ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Close the battery compartment cover securely.
The remote control is now ready for use. No pairing is required as it operates via infrared (IR) technology.
5. Operating Instructions
Point the remote control directly at the indoor unit of your air conditioner when operating. Ensure there are no obstructions between the remote and the unit.
5.1 Remote Control Buttons and Display
The remote control features a digital display and various buttons for controlling your air conditioner. The display shows current settings such as temperature, mode, fan speed, and time. Temperature can be displayed in both Celsius and Fahrenheit.
- Power Button (⏻): Turns the air conditioner ON or OFF.
- MODE Button: Cycles through operating modes (e.g., Auto, Cool, Dry, Heat, Fan).
- FAN Button: Adjusts the fan speed (e.g., Auto, Low, Medium, High).
- Temperature Up/Down Buttons (▲/▼): Adjusts the desired temperature setting.
- SWING Button: Activates or deactivates the automatic louver swing function.
- TURBO Button: Activates rapid cooling or heating for a short period.
- SLEEP Button: Activates sleep mode, which adjusts temperature and fan speed for comfortable sleep.
- TEMP Button: May cycle through display options or adjust temperature units (refer to your AC unit's manual for specific functionality).
- IFEEL Button: Activates the 'I Feel' function, which senses the temperature at the remote's location for more precise control.
- CLOCK Button: Used to set the current time on the remote's display.
- LIGHT Button: Controls the display light on the indoor unit.
- TIMER ON/OFF Button: Sets or cancels the automatic ON/OFF timer for the air conditioner.
5.2 Setting the Clock
- Press the CLOCK button. The time display will flash.
- Use the Temperature Up/Down (▲/▼) buttons to adjust the hour and minute.
- Press the CLOCK button again to confirm the setting.
5.3 Using the Timer Function
The timer function allows you to set the air conditioner to turn on or off automatically at a specified time.
- Press the TIMER ON/OFF button. The timer indicator will appear on the display.
- Use the Temperature Up/Down (▲/▼) buttons to set the desired ON or OFF time.
- Press the TIMER ON/OFF button again to confirm.
- To cancel the timer, press the TIMER ON/OFF button until the timer indicator disappears.
6. Maintenance
6.1 Cleaning the Remote Control
To clean the remote control, wipe it gently with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or chemical solvents, as these may damage the remote's surface or internal components.
6.2 Battery Replacement
Replace batteries when the remote control's display becomes dim or if the remote becomes unresponsive. Always replace both batteries at the same time with new AAA batteries. Remove batteries if the remote will not be used for an extended period to prevent leakage.
7. Troubleshooting
- Remote not responding:
- Check if the batteries are correctly installed and not depleted. Replace if necessary.
- Ensure there are no obstructions between the remote control and the air conditioner's indoor unit.
- Confirm that the remote control is compatible with your specific Blueridge AC model.
- Display is dim or blank:
- Replace the batteries with new ones.
If issues persist after following these steps, consult the user manual for your Blueridge air conditioner unit or contact a qualified service technician.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | A2-2022092301A02 |
| Brand | YING RAY |
| Compatible Devices | Blueridge Air Conditioners (specific models listed in Section 3) |
| Connectivity Technology | Infrared (IR) |
| Controller Type | Button Control |
| Power Source | 2 x AAA Batteries (not included) |
| Item Weight | 1.06 ounces |
| Package Dimensions | 0.39 x 0.2 x 0.08 inches |
9. Warranty and Support
9.1 Warranty Information
This YING RAY replacement remote control comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or battery leakage.
9.2 Customer Support
For technical assistance, warranty claims, or further inquiries, please contact your retailer or the manufacturer directly. Please have your product model number (A2-2022092301A02) and proof of purchase available when contacting support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.