Brydge Stone CORE 10-Port 100W Docking Station

Introduction

The Brydge Stone CORE is a versatile 10-port docking station designed to expand the connectivity and power delivery capabilities of your laptop. It provides a single connection point for multiple peripherals, external displays, and network access, while also delivering up to 100W of power to your host device. This manual provides instructions for setting up, operating, and maintaining your docking station, along with troubleshooting tips and product specifications.

Setup Instructions

Follow these steps to set up your Brydge Stone CORE docking station:

1. Connect Power: Plug the provided power adapter into the DC 24V-in port on the docking station, then connect the adapter to a wall outlet.
2. Connect to Host Device: Use the included USB-C cable to connect the docking station's USB-C Host Port to a compatible USB-C port on your laptop or computer. This port is essential for the dock to function.
3. Connect Peripherals: Connect your external monitors, USB devices (keyboards, mice, external drives), Ethernet cable, and SD cards to the corresponding ports on the docking station.

Operating Instructions

Once connected, the Brydge Stone CORE docking station operates largely plug-and-play. Here are key operational aspects:

• Power Button: The power button on the front of the docking station controls its power state. Press to turn on or off.
• Power Delivery: The docking station delivers up to 100W of power to your connected laptop via the USB-C host connection, ensuring your device remains charged during use.
• Display Output: Connect external monitors using the HDMI 2.1 (up to 8K@30Hz) and DisplayPort 1.4 (up to 4K@60Hz) ports. For Windows devices, dual 4K external displays at 60Hz are supported.
• USB Connectivity: Utilize the 2x USB-C and 4x USB-A 3.1 ports for connecting various peripherals such as external hard drives, keyboards, mice, and other USB devices. These ports support data transfer speeds up to 5Gbps.
• SD Card Reader: Insert SD 4.0 cards into the dedicated slot for fast data transfers up to 2.4Gbps (300MB/s).
• Gigabit Ethernet: Connect an Ethernet cable to the RJ45 port for a stable and fast wired network connection up to 1Gbps.

Maintenance

To ensure the longevity and optimal performance of your Brydge Stone CORE docking station, follow these maintenance guidelines:

• Cleaning: Use a soft, dry, lint-free cloth to clean the exterior of the docking station. Avoid using harsh chemicals, solvents, or abrasive cleaners.
• Ventilation: Ensure the docking station is placed in a well-ventilated area to prevent overheating. Do not block any ventilation openings.
• Cable Management: Keep cables organized and free from kinks or excessive bending to prevent damage to the cables and ports.
• Storage: When not in use for extended periods, disconnect the docking station from power and store it in a cool, dry place.

Troubleshooting

If you encounter issues with your Brydge Stone CORE docking station, refer to the following common problems and solutions:

• No Display Output:
  • Ensure the host USB-C cable is securely connected to both the docking station and your computer.
  • Verify that the external monitor is powered on and set to the correct input source (HDMI/DisplayPort).
  • Try a different HDMI or DisplayPort cable.
  • Restart your computer and the docking station.
  • For macOS users, ensure your system is updated and check display settings. Some users have reported issues with Mac devices not waking from standby when connected to certain docks; disconnecting and reconnecting the dock or restarting the Mac may resolve this.
• Slow Charging or No Charging:
  • Confirm the power adapter is correctly connected to the docking station and a working power outlet.
  • Ensure your laptop supports USB-C Power Delivery and that the host USB-C port is capable of receiving power.
  • Check if your laptop's power requirements exceed the 100W provided by the dock.
• Inconsistent Connectivity (USB, Ethernet, SD Card):
  • Disconnect and reconnect the problematic peripheral.
  • Try connecting the peripheral to a different port on the docking station.
  • Ensure all drivers for your computer and peripherals are up to date.
  • Restart the docking station and your computer.
• Dual Monitor Functionality Issues (Windows):
  • Ensure your Windows operating system is fully updated.
  • Check your display settings in Windows to ensure monitors are detected and configured correctly (e.g., Extend, Duplicate).
  • Verify that your graphics card drivers are current.

Specifications

Warranty and Support

For warranty information and technical support, please refer to the official Brydge website or contact their customer service. Keep your purchase receipt for warranty claims.

Online Support: Visit the Brydge Store for product information and support resources.