Ledwood Titan Wireless Earbuds User Manual

1. Product Overview

The Ledwood Titan Wireless Earbuds offer a premium audio experience with a sleek, robust metallic design. Featuring Bluetooth 5.1 connectivity, these earbuds provide a stable wireless connection up to 10 meters. Enjoy up to 4 hours of playback on a single charge, with an additional 14 hours provided by the charging case, totaling 18 hours of battery life. The earbuds are IPX4 water-resistant, making them suitable for active lifestyles. Equipped with SuperBass technology and noise cancellation capabilities, they deliver rich, powerful sound. Charging is convenient via USB-C.

Figure 1: Ledwood Titan Wireless Earbuds in their open charging case.

2. Setup

2.1 Charging the Earbuds and Case

Before first use, fully charge the earbuds and the charging case.

1. Place the earbuds into the charging case, ensuring they are correctly seated.
2. Connect the USB-C charging cable to the port on the charging case and plug the other end into a compatible USB power source.
3. The indicator light on the case will show charging status. A full charge typically takes about 2 hours.

Figure 2: Charging the Ledwood Titan earbuds and case via USB-C.

2.2 Pairing with a Device

Follow these steps to pair your Ledwood Titan earbuds with a Bluetooth-enabled device:

1. Ensure the earbuds are charged and inside the charging case.
2. Open the charging case. The earbuds will automatically enter pairing mode, indicated by a flashing LED light on the earbuds.
3. On your device (smartphone, tablet, etc.), go to Bluetooth settings and turn Bluetooth on.
4. Search for available devices. Select "Ledwood Titan" from the list.
5. Once connected, the LED indicator on the earbuds will stop flashing, indicating successful pairing.

3. Operating Instructions

3.1 Power On/Off

• Power On: Open the charging case, and the earbuds will automatically power on. Alternatively, press and hold the touch control area on both earbuds for 3 seconds.
• Power Off: Place the earbuds back into the charging case and close the lid. Alternatively, press and hold the touch control area on both earbuds for 5 seconds.

3.2 Music Playback

• Play/Pause: Tap the touch control area on either earbud once.
• Next Track: Double-tap the touch control area on the right earbud.
• Previous Track: Double-tap the touch control area on the left earbud.

3.3 Call Management

• Answer/End Call: Tap the touch control area on either earbud once.
• Reject Call: Press and hold the touch control area on either earbud for 2 seconds.

3.4 Voice Assistant

• Activate Voice Assistant: Triple-tap the touch control area on either earbud.

Figure 3: Top view of Ledwood Titan earbuds, highlighting the touch control areas.

4. Maintenance

4.1 Cleaning

• Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
• Do not use abrasive cleaners, alcohol, or chemical solvents.
• Gently remove any earwax or debris from the ear tips and speaker mesh using a small, soft brush or cotton swab.

4.2 Storage

• When not in use, store the earbuds in their charging case to protect them and keep them charged.
• Avoid storing the device in extreme temperatures (hot or cold) or in highly humid environments.

5. Troubleshooting

6. Specifications

7. Warranty and Support

Specific warranty details and support contact information are not provided in this manual. For warranty claims, technical support, or further assistance, please refer to the documentation included with your purchase or visit the official Ledwood website.