TESSAN TS-T1-GR-US
Contents
TESSAN Digital Timer Outlet TS-T1-GR-US User Manual
Model: TS-T1-GR-US
1. Introduction
Thank you for choosing the TESSAN Digital Timer Outlet. This device is designed to automate the power supply to your electrical appliances, offering various programmable modes to enhance convenience and energy efficiency. Please read this manual carefully before use to ensure proper operation and to maximize the benefits of your timer.
2. Product Overview
The TESSAN Digital Timer Outlet provides precise control over your devices with multiple programming options.
Key Features:
- Up to 20 Daily ON/OFF Programs
- Countdown Function
- Cycle ON/OFF Function
- Random Mode (for security)
- 12/24-Hour Clock Display
- Daylight Saving Time (DST) Adjustment
- Built-in Battery for Programming without Power
Components:
Familiarize yourself with the timer's buttons and display:

Figure 1: Front view of the TESSAN Digital Timer Outlet.

Figure 2: Labeled components of the TESSAN Digital Timer Outlet.
- Digital Display: Shows time, day, and program status.
- Decrease (-) / Increase (+) Buttons: Adjust values during setting.
- Setting Button (≡): Enters programming mode.
- Back Button (↵): Returns to the previous screen or main interface.
- Confirm (OK) Button: Confirms selections.
- ON/AUTO/OFF Button: Cycles through manual ON, automatic, and manual OFF modes.
- Reset Button (R): Clears all settings and resets the timer.
- LED Indicator: Indicates power status or active mode.
- AC Receptacle: Where the appliance is plugged in.
3. Initial Setup
Before first use, or after a long period of inactivity, follow these steps:
- Charge Internal Battery: Plug the timer into a live wall outlet for at least 30 minutes to charge its internal battery. This allows programming without the timer being plugged in.
- Reset the Timer: Use a small pointed object (like a pen tip) to press the Reset (R) button. This clears all previous settings.
- Set Current Time:
- Press the Setting (≡) button once. The display will show the current time setting.
- Use the (+) and (-) buttons to adjust the hour, then press OK.
- Repeat for minutes and day of the week.
- Press OK to confirm the current time.
- 12/24-Hour Format: While setting the time, you can toggle between 12-hour (AM/PM) and 24-hour formats by pressing the (+) and (-) buttons simultaneously.
- Daylight Saving Time (DST): To activate or deactivate DST, press the ON/AUTO/OFF button and the (+) button simultaneously. The clock will adjust by one hour.
4. Programming Operating Modes
The TESSAN Digital Timer Outlet offers several modes to suit various needs.
4.1. PROG Mode (Daily ON/OFF Timers)
This mode allows you to set specific ON and OFF times for your connected appliance for up to 20 different programs.

Figure 3: Example of setting ON and OFF times in PROG Mode.
- Press the Setting (≡) button repeatedly until 'PROG' appears on the display.
- The display will show '01 ON'. Use (+) and (-) to select the desired days for this program (e.g., MO TU WE TH FR SA SU for all days, or specific days). Press OK.
- Set the desired ON hour using (+) and (-), then press OK.
- Set the desired ON minute using (+) and (-), then press OK.
- The display will now show '01 OFF'. Repeat the day, hour, and minute setting process for the OFF time.
- After setting the OFF time, press OK. The display will show '02 ON', allowing you to set the next program.
- To exit programming mode, press the Back (↵) button. Ensure the timer is in AUTO mode for programs to run.
4.2. Countdown Mode
This mode allows the connected appliance to turn ON or OFF after a set countdown period.

Figure 4: Countdown Mode in use with holiday lights.
- Press the Setting (≡) button repeatedly until 'COUNTDOWN' appears.
- Use (+) and (-) to set the desired countdown duration in hours and minutes.
- Press OK to confirm.
- The countdown will begin. Once the countdown finishes, the connected appliance will switch its state (e.g., if it was ON, it will turn OFF).
4.3. Cycle Mode
Ideal for applications requiring repetitive ON/OFF intervals, such as aquarium pumps.

Figure 5: Cycle Mode settings for an aquarium pump.
- Press the Setting (≡) button repeatedly until 'CYCLE' appears.
- Set the desired ON duration (hours and minutes) using (+) and (-). Press OK.
- Set the desired OFF duration (hours and minutes) using (+) and (-). Press OK.
- The cycle will begin, repeating the ON and OFF intervals.
4.4. Random Mode (Leaving Mode)
This mode randomly turns the connected light or appliance ON and OFF within a set period to simulate occupancy, enhancing home security when you are away.

Figure 6: Random Mode activated to deter intruders.
- Press the Setting (≡) button repeatedly until 'RANDOM' appears.
- Press OK to activate Random Mode. The timer will randomly turn the appliance ON and OFF within a predefined window (e.g., 6 PM to 6 AM).
- To deactivate, press the Setting (≡) button again until 'RANDOM' disappears or cycle through modes.
5. Operating the Timer
After programming, ensure the timer is in the correct operating mode:
- Press the ON/AUTO/OFF button to cycle through the modes:
- ON: The connected appliance is continuously ON, overriding all programs.
- AUTO: The connected appliance operates according to the programmed settings (PROG, Countdown, Cycle, Random). This is the default mode for programmed operation.
- OFF: The connected appliance is continuously OFF, overriding all programs.
For your programs to function, the timer must be set to AUTO mode.
6. Troubleshooting
If you encounter issues with your TESSAN Digital Timer Outlet, refer to the following common solutions:
- Timer Display is Blank:
- Ensure the timer is plugged into a live outlet.
- The internal battery might be depleted. Plug the timer in for at least 30 minutes to charge.
- Appliance Not Turning ON/OFF as Programmed:
- Verify the timer is in AUTO mode.
- Double-check your program settings (ON/OFF times, days of the week) for accuracy.
- Ensure the appliance itself is switched ON.
- Confirm the appliance is properly plugged into the timer's receptacle.
- Difficulty with Programming:
- Carefully follow the step-by-step instructions for each mode.
- Press the OK button after each selection to confirm.
- If confused, perform a Reset (R) and start programming from the beginning.
- Timer Making Noise:
- This digital timer is designed to be silent. If you hear noise, discontinue use and contact customer support.
7. Specifications
| Attribute | Value |
|---|---|
| Model Number | TS-T1-GR-US |
| Voltage | 125V~ |
| Current | 15A Max |
| Power Rating | 1875W Max |
| Number of Settings | Up to 20 ON/OFF programs |
| Dimensions | 9.6 x 6.5 x 5.89 cm (approximate) |
| Item Weight | 118 g |
8. Safety Information
Please observe the following safety precautions:
- For indoor use only.
- Do not exceed the maximum load rating of 15A, 1875W.
- Do not immerse in water or expose to excessive moisture.
- Do not disassemble or attempt to repair the device.
- Keep out of reach of children.
- Ensure the timer is securely plugged into a grounded outlet.
9. Warranty and Support
TESSAN products are designed for reliability and performance. For warranty information or technical support, please contact TESSAN customer service through the retailer where the product was purchased or visit the official TESSAN website.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.