LEXXSON Android 10.1 Carplay Car Radio User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your LEXXSON Android 10.1 Carplay Car Radio. This unit is specifically designed for BMW X3 E83 models from 2004 to 2010, offering advanced features such as Android 10.1 operating system, wireless Carplay, wired Android Auto, GPS navigation, Bluetooth 4.1, and multimedia playback.

Please read this manual thoroughly before installation and use to ensure proper functionality and to avoid damage to the unit or your vehicle.

2. What's in the Box

Upon unpacking, please verify that all components listed below are present and in good condition:

• LEXXSON Android 10.1 Carplay Car Radio Unit (with pre-installed frame kit)
• Wire Harness (specific for BMW X3 E83 2004-2010)
• GPS Antenna
• 2 x USB Cables
• RCA Input/Output Cables
• Microphone
• Camera Input Cable

Image: Included components for the LEXXSON Android 10.1 Carplay Car Radio.

3. Installation Guide

This unit is designed for plug-and-play installation in BMW X3 E83 models (2004-2010). No additional parts are typically required. Professional installation is recommended.

3.1 Safety Precautions

• Disconnect the vehicle's battery before starting installation to prevent electrical shorts.
• Ensure all wires are properly insulated and secured to prevent damage or interference.
• Do not obstruct airbags or other safety features during installation.

3.2 Installation Steps (General)

1. Remove the Original Radio: Carefully remove the existing car radio and trim panels from your BMW X3 E83. Refer to your vehicle's service manual for specific instructions on panel removal.
2. Connect Wiring Harness: Connect the provided wiring harness to the vehicle's existing wiring. Ensure all connections are secure.
3. Connect Peripherals:
   • Connect the GPS antenna and position it in a location with a clear view of the sky (e.g., dashboard).
   • Connect the USB cables for external devices.
   • Connect the microphone for hands-free calling.
   • If installing a rear camera, connect the camera input cable.
4. Mount the New Unit: Securely mount the LEXXSON car radio unit into the dashboard opening.
5. Test Functionality: Reconnect the vehicle's battery and power on the unit to test basic functions (power, audio, touch screen).
6. Reassemble: Carefully reassemble the trim panels.

Image: Before and After Installation of the Car Radio.

4. Initial Setup

After successful installation and powering on the unit, follow these steps for initial configuration:

1. Language Selection: Choose your preferred system language from the settings menu.
2. Time and Date: Set the correct time zone, date, and time. This can often be synchronized automatically via GPS or network.
3. Wi-Fi Connection: Connect to an available Wi-Fi network to enable online features, app downloads, and system updates. Go to Settings > Network & Internet > Wi-Fi.
4. GPS Calibration: Ensure the GPS antenna is properly connected and the unit can acquire a satellite signal for accurate navigation.

5. Operating Instructions

5.1 GPS Navigation

The unit supports both online and offline navigation. You can download your preferred navigation applications from the Google Play Store (or Apple Store if applicable for Carplay apps).

• Using Navigation Apps: Tap the navigation icon on the home screen or select your installed navigation app.
• Online/Offline Maps: Ensure you have downloaded offline maps if you plan to navigate without an internet connection.

Image: GPS Navigation interface displaying a route.

5.2 Wireless Carplay

Connect your iPhone wirelessly to access Carplay features directly on the touchscreen display. Carplay will connect automatically when you start the engine after initial pairing.

1. Enable Bluetooth: On your iPhone, ensure Bluetooth is enabled.
2. Pair Device: On the car radio, go to Bluetooth settings and search for your iPhone. Pair the devices.
3. Activate Carplay: Once paired, Carplay should automatically launch or prompt you to activate it.

Image: Wireless Carplay interface.

5.3 Wired Android Auto

Connect your Android phone via USB to use Android Auto. The unit will automatically switch to Android Auto mode upon connection.

