1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Onforu 100W LED Security Light with Motion Sensor. Please read this manual thoroughly before installation and retain it for future reference.
The Onforu 100W LED Security Light is designed for outdoor use, providing bright illumination with energy efficiency and motion detection capabilities. It features a durable, waterproof design suitable for various weather conditions.
2. Important Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- Ensure the power supply is turned off before attempting any installation or maintenance.
- Installation should be performed by a qualified electrician or a person familiar with the construction and operation of the product and the hazards involved.
- Verify that the supply voltage is correct (AC 100-240V).
- Do not install on surfaces that are unstable or prone to vibration.
- Ensure all connections are secure and properly insulated.
- Do not look directly into the LED light source when it is illuminated, as this may cause eye damage.
- This fixture is rated IP65 for outdoor use, protecting against dust and water jets. However, it should not be submerged in water.
3. Product Overview
The Onforu 100W LED Security Light features three adjustable light heads and an integrated motion sensor. Its robust design ensures reliable performance in outdoor environments.
3.1 Key Features
- High Brightness: 100W LED with 9000 lumens output, equivalent to 500W traditional bulbs.
- Motion Detection: 180° sensing angle, detection range of 16.4 to 32.8 feet.
- Adjustable Design: Three light heads can be adjusted to cover a 270° illumination zone.
- Durable Construction: Die-cast aluminum housing for efficient heat dissipation and extended lifespan.
- Weatherproof: IP65 waterproof rating for protection against rain, sleet, and snow.
- Energy Saving: Reduces electricity consumption significantly compared to traditional lighting.
3.2 Product Components
Refer to the image below for a visual representation of the product components.
Figure 1: Onforu 100W LED Security Light with Motion Sensor. This image displays the front view of the security light, showing its three adjustable LED panels and the motion sensor located beneath the central panel.
Figure 2: Exploded view illustrating the internal components of the LED security light, including the 100W LED lamp beads and high-precision light transmission design.
4. Installation Instructions
Before beginning installation, ensure all necessary tools are available and the power supply is disconnected.
4.1 Recommended Mounting Height and Sensing Area
For optimal performance, install the light at a height of 10 to 16.4 feet (3 to 5 meters) from the ground. The motion sensor has a 180° sensing angle and can detect motion up to 16.4 to 32.8 feet (5 to 10 meters) away.
Figure 3: Diagram showing the versatile motion detection capabilities, recommended mounting height (10-16 ft), and sensing distance (16.4-32.8 ft) for the security light.
Video 1: This video demonstrates the motion detection capabilities of the Onforu 100W LED Security Light, showing how it illuminates an area when a car or person approaches, and then turns off after a set time. It also highlights the wide illumination angle and range.
4.2 Wiring Diagram
The fixture requires a standard AC power connection. Follow the wiring color codes:
- Black Wire: Live Wire (L)
- Green Wire: Ground Wire (G)
- White Wire: Neutral Wire (N)
Figure 4: Detailed diagram showing the wiring connections (Live, Ground, Neutral) and overall dimensions of the security light.
4.3 Mounting Steps
- Prepare the Mounting Surface: Ensure the mounting surface is sturdy and can support the weight of the fixture.
- Attach Mounting Plate: Secure the mounting plate to the wall or soffit using appropriate screws and anchors.
- Connect Wiring: Carefully connect the Live, Ground, and Neutral wires from your power supply to the corresponding wires on the fixture. Use wire nuts to secure connections.
- Mount the Fixture: Attach the light fixture to the mounting plate and secure it with the provided screw.
- Adjust Light Heads: Loosen the adjustment screws on the light heads and motion sensor to position them as desired. Tighten screws once adjusted. The light heads can be adjusted up to 270 degrees.
Figure 5: Exploded view illustrating the easy installation process, showing the mounting plate, wiring connections, and how the fixture attaches.
Figure 6: Image demonstrating the adjustable light heads, allowing for a 270-degree detection zone and flexible illumination angles.
5. Operating Instructions
The motion sensor has three adjustable settings to customize its operation:
Figure 7: Close-up of the motion sensor with three adjustment knobs labeled DISTANCE, LUX, and TIME.
- DISTANCE (Sensitivity): Adjusts the detection range of the motion sensor from 16.4 feet (Min) to 32.8 feet (Max). Turn the knob clockwise to increase sensitivity, counter-clockwise to decrease.
- TIME (Delay Time): Sets how long the light remains on after motion is detected and no further motion is sensed. Adjustable from 10 seconds (Min) to 7 minutes (Max). Turn clockwise for longer duration.
- LUX (Ambient Light Sensor): Determines the ambient light level at which the motion sensor will activate the light.
- Day Mode (Sun icon): Motion detection works during both day and night.
- Night Mode (Moon icon): Motion detection works only at night or in low-light conditions.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your security light.
- Cleaning: Periodically clean the light fixture and motion sensor lens with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Inspection: Regularly check for any loose wiring, damaged components, or signs of wear. Ensure the mounting is secure.
- LEDs: The LED light source is integrated and not user-replaceable.
Figure 8: Image illustrating the IP65 waterproof rating of the security light, showing its resilience in rain, snow, and sunny conditions.
7. Troubleshooting
If you encounter issues with your Onforu LED Security Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light stays on continuously. |
|
|
| Light flashes or flickers. |
|
|
| Motion sensor not detecting. |
|
|
8. Product Specifications
| Feature | Detail |
|---|---|
| Brand | Onforu |
| Model Name | Motion Sensor Outdoor Light (BDD100G-3) |
| Wattage | 100 watts |
| Brightness | 9000 Lumens |
| Color Temperature | 6000 Kelvin (Cool White) |
| Light Source Type | LED |
| Material | Die-cast Aluminum, Metal |
| Water Resistance Level | IP65 Waterproof |
| Motion Sensor Angle | 180° |
| Motion Sensor Distance | 16.4 feet ~ 32.8 feet |
| Delay Time Adjustment | 10 seconds ~ 7 minutes |
| Product Dimensions | 10"L x 7"W x 6"H |
| Item Weight | 3.05 pounds |
| Installation Type | Wall Mount |
| Indoor/Outdoor Usage | Outdoor |
9. Warranty and Support
The Onforu 100W LED Security Light (Model BDD100G-3) comes with a 2-year warranty from the date of purchase.
For technical support, warranty claims, or any questions regarding your product, please contact Onforu customer service. Refer to the official Onforu website for the most current contact information.
Online Support: Visit the Onforu Store on Amazon for product information and support resources.
