Introduction
Thank you for choosing the Ledwood TWS Titanium Headphones, model LD-S20. These true wireless stereo earbuds are designed to provide a high-quality audio experience with the convenience of Bluetooth 5.1 connectivity. This manual will guide you through the setup, operation, and maintenance of your new headphones.
Package Contents
- Ledwood TWS Titanium Headphones (Left and Right Earbuds)
- Wireless Charging Case
- USB-C Charging Cable (typically included)
- User Manual (This Document)
Product Overview
Familiarize yourself with the components of your Ledwood TWS Titanium Headphones.
Image 1: The Ledwood TWS Titanium Headphones, electric blue color, resting inside their open charging case. The earbuds are visible, along with the charging contacts and the Ledwood logo on the case.
- Earbuds: Left and Right earbuds with touch control surfaces and silicone ear tips.
- Charging Case: Protects and charges the earbuds. Features a charging indicator light and a USB-C charging port.
Setup
1. Charging the Headphones and Case
Before first use, ensure both the earbuds and the charging case are fully charged.
- Place the earbuds into the charging case. Ensure they are correctly seated; magnetic contacts will hold them in place.
- Connect the charging case to a power source using the provided USB-C cable.
- The indicator light on the charging case will illuminate to show charging status.
- A full charge for the case typically takes approximately 2 hours. The earbuds will charge automatically when placed in the powered case.
Image 2: Front view of the Ledwood TWS Titanium Headphones in their open charging case, highlighting the earbuds and the charging indicator light below the Ledwood logo.
2. Bluetooth Pairing
Pair your headphones with your device (smartphone, tablet, etc.) to begin listening.
- Power On: Open the charging case, and the earbuds will automatically power on and enter pairing mode. You may hear an audible prompt.
- Activate Bluetooth: On your device, go to the Bluetooth settings and ensure Bluetooth is enabled.
- Select Device: Look for "LD-S20" or "Ledwood LD-S20" in the list of available devices and select it to connect.
- Confirmation: Once successfully paired, you will hear a confirmation tone or voice prompt from the earbuds. The earbuds are now ready for use.
- Automatic Reconnection: After initial pairing, the earbuds will automatically connect to the last paired device when removed from the case, provided Bluetooth is active on the device.
Operating Instructions
The Ledwood TWS Titanium Headphones feature touch controls for easy management of audio playback and calls.
Image 3: Front view of the two Ledwood TWS Titanium Earbuds, positioned side-by-side, highlighting their sleek design and the touch-sensitive area on each earbud.
Power On/Off
- Power On: Open the charging case, or long-press the touch control area on both earbuds for approximately 3 seconds.
- Power Off: Place the earbuds back into the charging case and close the lid, or long-press the touch control area on both earbuds for approximately 5 seconds.
Music Control
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap the right earbud.
- Previous Track: Double tap the left earbud.
- Volume Up: Triple tap the right earbud.
- Volume Down: Triple tap the left earbud.
Call Management
- Answer/End Call: Single tap on either earbud during an incoming call or active call.
- Reject Call: Long-press on either earbud for 2 seconds during an incoming call.
Voice Assistant
- Activate Voice Assistant: Long-press on either earbud for 2 seconds (when not on a call).
Maintenance
Proper care and maintenance will extend the lifespan of your headphones.
Cleaning
- Use a soft, dry, lint-free cloth to clean the earbuds and charging case.
- Do not use abrasive cleaners, alcohol, or chemical solvents.
- Gently clean the ear tips and charging contacts to ensure optimal performance.
Storage
- When not in use, always store the earbuds in their charging case to protect them and keep them charged.
- Store the device in a cool, dry place, away from extreme temperatures and direct sunlight.
The headphones are rated IPX4 water resistant, meaning they are protected against splashing water from any direction. They are not designed for submersion in water.
Troubleshooting
If you encounter issues, try the following solutions:
| Problem | Possible Solution |
|---|---|
| Earbuds not pairing with device |
|
| No sound from one or both earbuds |
|
| Charging case not charging |
|
| Touch controls unresponsive |
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | LD-S20 |
| Connectivity Technology | Wireless |
| Wireless Communication Technology | Bluetooth 5.1 |
| Bluetooth Range | Up to 10 Meters (33 feet) |
| Battery Life (Earbuds) | Approximately 4 Hours |
| Charging Time (Case) | Approximately 2 Hours |
| Control Method | Touch |
| Water Resistance Level | IPX4 (Water Resistant) |
| Frequency Range | 20Hz - 20,000Hz |
| Material | Metal |
| Included Components | Wireless Charging Case |
| Item Weight | 6.8 ounces |
| Manufacturer | Ledwood |
Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Ledwood customer service directly. Details can typically be found on the official Ledwood website or through your retailer.
