ARREGUI Safe Support P180070 Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the proper installation, usage, and maintenance of the ARREGUI Safe Support, model P180070. This support is designed to elevate compatible ARREGUI Plus C safes, enhancing accessibility and ensuring stable placement. Please read these instructions carefully before installation to ensure correct setup and optimal performance.

2. Product Overview

The ARREGUI Safe Support P180070 is a robust base designed to integrate seamlessly with specific ARREGUI Plus C safe models. Its primary function is to raise the safe to a more convenient height for user access and to provide a stable foundation.

2.1 Key Features

Elevated Positioning: Raises the safe to a comfortable height for easier access.
Pre-drilled Holes: Includes pre-drilled holes for secure attachment of the safe to the support.
Stable Base: Equipped with feet to ensure the stability of the safe.
Matching Design: Features a black finish, consistent with ARREGUI Plus C safes.

2.2 Compatibility

This support is exclusively compatible with the following ARREGUI Plus C safe models:

ARREGUI Plus C 180040
ARREGUI Plus C 180050
ARREGUI Plus C 180070
ARREGUI Plus C 180140
ARREGUI Plus C 180150
ARREGUI Plus C 180170
ARREGUI Plus C 180340
ARREGUI Plus C 180350
ARREGUI Plus C 180370

Figure 1: The ARREGUI Safe Support P180070. This image displays the black metal base with its structural design and pre-drilled holes for safe attachment.

3. Setup and Installation

Follow these steps to correctly install your ARREGUI Safe Support P180070 and secure your compatible ARREGUI Plus C safe.

Unpack Components: Carefully remove the safe support from its packaging. Inspect for any damage.
Choose Location: Select a flat, stable, and level surface for the safe and its support. Ensure the chosen location can bear the combined weight of the safe, its contents, and the support.
Position the Support: Place the ARREGUI Safe Support P180070 in the desired location.
Place the Safe: Carefully lift your compatible ARREGUI Plus C safe and align its base with the top surface of the support. Ensure the safe's pre-drilled holes align with the corresponding holes on the support.
Secure the Safe: Using appropriate fasteners (not included, typically supplied with the safe or purchased separately), secure the safe to the support through the aligned holes. Tighten all fasteners firmly but do not overtighten.
Verify Stability: Gently test the stability of the assembled safe and support. It should not wobble or shift. If instability is detected, re-check the alignment and tightness of fasteners, and ensure the floor surface is level.

Important: Always ensure the safe is empty before attempting to lift or move it. Seek assistance if the safe is too heavy to handle safely.

4. Usage and Operation

Once installed, the ARREGUI Safe Support P180070 operates passively by providing an elevated and stable platform for your safe. No active operation is required from the support itself.

Accessibility: The elevated position allows for easier access to the safe's contents without excessive bending.
Stability: The support's design, combined with proper installation, ensures the safe remains stable during opening, closing, and access.

5. Maintenance

The ARREGUI Safe Support P180070 requires minimal maintenance to ensure its longevity and continued performance.

Cleaning: Wipe the support with a soft, damp cloth to remove dust and dirt. Avoid abrasive cleaners or solvents that could damage the finish.
Periodic Inspection: Periodically check the fasteners connecting the safe to the support to ensure they remain tight. Re-tighten if necessary.
Stability Check: Occasionally verify the overall stability of the safe and support assembly.

6. Troubleshooting

If you encounter issues with the stability or placement of your safe on the support, refer to the following:

Problem	Possible Cause	Solution
Safe wobbles or is unstable.	Fasteners are loose. Surface is uneven. Safe not properly aligned on support.	Tighten all fasteners securely. Move the assembly to a level surface or use shims to level the support's feet. Re-position the safe to ensure proper alignment with the support's holes.
Difficulty aligning safe with support holes.	Incorrect safe model. Safe or support is not level.	Verify your safe is one of the compatible ARREGUI Plus C models listed in Section 2.2. Ensure both the safe and the support are on a level surface before attempting to align.

7. Specifications

Attribute	Detail
Brand	ARREGUI
Model Number	P180070
Product Dimensions (L x W x H)	37.5 x 35.5 x 10 cm
Color	Black
Type of Fixation	Floor mounting (for safe to support)
Compatible Safe Models	ARREGUI Plus C 180040, 180050, 180070, 180140, 180150, 180170, 180340, 180350, 180370

8. Warranty and Support

Information regarding the specific warranty terms for the ARREGUI Safe Support P180070 is not available in this document. For warranty details, technical support, or further assistance, please contact ARREGUI customer service directly or refer to the official ARREGUI website.

ARREGUI P180070