1. Product Overview
The Trak Racer Tablet and Button Box Mount Upgrade Kit (Model TR-TSH4) is designed to integrate a tablet or button box into your sim racing cockpit setup. This mount provides adjustable positioning for essential race data, controls, and telemetry applications, enhancing accessibility and ergonomics during racing sessions.
Key Features:
- Side Mount Compatibility: Allows mounting of a tablet or button box to either the left or right side of the wheel.
- Wide Rig Compatibility: Compatible with Trak Racer TR8 Pro, Alpine Racing TRX, and most aluminum profile cockpits featuring standard 8mm slot profiles.
- Fully Adjustable Fit: Offers customizable height, angle, and reach to accommodate various tablets and sim racing button boxes.
- Durable Construction: Manufactured from laser-cut iron with a matte black finish for long-lasting performance.
- Easy Installation: Includes all necessary tools, screws, and mounting hardware for straightforward setup.
- Seamless Integration: Engineered for direct fitment with Trak Racer simulators.
2. Package Contents
Verify that all components are present in the package:
- Trak Racer - Tablet and Button Box Upgrade Mount for TR8 Pro and Alpine Racing TRX
- Mounting Hardware (screws, nuts, washers)
- Required Installation Tools
3. Installation Guide
Follow these steps to install the Trak Racer Tablet and Button Box Mount onto your sim racing rig.
Compatibility Check:
Ensure your sim racing rig is compatible with the mount. This mount is designed for Trak Racer TR8 Pro, Alpine Racing TRX, and aluminum profile cockpits with standard 8mm slot profiles.
Image 1: Trak Racer Tablet and Button Box Mount shown installed on a compatible sim racing cockpit.
Mounting Steps:
- Identify Mounting Location: Determine the desired position for your tablet or button box, either to the left or right of your wheel.
- Attach Base Bracket: Secure the base bracket of the mount to the side of your cockpit's frame using the provided hardware. For 8mm aluminum profiles, slide the T-nuts into the profile slot and fasten the bracket. For TR8 Pro or TRX cockpits, align with the designated mounting points.
- Assemble Arm Components: Connect the adjustable arm sections as shown in the diagrams, ensuring all bolts are finger-tight initially.
- Attach Tablet/Button Box Holder: Secure the tablet or button box holder to the end of the adjustable arm.
- Mount Device: Place your tablet or button box into the holder. Ensure it is securely gripped.
- Adjust and Tighten: Adjust the height, angle, and reach of the mount to your preferred ergonomic position. Once satisfied, securely tighten all bolts using the provided tools to prevent movement during use.
Image 2: Detailed view of the mount's adjustable arm and device holder.
4. Operation and Adjustment
The Trak Racer Tablet and Button Box Mount offers flexibility in positioning your device. To adjust the mount:
- Height Adjustment: Loosen the bolts on the vertical arm sections to slide the mount up or down. Retighten firmly once the desired height is achieved.
- Angle and Tilt Adjustment: The pivot points on the arm allow for angular adjustments. Loosen the corresponding bolts, set the desired angle for your tablet or button box, and then retighten.
- Reach Adjustment: The horizontal arm sections can be extended or retracted. Loosen the connecting bolts, adjust the reach, and retighten to secure the position.
Always ensure all adjustment bolts are securely tightened before using your sim racing setup to prevent accidental movement or damage to your device.
Image 3: Side view illustrating the mount's pivot points for angle and reach adjustments.
5. Care and Maintenance
To ensure the longevity and optimal performance of your Trak Racer Tablet and Button Box Mount, follow these maintenance guidelines:
- Cleaning: Wipe the mount with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners or solvents that could damage the matte black finish.
- Inspection: Periodically check all bolts and connections to ensure they remain tight. Retighten any loose fasteners to maintain stability.
- Storage: If disassembling or storing the mount, keep all components and hardware together in a safe place to prevent loss.
6. Troubleshooting
If you encounter any issues with your Trak Racer Tablet and Button Box Mount, consider the following:
- Mount is unstable/wobbly: Ensure all mounting bolts and adjustment fasteners are fully tightened. Check that the mount is correctly seated on your cockpit's frame or profile.
- Device does not fit in holder: Verify that your tablet or button box dimensions are within the adjustable range of the holder. Adjust the holder's grips as needed.
- Difficulty adjusting position: Loosen the relevant adjustment bolts sufficiently before attempting to reposition the mount. Do not force adjustments.
For persistent issues, refer to the customer support section.
7. Product Specifications
| Specification | Detail |
|---|---|
| Model Number | TR-TSH4 |
| Product Dimensions | 15.55 x 8.07 x 7.09 inches |
| Item Weight | 22 pounds |
| Material | Laser-cut Iron |
| Finish | Matte Black |
| Compatibility | Trak Racer TR8 Pro, Alpine Racing TRX, 8mm Profile Aluminum Rigs |
8. Warranty Information
The Trak Racer Tablet and Button Box Mount Upgrade Kit is covered by the manufacturer's standard warranty. For specific details regarding warranty terms, duration, and claims process, please refer to the official Trak Racer website or contact their customer support directly. Please retain your proof of purchase for any warranty claims.
9. Customer Support
For further assistance, technical support, or inquiries regarding your Trak Racer Tablet and Button Box Mount, please visit the official Trak Racer website or contact their customer service department. Contact information can typically be found on the manufacturer's website under a 'Support' or 'Contact Us' section.