HAIBOXING 16890A

Download PDF
Contents

HAIBOXING Brushless RC Car 16890A User Manual

Model: 16890A

Introduction

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your HAIBOXING Brushless RC Car 16890A. Please read this manual thoroughly before operating the vehicle to ensure proper function and longevity.

The HAIBOXING 16890A is a 1/16 scale 4X4 remote control truck featuring a brushless motor for high-speed performance and all-terrain capability. It is designed for users aged 8 years and up.

HAIBOXING 16890A RC Car with remote, batteries, and spare paddle tires

Image: The HAIBOXING 16890A RC car, its remote control, two Li-Po batteries, two USB charging cables, and a set of spare paddle tires.

Package Contents

Verify that all items are present in the package:

  • HAIBOXING 16890A RC Car (1)
  • 2.4GHz Transmitter (1)
  • 7.4V 1200mAh Li-Po Batteries (2)
  • USB Charging Cables (2)
  • Paddle Tires (4)
  • Wheelie Bar (1)
  • Screwdriver (1)
  • Small Cross Wrench (1)
  • Wheel Hex. Pins (6)
  • M4 Lock Nuts (3)
  • Body Clips (4)
  • Instruction Manual (1)
  • Body Decals (1 sheet)
Diagram showing all included accessory parts for the RC car

Image: A visual representation of the HAIBOXING 16890A RC car and all its included accessories, such as the remote, batteries, charging cables, and spare parts.

Setup

Battery Installation and Charging

  1. Vehicle Battery: The vehicle is equipped with two 7.4V 1200mAh Li-Po batteries. Ensure the battery is fully charged before first use. Connect the battery to the USB charging cable and plug the cable into a compatible USB power source. The charging indicator will show charging status.
  2. Transmitter Batteries: The 2.4GHz transmitter requires AA batteries (not included). Open the battery compartment on the transmitter, insert the batteries according to the polarity markings, and close the compartment.

Important Battery Information:

  • Always fully charge the vehicle battery before every use.
  • Do not leave batteries idle for a long period. Charge batteries frequently before storing them to protect them from over-discharging.
  • Using this ESC with a 3S or higher battery is not recommended.
  • Avoid seawater invasion with the electronic speed controller (ESC).
HAIBOXING 16890A RC car with speedometers showing 48+ KM/H and text 'Go Brushless, Go Anywhere! 2S Li-Po Batteries, Speeds Unleashed.'

Image: The HAIBOXING 16890A RC car in motion, illustrating its speed capabilities and the power of its 2S Li-Po batteries.

Binding the Transmitter and Vehicle

Refer to the specific instructions in the included manual for the binding procedure. Generally, ensure both the vehicle and transmitter are powered off, then power on the vehicle, followed by the transmitter, and follow the binding sequence.

Tire Selection

The vehicle comes with high-grip knobby tread tires and optional paddle tires. Select the appropriate tires for your driving surface:

  • Knobby Tread Tires: Suitable for gravel roads, grass, concrete, and general off-road conditions.
  • Paddle Tires: Recommended for sand land or loose terrain to improve traction.
Image showing two types of tires: knobby tread for various terrains and paddle tires for sand/snow

Image: Comparison of the standard knobby tread tires and the optional paddle tires, indicating their suitability for different terrains like dirt, grass, gravel, sand, and snow.

Wheelie Bar Installation (Optional)

The included wheelie bar can be installed for stunt performance or to improve driving balance, especially during high-speed acceleration. Attach it to the rear of the vehicle as per the diagram in the main instruction manual.

Close-up of the rear of the RC car showing the optional wheelie bar installed

Image: A detailed view of the rear of the RC car, highlighting the wheelie bar and its position for improved traction and stunt capabilities.

Operating Instructions

Driving the Vehicle

  • Power On: Ensure the vehicle battery is charged and installed. Turn on the vehicle's power switch, then the transmitter.
  • Steering: Use the steering wheel on the transmitter to control the direction of the vehicle (left/right).
  • Throttle: Use the trigger on the transmitter to control forward and reverse movement. Pull the trigger for forward motion, push it for reverse.
  • Speed Control: The 2.4GHz radio system offers throttle range control, allowing adjustment for different turns and tracks.
HAIBOXING 16890A RC car driving on a dirt track with a graphic of a brushless motor

Image: The HAIBOXING 16890A RC car in action on a dirt surface, emphasizing its brushless power system for superior efficiency and high speed.

