INKBIRDPLUS 1500W Electric Heater User Manual

1. Introduction

Thank you for choosing the INKBIRDPLUS 1500W Electric Heater. This compact and powerful space heater is designed to provide efficient and comfortable heating for indoor spaces such as bedrooms, offices, and living rooms. Equipped with advanced safety features and multiple operating modes, it offers a versatile heating solution. Please read this manual thoroughly before use to ensure proper operation and safety.

Figure 1.1: INKBIRDPLUS 1500W Electric Heater with remote control, illustrating heat output.

2. Important Safety Instructions

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

• Read all instructions before using this heater.
• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater.
• Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
• Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
• Always unplug heater when not in use.
• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair.
• Do not use outdoors.
• This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
• To disconnect heater, turn controls to off, then remove plug from outlet.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
• A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable vapors or liquids are used or stored.
• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).

Figure 2.1: The heater features built-in tip-over protection, which automatically shuts off the unit if it is accidentally knocked over, and overheating protection, which activates if the internal temperature exceeds safe limits.

3. Package Contents

Please check the package contents upon opening. If any items are missing or damaged, please contact customer support.

• INKBIRDPLUS 1500W Electric Heater (Model: HT2004-15D)
• Remote Control
• User Manual

4. Product Overview

Familiarize yourself with the components and control panel of your INKBIRDPLUS Electric Heater.

Figure 4.1: Key features of the INKBIRDPLUS Electric Heater, including power output, quick heating capability, timer function, oscillation, fan mode, and various heat settings.

Figure 4.2: Detailed view of the control panel icons and their corresponding functions.

Control Panel & Remote Functions:

• Power Button (⬤): Turns the heater ON or OFF.
• Timer Button (⏱): Sets the auto-off timer from 1 to 24 hours.
• Fan Mode (❄): Activates natural wind (fan only) mode.
• Oscillation Button (↷): Toggles the 45° oscillation function.
• Low Heat Mode (☔): Sets heating to 1000W.
• High Heat Mode (☔☔): Sets heating to 1500W.
• ECO Mode (ⓔ): Activates energy-saving mode, adjusting heat output based on set temperature.
• Temperature Up/Down (+ / -): Adjusts the target temperature in ECO mode (41°F to 97°F).

Figure 4.3: The multi-functional infrared remote control allows convenient operation from up to 6 meters away.

5. Setup

Follow these steps to set up your heater for first use:

1. Unpack: Carefully remove the heater and all accessories from the packaging. Retain packaging for future storage or transport.
2. Placement: Place the heater on a firm, level surface. Ensure there is at least 3 feet (0.9 m) of clear space around the heater from any walls, furniture, or other objects to allow for proper airflow and prevent fire hazards.
3. Power Connection: Plug the power cord directly into a 120V AC wall outlet. Do not use extension cords, power strips, or surge protectors.
4. Initial Check: Before turning on, ensure the air intake and exhaust vents are clear of any obstructions.

6. Operating Instructions

The INKBIRDPLUS heater offers various modes for customized comfort.

6.1 Power ON/OFF

• Press the ⬤ Power button on the control panel or remote control to turn the heater ON. The display will show the current room temperature.
• Press the ⬤ Power button again to turn the heater OFF. The fan will continue to run for 15 seconds to cool down the heating element before completely shutting off.

6.2 Heating Modes

The heater features three main operating modes: Fan Only, Low Heat, and High Heat, plus an ECO mode.

Figure 6.1: Visual representation of the four available operating modes for the heater.

• Fan Only Mode (❄): Press the Fan button to activate the natural wind mode. This circulates air without heating.
• Low Heat Mode (☔): Press the Low Heat button to operate the heater at 1000W.
• High Heat Mode (☔☔): Press the High Heat button to operate the heater at 1500W for faster heating.
• ECO Mode (ⓔ): Press the ECO Mode button. In this mode, the heater will automatically adjust its power output (1000W or 1500W) to maintain the set temperature, optimizing energy consumption.

Figure 6.2: Illustration of the different heating and fan modes and their respective heat outputs.

6.3 Temperature Setting (ECO Mode)

• When in ECO Mode, use the + and - buttons to set your desired temperature.
• The temperature can be set from 41°F to 97°F (5°C to 36°C) in 1°F increments.
• The heater will automatically turn off once the set time has elapsed.

Figure 6.3: The adjustable thermostat allows precise temperature control within the specified range.

6.4 Oscillation Function

• Press the ↷ Oscillation button to activate the 45° oscillating function. This distributes heat more evenly across a wider area.
• Press the button again to stop oscillation.

Figure 6.4: The auto-oscillation feature ensures widespread heat distribution.

6.5 Timer Function

• Press the ⏱ Timer button to set the auto-off timer.
• Each press will increase the timer by 1 hour, up to a maximum of 24 hours.
• The heater will automatically turn off once the set time has elapsed.

Figure 6.5: The timer function allows scheduling the heater to turn off automatically.

7. Maintenance

Proper maintenance ensures the longevity and efficient operation of your heater.

7.1 Cleaning

• Always unplug the heater and allow it to cool completely before cleaning.
• Use a soft, damp cloth to wipe the exterior surfaces of the heater. Do not use abrasive cleaners or solvents.
• Use a vacuum cleaner with a brush attachment to gently remove dust and lint from the air intake and exhaust grilles.
• Do not immerse the heater in water or allow water to drip into the interior of the heater.

7.2 Storage

• If storing the heater for an extended period, clean it thoroughly as described above.
• Store the heater in its original packaging, in a cool, dry place.
• Do not place heavy objects on top of the heater during storage.

8. Troubleshooting

If you experience issues with your heater, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact customer support.

9. Specifications

• Model Number: HT2004-15D
• Power Supply: 120V AC, 60Hz
• Rated Power: 1500W (High Heat) / 1000W (Low Heat)
• Amperage: 12.5 Amps
• Heating Element: PTC Ceramic
• Heating Coverage: Up to 160 sq ft
• Temperature Range: 41°F - 97°F (5°C - 36°C)
• Oscillation Angle: 45°
• Timer: 1-24 Hours
• Noise Level: <40dB
• Product Dimensions (D x W x H): 6.2" x 6.2" x 11.8" (15.7cm x 15.7cm x 30cm)
• Item Weight: 3.22 lbs (1.46 kg)
• Safety Features: Tip-Over Protection, Overheating Protection (shuts off at 140°F)
• Certifications: ETL, FCC, CE

Figure 9.1: Dimensions of the INKBIRDPLUS Electric Heater.

10. Warranty and Support

INKBIRDPLUS products are designed and manufactured to the highest quality standards. For warranty information or technical support, please refer to the warranty card included with your product or visit the official INKBIRDPLUS website.

For further assistance, please contact our customer service team.