1. Install Android Auto App: Ensure the Android Auto app is installed on your Android phone.
2. Connect via USB: Use a high-quality USB cable to connect your Android phone to one of the car radio's USB ports.
3. Grant Permissions: Follow any on-screen prompts on your phone and the car radio to grant necessary permissions.

Image: Wired Android Auto interface.

5.4 Bluetooth 4.1

The built-in Bluetooth 4.1 allows for hands-free calling and audio streaming from your mobile phone.

• Pairing: Go to the Bluetooth menu on the car radio, enable Bluetooth on your phone, and select the car radio from the list of available devices to pair.
• Hands-Free Calling: Once paired, you can make and receive calls directly from the car radio's screen. Your phonebook can be synchronized.
• Audio Streaming: Play music from your phone through the car's speakers via Bluetooth Audio (A2DP).

Image: Bluetooth 4.1 interface for phone calls and music.

5.5 Multimedia Playback (1080P Video Support)

The unit supports various multimedia formats, including 1080P video, allowing passengers to enjoy movies and other content.

• USB Playback: Connect a USB drive containing media files to one of the USB ports.
• Internal Storage: Use the built-in 32GB flash memory for offline music, navigation map data, and videos.
• Supported Formats: The unit is compatible with most common audio and video formats.

Image: Multimedia playback interface with 1080P video support.

5.6 FM/RDS Radio

The built-in FM/RDS radio provides excellent signal reception and allows for automatic memory store and preset scanning.

• Tuning: Use the touchscreen to manually tune to stations or perform an automatic scan.
• Presets: Save your favorite stations to preset slots for quick access.
• RDS Functionality: Radio Data System (RDS) displays station information, song titles, and other data where available.

Image: FM/RDS Radio interface.

5.7 Steering Wheel Control

The unit supports your vehicle's existing steering wheel controls, allowing for convenient operation without taking your hands off the wheel.

• Configuration: Access the steering wheel control settings in the unit's menu to map functions (e.g., volume, track skip, mode) to your vehicle's buttons.
• Benefits: Enhances safety and convenience by providing easy access to common functions.

6. Specifications

7. Troubleshooting

If you encounter issues with your LEXXSON car radio, refer to the following common problems and solutions:

• No Power:
  • Check all power connections and fuses.
  • Ensure the vehicle's battery is properly connected and charged.
• No Sound:
  • Verify speaker wire connections.
  • Check volume levels and mute settings.
  • Ensure the correct audio source is selected.
• GPS Signal Loss:
  • Ensure the GPS antenna has a clear view of the sky and is securely connected.
  • Move the vehicle to an open area away from tall buildings or dense foliage.
• Bluetooth Connection Issues:
  • Ensure Bluetooth is enabled on both the car radio and your mobile device.
  • Delete previous pairings and attempt to re-pair the devices.
  • Restart both the car radio and your mobile device.
• Touchscreen Unresponsive:
  • Perform a soft reset of the unit (refer to specific reset instructions if available, or disconnect/reconnect power).
  • Ensure the screen is clean and free from debris.

If the problem persists, please contact LEXXSON customer support for further assistance.

8. Maintenance

Proper maintenance ensures the longevity and optimal performance of your car radio.

• Cleaning the Screen: Use a soft, lint-free cloth to gently wipe the touchscreen. For stubborn smudges, use a screen cleaner specifically designed for electronic displays. Avoid harsh chemicals or abrasive materials.
• Software Updates: Periodically check for software updates via the unit's settings menu when connected to Wi-Fi. Updates can improve performance and add new features.
• Environmental Conditions: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.

9. Warranty and Support

The LEXXSON Android 10.1 Carplay Car Radio comes with a 1-year warranty from the date of purchase.

This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by improper installation, misuse, accidents, unauthorized repairs, or normal wear and tear.

For warranty claims, technical support, or any questions regarding your product, please contact LEXXSON customer service through the retailer where the product was purchased or visit the official LEXXSON website for contact information.

Contact Information: Please refer to your purchase documentation or the LEXXSON brand store on Amazon for the most current support contact details.