SUNCREAT 2-in-1 Convertible Hammock with Stand Instruction Manual

Introduction

Thank you for choosing the SUNCREAT 2-in-1 Convertible Hammock with Stand. This product is designed to provide versatile relaxation, functioning as both a comfortable double hammock and a relaxing hammock chair. This manual provides essential information for safe assembly, operation, and maintenance of your new hammock system.

Safety Information

Please read and understand all safety warnings before assembly and use. Failure to follow these instructions may result in serious injury or product damage.

• Ensure the hammock is set up on stable, level ground.
• Do not exceed the maximum weight capacity of 475 pounds.
• Inspect the hammock fabric, ropes, and stand for any signs of wear, tears, or damage before each use. Discontinue use if any damage is found.
• Keep children and pets away from the hammock during assembly and ensure they are supervised when using the hammock.
• Do not stand on the hammock or use it as a swing set.
• Avoid sharp objects near the hammock fabric.

Package Contents

Verify that all components are present before beginning assembly:

• 1 x Double Hammock Bed (Dark Grey)
• 1 x Hammock Chair (Dark Grey)
• 1 x Convertible Hammock Stand (Steel)
• Assembly Hardware (Steel Hooks, Spring-pins, etc.)

Setup Instructions

Assembling the Stand

The stand is designed for easy assembly and conversion. Follow these steps:

1. Unpack all stand components. Identify the base tubes and upright support tubes.
2. Connect the base tubes by aligning the spring-pins with the corresponding holes and pushing them together until they click into place.
3. Attach the upright support tubes to the ends of the assembled base. Ensure the hooks face upwards and outwards.
4. Verify all connections are secure before proceeding.

Converting the Stand (Hammock to Chair)

The patented 2-in-1 stand can be easily converted between hammock and hammock chair configurations:

1. To convert from hammock to chair mode, shorten the central tube (Tube E) by sliding it inwards.
2. Rotate the side tubes (Tube B) by 180 degrees to adjust the angle of the upright supports. This will create a more upright structure suitable for the hammock chair.
3. Reverse these steps to convert back to hammock mode.

Attaching the Hammock or Chair

1. For the double hammock: Hook the metal thimbles at both ends of the hammock bed onto the steel hooks of the stand.
2. For the hammock chair: Hook the metal thimbles of the hammock chair onto the steel hooks of the stand.
3. Adjust the height of the hammock or chair by selecting different rope loops to hook onto the stand, allowing for up to six height adjustments.

Setup Videos

Operating Instructions

Using the Double Hammock

Once assembled in hammock mode, gently sit or lie down in the center of the hammock. The poly-cotton fabric is designed to be skin-friendly and breathable, providing a comfortable cocoon-style experience. The 18 tightly braided ropes ensure stability and support.

Using the Hammock Chair

After converting the stand to chair mode, the extra-large hammock chair offers ample space for sitting comfortably. The side pocket provides convenient storage for small items like a book or phone. Sit upright and enjoy the relaxed seating position.

Maintenance

Proper maintenance will extend the life of your SUNCREAT hammock and stand.

• Cleaning Fabric: The poly-cotton fabric can be spot cleaned with mild soap and water. Allow to air dry completely. Do not use harsh chemicals or bleach.
• Cleaning Stand: Wipe the steel stand with a damp cloth to remove dirt and debris. Dry thoroughly to prevent rust.
• Storage: When not in use for extended periods, especially during inclement weather, disassemble the hammock and stand. Store components in a dry, protected area to prevent damage and prolong product life.
• Inspection: Regularly check all ropes, fabric, and stand connections for wear, fraying, or loosening. Tighten any loose connections and replace worn parts as necessary.

Troubleshooting

If you encounter issues with your SUNCREAT hammock, refer to the following common solutions:

• Hammock feels unstable: Ensure all stand connections are fully engaged and the spring-pins are locked. Check that the stand is on a flat, stable surface.
• Hammock sags too much: Adjust the height by hooking the hammock ropes to a higher position on the stand's hooks.
• Difficulty converting stand: Ensure the central tube (Tube E) is fully shortened or extended as required for the desired mode, and that the side tubes (Tube B) are rotated correctly. Refer to the setup instructions and video.
• Rust on metal parts: While the stand is powder-coated, prolonged exposure to moisture can cause rust. Clean and dry metal parts regularly. Consider applying a rust-inhibiting spray if used in humid environments.

If problems persist, please contact SUNCREAT customer support.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact SUNCREAT customer service directly. Contact details can typically be found on the manufacturer's website or through your point of purchase.

Online Support: Visit the SUNCREAT Store on Amazon for additional product information and support resources.