ECONTROLLY S-2016 Replacement Remote Control User Manual

1. Introduction

This manual provides essential information for the setup, operation, and maintenance of your ECONTROLLY S-2016 replacement infrared remote control. This remote is specifically designed to work with Onn Soundbar Speaker System models ONA18SB001 and 100002635.

The S-2016 is a pre-programmed infrared remote control, meaning no complex programming or pairing is required. Simply insert the batteries, and it is ready for use.

Figure 1.1: ECONTROLLY S-2016 Replacement Remote Control. This image displays the front view of the black remote control, showing its various buttons including Power, Volume Up/Down, Mute, AUX, Optical, Bluetooth, and playback controls (Previous, Play/Pause, Next).

2. Setup

2.1 Battery Installation

1. Locate the battery compartment on the back of the remote control.
2. Slide the battery compartment cover downwards or in the direction indicated by an arrow to open it.
3. Insert one (1) AAA battery, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. Slide the battery compartment cover back into place until it clicks securely.

Note: Always use new batteries and dispose of old batteries responsibly. If the remote will not be used for an extended period, remove the batteries to prevent leakage.

3. Operating Instructions

The S-2016 remote control is pre-programmed and ready to operate your compatible Onn Soundbar. Ensure there is a clear line of sight between the remote control and the soundbar's infrared receiver.

3.1 Basic Functions

4. Compatibility

This ECONTROLLY S-2016 replacement remote control is compatible with the following Onn Soundbar Speaker System models:

• ONA18SB001
• 100002635

Please ensure your soundbar model matches one of the listed models for proper functionality.

5. Troubleshooting

5.1 Common Issues and Solutions

• Remote is not responding:
  • Check if the batteries are inserted correctly with the correct polarity (+/-).
  • Replace the batteries with new ones.
  • Ensure there is a clear line of sight between the remote's infrared emitter and the soundbar's receiver. Obstructions can block the signal.
  • Make sure the remote is pointed directly at the soundbar.
• Some buttons are not working:
  • This remote is pre-programmed for the specified Onn Soundbar models. If certain functions are not responding, verify that your soundbar model is listed under the compatibility section.
  • Clean the remote's infrared emitter (the small LED at the front) and the soundbar's receiver with a soft, dry cloth.
• Soundbar is not turning on/off:
  • Ensure the soundbar is plugged into a working power outlet.
  • Try manually turning the soundbar on/off using its physical buttons to confirm it is operational.

6. Specifications

7. Warranty and Support

This product is designed for reliable performance. While specific warranty details are not provided in this manual, ECONTROLLY is committed to customer satisfaction.

If you have any questions, encounter issues, or require further assistance with your ECONTROLLY S-2016 replacement remote control, please do not hesitate to contact the seller or ECONTROLLY customer support. Refer to your purchase documentation for contact information.