Novogratz Kalissa Wide Nightstand with Wireless Charger

Introduction

Thank you for choosing the Novogratz Kalissa Wide Nightstand with Wireless Charger. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Safety Information

• Always follow assembly instructions precisely.
• Ensure all fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not overload the nightstand. The maximum weight recommendation for the top surface is 40 pounds. Each shelf can hold up to 15 pounds, and each drawer up to 20 pounds.
• Keep small parts and packaging materials away from children.
• Use on a level surface to prevent tipping.

Package Contents

Before assembly, verify that all components are present. If any parts are missing or damaged, please contact customer support.

• Engineered wood panels (top, sides, shelves, drawer fronts, etc.)
• Metal legs
• Hardware pack (screws, dowels, cam locks, handles)
• Wireless charging unit with power cable
• Assembly instructions

Setup and Assembly

Assembly of this nightstand is designed to be straightforward, utilizing the SwitchLock™ Assembly System where interlocking pieces are preassembled in the boards, and drawer slides are pre-attached to drawer sides. Two adults are recommended for assembly.

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches. Refer to the parts list in your included assembly guide to identify each piece.
2. Assemble the Main Frame: Follow the step-by-step diagrams in your assembly guide to connect the side panels, back panel, and top panel using the SwitchLock™ system and other provided hardware. Ensure all connections are secure.
3. Install Shelves: Insert the adjustable shelf into the desired position using the shelf pins.
4. Assemble and Install Drawers: Construct the two drawers according to the instructions. The drawer slides are pre-attached. Once assembled, slide the drawers into their respective compartments in the main frame. Attach the drawer handles.
5. Attach Legs: Securely fasten the metal legs to the bottom of the nightstand using the provided hardware.
6. Connect Wireless Charger: The wireless charging unit is integrated into the top panel. Route the power cable from the unit through the designated opening at the back of the nightstand. Connect the power cable to a suitable power adapter (not included) and then to a wall outlet.

Operating Instructions

Wireless Charging Function

The Novogratz Kalissa Nightstand features a built-in wireless charger on its top surface. To use:

1. Ensure the nightstand's wireless charger is connected to a power source.
2. Place your compatible mobile device directly onto the wireless charging pad located on the top surface of the nightstand.
3. The device should indicate that it is charging. If not, adjust the device's position on the pad.

Note: Wireless charging compatibility varies by device. Refer to your device's manual for wireless charging requirements.

Storage Features

• Open Shelves: The nightstand includes two open shelves, one of which is adjustable, providing easy access storage for books, decor, or other items.
• Drawers: Two spacious drawers offer concealed storage for personal items, helping to keep your bedroom organized.

Maintenance and Care

To ensure the longevity and appearance of your Novogratz Kalissa Nightstand, follow these care guidelines:

• Cleaning: Wipe surfaces with a damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
• Spills: Clean spills immediately to prevent staining or damage to the engineered wood.
• Heat and Moisture: Avoid placing hot items directly on the surface. Use coasters or protective pads. Protect from excessive moisture.
• Sunlight: Prolonged exposure to direct sunlight may cause fading or discoloration.
• Fasteners: Periodically check and tighten all assembly fasteners to maintain stability.

Troubleshooting

Wireless Charger Not Working

• Check Power: Ensure the nightstand's wireless charger is properly plugged into a functional power outlet.
• Device Compatibility: Confirm your device supports Qi wireless charging.
• Placement: Adjust the position of your device on the charging pad to ensure proper alignment with the charging coil. Remove any thick phone cases that might interfere.
• Obstructions: Ensure there are no metal objects or foreign materials between your device and the charging pad.

Drawers Sticking or Not Closing Smoothly

• Check Alignment: Ensure the drawer slides are correctly aligned and free from obstructions.
• Overload: Do not overload drawers beyond their weight capacity (20 pounds per drawer).
• Assembly: Verify that the drawers were assembled correctly and that all screws on the slides are tightened.

Nightstand Wobbles

• Level Surface: Ensure the nightstand is placed on a flat, level surface.
• Tighten Fasteners: Re-tighten all assembly screws and bolts.

Specifications

Warranty Information

This Novogratz Kalissa Wide Nightstand is covered by a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage resulting from improper assembly, misuse, abuse, accidents, or normal wear and tear. Please retain your proof of purchase for warranty claims.

Customer Support

For assistance with assembly, missing parts, or warranty inquiries, please contact Novogratz customer support. Refer to your purchase documentation or the Novogratz official website for contact details.