1. Introduction
Thank you for choosing the Reobrix 11026 Ferrari Daytona SP3 Building Blocks Set. This kit allows you to construct a detailed 1:16 scale replica of the iconic Ferrari Daytona SP3. Designed for enthusiasts aged 14 and up, this set provides an engaging building experience and results in an impressive display model. Please read this manual carefully before beginning assembly to ensure a smooth and enjoyable building process.
Image 1.1: The completed Reobrix 11026 Ferrari Daytona SP3 model.
2. Safety Information
This product contains small parts and is not suitable for children under 14 years of age due to choking hazards. Keep all packaging materials away from children. Adult supervision is recommended during assembly for younger builders within the recommended age range. Do not swallow any pieces. Ensure a clean and organized workspace to prevent loss of parts.
3. Package Contents
Your Reobrix 11026 set includes:
- Approximately 1069 building block pieces, sorted into numbered bags.
- One (1) detailed instruction booklet.
- One (1) sticker sheet for additional detailing.
Image 3.1: The product packaging and approximate dimensions of the assembled model.
4. Setup and Assembly
Follow the step-by-step instructions provided in the included booklet. It is recommended to:
- Prepare Your Workspace: Ensure a clean, well-lit, and flat surface for assembly.
- Organize Pieces: Open one numbered bag at a time as indicated in the instruction booklet. This helps manage the large number of pieces.
- Follow Instructions Carefully: Each step in the manual is illustrated. Pay close attention to the orientation and placement of each block.
- Apply Stickers: Use the provided sticker sheet to add authentic details to your model. Refer to the instruction booklet for correct placement.
The assembly process is designed to be straightforward, even for beginners. Patience is key to achieving a stunning final model.
Image 4.1: Side profile of the assembled model, showcasing its wide-body design.
Image 4.2: Front view of the model, highlighting the detailed grille and headlights.
5. Operating and Display
This Reobrix Ferrari Daytona SP3 model is designed for display and gentle interaction. It features working wheels and doors, allowing for dynamic posing and access to the detailed interior.
- Wheels: The wheels are designed to roll smoothly. Avoid excessive force or rough surfaces to prevent damage.
- Doors: The doors can be opened and closed to reveal the interior. Handle them gently to avoid detaching parts.
- Display: Place your completed model on a stable, flat surface away from direct sunlight, extreme temperatures, and high humidity to preserve its condition.
Image 5.1: Detailed view of the engine compartment.
Image 5.2: Close-up of the model's interior, including the steering wheel and seats.
6. Maintenance
To keep your Reobrix model in pristine condition:
- Cleaning: Gently dust the model regularly with a soft, dry cloth or a soft brush. For more stubborn dirt, lightly dampen a cloth with water (no harsh chemicals) and wipe carefully.
- Storage: If disassembling or storing the model, keep all pieces in a secure container to prevent loss or damage.
- Avoid Exposure: Protect the model from prolonged exposure to direct sunlight, which can cause discoloration, and extreme temperatures, which may affect the plastic.
7. Troubleshooting
Should you encounter any issues during assembly or with your completed model, consider the following:
- Missing Pieces: Double-check all bags and the workspace. If a piece is genuinely missing, please contact Reobrix customer support with details of the missing part (part number from the instruction manual, if available).
- Assembly Difficulties: Carefully review the previous steps in the instruction manual. Ensure all blocks are correctly oriented and firmly pressed together. Sometimes, a small error in an earlier step can affect subsequent assembly.
- Loose Connections: If parts feel loose, ensure they are fully seated. The high-quality ABS material should provide a secure fit when assembled correctly.
8. Specifications
| Specification | Detail |
|---|---|
| Brand | Reobrix |
| Model Number | 11026 |
| Scale | 1:16 |
| Number of Pieces | 1168 |
| Material Type | Acrylonitrile Butadiene Styrene (ABS) |
| Product Dimensions (L x W x H) | 52 x 40 x 8 cm |
| Item Weight | 1 Kilogram |
| Recommended Age | 14 years and up |
| Assembly Required | Yes |
| Batteries Required | No |
| Special Feature | Non Toxic |
9. Warranty and Support
Reobrix is committed to providing excellent after-sales service. If you have any questions, concerns, or require assistance with your Reobrix 11026 Ferrari Daytona SP3 Building Blocks Set, please do not hesitate to contact our customer support team. We are dedicated to finding a solution that ensures your complete satisfaction.
For warranty information or to report missing/damaged parts, please refer to the contact details provided on the product packaging or the official Reobrix website.