Performance Features

  • Brushless Motor: The 2840 brushless 3500KV motor enables top speeds of over 48 KM/H (30 mph).
  • 4X4 Drive Train: Full metal drive train with reinforced steel gears and pinions ensures durability and efficient power transfer.
  • Suspension: Aluminum oil-filled shocks absorb bumps and reduce vibrations, enhancing maneuverability and stability across various terrains.
  • Waterproof Electronics: The 35A splash waterproof electronic speed controller (ESC) allows operation in wet conditions, such as muddy puddles.
  • Steering: A 3-wire independent 2.5KG digital servo provides precise steering performance.
HAIBOXING 16890A RC car on sand, highlighting features like 2.4GHz, splash waterproof electronics, ball bearings, metal diff gears, and oil-filled shocks

Image: The HAIBOXING 16890A RC car positioned on sand, with icons illustrating its key features: 2.4GHz radio system, splash waterproof electronics, ball bearings, metal differential gears, and oil-filled shocks.

Diagram comparing aluminum oil shocks with non-aluminum counterparts, highlighting aggressive performance

Image: A visual comparison demonstrating the enhanced performance provided by aluminum oil shocks compared to standard non-aluminum shocks.

Maintenance

  • Cleaning: After each use, especially in dusty or wet conditions, clean the vehicle to remove dirt and debris. Use a soft brush or compressed air. Avoid using water directly on electronic components unless specified as waterproof.
  • Lubrication: Periodically check and lubricate moving parts such as universal joints and bearings to ensure smooth operation and prevent wear.
  • Inspections: Regularly inspect the vehicle for any loose screws, damaged parts, or worn tires. Replace any damaged components promptly.
  • Battery Care: Store Li-Po batteries in a cool, dry place. Do not overcharge or over-discharge. If storing for extended periods, charge them to a storage voltage (typically around 3.8V per cell).
  • Chassis: The chassis design incorporates integrated bulkheads. While durable, avoid excessive force that could damage the chassis structure.
Exploded view diagram of the HAIBOXING 16890A RC car chassis and drivetrain components

Image: A detailed exploded view of the HAIBOXING 16890A's chassis, illustrating the internal components including the motor, battery, shocks, and drive train, emphasizing its upgraded metal parts and ball bearings.

Troubleshooting

This section addresses common issues you might encounter. For problems not listed, please contact customer support.

Troubleshooting guide part 1 for RC car issues like binding, steering, and straight running

Image: Troubleshooting guide part 1, covering issues such as inability to bind with the transmitter, steering working but no forward/backward movement, inability to run straight, and wheels not turning or steering.

Troubleshooting guide part 2 for RC car issues like vehicle running itself, power switching off, and batteries not charging

Image: Troubleshooting guide part 2, addressing problems like the vehicle running itself when powered on, automatic power shut-off, inability to reverse or go forward, and batteries not taking charge.

Specifications

Product Dimensions12 x 8.6 x 4.5 inches
Item Weight1.92 pounds
Model Number16890A
Scale1/16
Motor TypeBrushless (2840, 3500KV)
Top Speed48+ KM/H (30+ mph)
Drive System4X4 (Four-Wheel Drive)
Batteries2 x 7.4V 1200mAh Li-Po (included)
ESC35A Splash Waterproof Electronic Speed Controller
Recommended Age8 years and up
Diagram showing the dimensions of the HAIBOXING 16890A RC car: 12.0 inches length, 8.6 inches width, 4.5 inches height

Image: A diagram illustrating the key dimensions of the HAIBOXING 16890A RC car, including its length, width, and height.

Warranty and Support

HAIBOXING provides reliable technical support for its products. For any issues, questions, or assistance with spare parts, please contact the manufacturer directly. Information regarding specific warranty terms can typically be found on the product packaging or the manufacturer's official website.

Spare parts for this fast RC truck are available on Amazon for convenient replacement.

© 2025 HAIBOXING. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.