KFI UTV Plow Mount for Polaris RZR XP PRO - Instruction Manual

1. Product Overview

The KFI UTV Plow Mount is a robust, 100% USA-made front-mount system designed for Polaris RZR XP PRO/4 2020-2022 (Base/LE/Premium/Ultimate/Sport) models. It is engineered for supreme durability and ease of use, ensuring efficient snow plowing operations.

Key Features:

• 100% MADE IN USA, Front-Mount System
• Plate constructed from Grade 50 Steel
• Powder Coated Black for supreme durability
• All Pin Tabs are constructed from 1/4" Thick Grade 50 Steel
• All Plow tabs are tapered to help reduce hang-ups while trail riding
• Complete installation instructions included
• All mounting hardware included

Figure 1: Exploded view of the KFI UTV Plow Mount components, showing the black powder-coated steel plates and mounting brackets.

2. Setup and Installation

This section provides general guidance for installing your KFI UTV Plow Mount. Refer to the detailed installation instructions included with your product for specific steps and diagrams.

2.1 Unpacking and Component Identification

1. Carefully unpack all components from the packaging.
2. Verify that all parts listed in the included parts list are present.
3. Familiarize yourself with the main mount plates, brackets, and hardware.

2.2 Mount Assembly and Vehicle Attachment

The KFI UTV Plow Mount is designed for a front-mount system and utilizes either the new style UTV Tube System #106300 or the old style UTV Tube System #105635 (sold separately).

1. Assemble the plow mount components as per the detailed instructions, ensuring all hardware is used correctly.
2. Position the assembled mount onto the front frame of your Polaris RZR XP PRO vehicle.
3. Secure the mount to the vehicle frame using the provided mounting hardware. Ensure all bolts are tightened to the manufacturer's specified torque settings.
4. Attach your compatible UTV push tubes to the plow mount.

3. Operating Instructions

Once the plow mount and blade are securely attached to your UTV, you are ready to begin snow removal. Always operate your UTV and plow system safely and responsibly.

3.1 Attaching the Plow Blade

1. Align the plow blade with the push tubes on the plow mount.
2. Securely attach the plow blade using the appropriate pins and fasteners. Ensure the blade is stable and properly aligned.

3.2 Plowing Techniques

• Straight Passes: For light to moderate snow, make straight passes, overlapping each pass slightly to ensure complete coverage.
• Angling the Blade: Adjust the plow blade angle to push snow to the side, preventing buildup in front of the vehicle.
• Speed Control: Maintain a consistent, moderate speed. Excessive speed can damage the plow or vehicle, while too slow may be inefficient.
• Obstacle Awareness: Be aware of obstacles such as curbs, rocks, or uneven terrain that could damage the plow or vehicle.

4. Maintenance

Regular maintenance will extend the life of your KFI UTV Plow Mount and ensure optimal performance.

• Cleaning: After each use, especially in corrosive environments (e.g., salt), clean the plow mount thoroughly with water and mild soap.
• Inspection: Periodically inspect all components for signs of wear, damage, or loose fasteners. Pay close attention to the Grade 50 Steel plates and 1/4" thick pin tabs.
• Lubrication: Lubricate moving parts and pivot points as recommended in your detailed product manual.
• Storage: Store the plow mount in a dry, protected area when not in use to prevent rust and corrosion.

5. Troubleshooting

This section addresses common issues you might encounter with your plow mount.

5.1 Difficulty Attaching Plow Blade

• Ensure the plow mount is correctly installed and aligned on the UTV.
• Check for any obstructions or debris preventing proper alignment of the blade and push tubes.
• Verify that the correct push tube system is being used with the mount.

5.2 Poor Plowing Performance

• Inspect the plow blade for excessive wear or damage. A worn blade may need replacement.
• Ensure the plow blade is set at the appropriate angle for the snow conditions.
• Check that the UTV tires have adequate traction for plowing.

5.3 Unusual Noises During Operation

• Stop operation immediately and inspect all connections and hardware for looseness.
• Check for any foreign objects caught in the plow mechanism.
• If the noise persists, discontinue use and contact KFI Products support.

6. Specifications

7. Warranty and Support

For detailed warranty information, product registration, or technical support, please visit the official KFI Products website or contact their customer service department. Ensure you have your model number (106235) and proof of purchase available when seeking support.