Introduction
This manual provides essential information for the installation, operation, and maintenance of your Ejoyous Mechanical Combination Keyless Entry Door Lock. Please read these instructions carefully before installation and use to ensure proper function and security.
Product Features
- High Security: Supports 1 to 11 non-repeating digit password combinations.
- Keyless Convenience: Eliminates the need for physical keys or cards.
- Mechanical Operation: No power supply or batteries required.
- Flexible Code Entry: Password digits can be entered in any order.
- Durable Construction: Made from high-quality zinc alloy with chrome-plated and electroplated finish for resistance against damage.
- Wide Application: Suitable for various door types including sliding doors, kitchen doors, balcony doors, office doors, workshops, interior doors, rental properties, and composite doors.
Image: Keypad illustrating 1-11 digit password capability and out-of-order entry.
Package Contents
Verify that all components are present before beginning installation:
- Front Panel (Keypad side)
- Rear Panel (Interior side with latch mechanism)
- Screw Pack (Various screws for installation)
- Installation Accessories
- 2 x Rubber Pads
- Instruction Manual (Detailed installation guide)
Image: All included components of the lock system.
Product Dimensions
The lock is designed for doors with a thickness of approximately 10-60mm (0.4-2.4 inches). Refer to the diagram below for detailed measurements:
- Height: 141mm (5.55in)
- Width (top): 40mm (1.57in)
- Width (bottom): 60mm (2.36in)
- Keypad side width: 43mm (1.69in)
- Latch depth: 23mm (0.90in)
Image: Detailed product dimensions.
Setup and Installation
Installation requires basic tools and adherence to the detailed instructions provided in the included manual. Ensure your door thickness is within the compatible range of 10-60mm (0.4-2.4 inches).
- Prepare the Door: If replacing an existing lock, remove it. For new installations, mark and drill holes according to the template in the included instruction manual. Ensure precise alignment for proper function.
- Install Latch Mechanism: Insert the latch into the door edge.
- Attach Rubber Pads: Place the rubber pads on the door surface where the front and rear panels will be mounted. These help protect the door and provide a snug fit.
- Mount Front Panel: Position the front panel (keypad side) on the exterior of the door, aligning it with the drilled holes and latch mechanism.
- Mount Rear Panel: Position the rear panel on the interior of the door, connecting it to the front panel and latch. Secure with the provided screws from the screw pack.
- Test Operation: Before closing the door, test the lock's mechanism to ensure smooth operation and correct code entry.
For detailed, step-by-step instructions and diagrams, please refer to the separate instruction manual included in your package.
Image: Examples of the lock installed on different door types.
Operating Instructions
Setting/Changing the Password
The process for setting or changing the password involves internal pins on the lock mechanism. Refer to the specific instructions in your included manual for detailed steps on how to configure your 1-11 digit non-repeating code.
Unlocking the Door
- Enter your programmed password by pressing the corresponding buttons on the keypad. The order of pressing the digits does not matter (e.g., if the code is '123Y', '123Y', '1Y23', 'Y321' will all work).
- Turn the knob to retract the deadbolt.
- Open the door.
Reset Function
If an incorrect password is entered, or if you wish to clear a partial entry, press the 'C' key. This will reset the keypad, allowing you to re-enter the correct password.
Image: Keypad showing the 'C' reset button and confirming no power requirement.
Maintenance
To ensure the longevity and optimal performance of your Ejoyous Mechanical Combination Lock, follow these maintenance guidelines:
- Cleaning: Wipe the lock's exterior with a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the chrome-plated and electroplated finish.
- Lubrication: Periodically apply a small amount of graphite lubricant to the internal moving parts of the latch mechanism to ensure smooth operation. Do not use oil-based lubricants, as they can attract dust and grime.
- Screw Tightness: Periodically check all mounting screws and tighten them if necessary to prevent loosening over time.
- Environmental Protection: While the lock is designed to be durable, extreme weather conditions can affect its performance. Consider additional protection for outdoor installations in harsh environments.
Troubleshooting
If you encounter issues with your lock, refer to the following common problems and solutions:
| Problem | Possible Cause / Solution |
|---|---|
| Lock does not open after entering code. |
|
| Knob feels stiff or difficult to turn. |
|
| Lock feels loose on the door. |
|
| Lock opens without entering the full code (e.g., by wiggling the knob). |
|
| Difficulty in setting or changing the code. | Refer to the detailed instructions in the included manual for the specific code-setting procedure. Ensure all steps are followed precisely. |
Specifications
- Brand: Ejoyous
- Model Number: Ejoyous4u015tkofg135
- Special Feature: Keyless Entry
- Lock Type: Combination Lock, Keypad Deadbolt
- Material: Zinc Alloy
- Recommended Uses: Security for various doors (sliding, kitchen, balcony, office, workshop, interior, rental, composite)
- Door Thickness Compatibility: Approx. 10-60mm (0.4-2.4 inches)
- Controller Type: Mechanical knob, Push Button
- Control Method: Touch
- Style: Modern
- Shape: Rectangular
Warranty and Support
For warranty information or technical support, please refer to the documentation included with your purchase or contact Ejoyous customer service directly. Keep your purchase receipt as proof of purchase.