SVAKOM Pulse Pure Silicone Clitoral Stimulator User Manual

Introduction

Thank you for choosing the SVAKOM Pulse Pure. This manual provides essential information for the safe and effective use of your device. Please read it thoroughly before first use and retain it for future reference.

The SVAKOM Pulse Pure features patented Pulse Technology, designed to deliver targeted suction for an enhanced experience. Its ergonomic design ensures comfortable handling, and the waterproof construction allows for easy cleaning.

Image: The SVAKOM Pulse Pure product packaging, displaying the device and key features.

Important Safety Information

• Read all instructions before use.
• This product is for external use only.
• Do not use if the product appears damaged or defective.
• Discontinue use immediately if you experience any discomfort or pain.
• Keep out of reach of children.
• Consult a healthcare professional if you have any medical conditions or concerns.
• Only use water-based lubricants with this device. Oil-based lubricants can damage the silicone material.

Setup

Charging the Device

The SVAKOM Pulse Pure uses a magnetic charging system. Before first use, fully charge the device. A full charge typically takes approximately 3 hours.

1. Connect the magnetic charging cable to the charging points on the device.
2. Connect the USB end of the cable to a suitable USB power adapter (not included) or a computer USB port.
3. The indicator light will illuminate during charging and change when fully charged (refer to device for specific light indicators).

Image: Rear view of the SVAKOM Pulse Pure, highlighting the two magnetic charging points and regulatory compliance symbols.

First Use

Before initial use, clean the device as described in the "Maintenance" section. Ensure the device is fully charged.

Operating the Device

The SVAKOM Pulse Pure features intuitive controls for easy operation.

Image: Side view of the SVAKOM Pulse Pure, displaying the three control buttons: Power, Mode, and Intensity adjustment.

Controls

• Power Button: Press and hold to turn the device ON or OFF.
• Mode Button (S): Press to cycle through the 5 unique suction modes.
• Intensity Button (+/-): Press to adjust the intensity level within the selected mode. There are 5 intensity levels for each mode.

Using the Pulse Pure

1. Ensure the device is clean and charged.
2. Apply a water-based lubricant to the desired area and the device's opening.
3. Press and hold the Power Button to turn the device ON.
4. Press the Mode Button (S) to select your preferred suction pattern.
5. Use the Intensity Button (+/-) to increase or decrease the suction strength.
6. When finished, press and hold the Power Button to turn the device OFF.
7. Clean the device immediately after use.

Maintenance

Cleaning

The SVAKOM Pulse Pure is waterproof, making cleaning simple and hygienic.

1. After each use, wash the device thoroughly with warm water and a mild, antibacterial soap.
2. Rinse completely to remove all soap residue.
3. Dry the device with a lint-free cloth or allow it to air dry.
4. Do not use cleaners containing alcohol, petroleum, or acetone, as these can damage the silicone.

Storage

Store the device in a clean, dry, and cool place, away from direct sunlight and extreme temperatures. Keep it separate from other toys made of different materials to prevent material degradation.

Troubleshooting

• Device not turning on: Ensure the device is fully charged. If the issue persists, contact customer support.
• Device not charging: Check the magnetic connection and the USB cable. Try a different USB power source.
• Weak suction: Ensure the device is fully charged. Clean the suction opening to remove any debris.
• Unusual noise or vibration: Discontinue use and contact customer support.

Specifications

Warranty and Support

For warranty information, product support, or any inquiries, please visit the official SVAKOM website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

Manufacturer: SVAKOM

Date First Available: January 21, 2023