1. Product Overview
This manual provides instructions for the assembly, operation, and maintenance of your vidaXL Double Sun Lounger with Canopy. This outdoor daybed is designed for relaxation, featuring a durable steel frame, comfortable textilene fabric, and an adjustable canopy for sun protection. It includes two small pillows for enhanced comfort.
Figure 1.1: Fully assembled vidaXL Double Sun Lounger with Canopy.
2. Safety Information
- Read all instructions carefully before assembly and use.
- Ensure all components are securely fastened before use.
- Do not exceed the maximum weight capacity (consult product packaging or manufacturer for specific limits).
- Keep children and pets away from the assembly area.
- This product is intended for outdoor use. Avoid using it in extreme weather conditions.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
3. Package Contents
Please check that all parts are present before beginning assembly. If any parts are missing or damaged, contact customer support.
- Main Steel Frame Components (various pieces)
- Textilene Fabric Seating/Backrest
- Canopy Frame and Fabric
- 2 x Small Pillows
- Assembly Hardware (screws, bolts, washers, nuts)
- Assembly Tool (e.g., Allen wrench)
4. Setup and Assembly Instructions
Assembly typically requires two adults. Lay out all components on a soft, clean surface to prevent scratches.
- Assemble the Base Frame: Connect the main curved steel frame pieces using the provided hardware. Ensure all connections are finger-tight at this stage.
- Attach the Seating Fabric: Carefully slide the textilene fabric onto the designated frame sections. Ensure it is taut and evenly distributed.
- Install the Backrest Frame: Secure the backrest frame to the main base frame.
- Mount the Canopy Frame: Attach the canopy support bars to the upper part of the backrest frame.
- Secure the Canopy Fabric: Drape and secure the canopy fabric over its frame, ensuring it is properly aligned and fastened.
- Tighten All Hardware: Once all components are in place, fully tighten all screws and bolts using the provided tool. Do not overtighten.
- Attach Pillows: Place the two small pillows onto the lounger for added comfort.
Figure 4.1: Overview of the sun lounger with key dimensions for assembly planning.
Figure 4.2: Rear view of the lounger, showing frame connections.
5. Operating Instructions
- Using the Lounger: The lounger is designed for comfortable outdoor relaxation. Sit or recline gently onto the textilene fabric.
- Adjusting the Canopy: The canopy provides shade and UV protection. It can be adjusted to different angles by gently pushing or pulling it to your desired position.
- Pillows: The included small pillows can be positioned for head or neck support as desired.
Figure 5.1: Side view demonstrating the reclined position of the lounger.
Figure 5.2: Detail of the canopy attachment mechanism.
6. Maintenance
- Cleaning: The textilene fabric is easy to clean. Wipe down with a damp cloth and mild soap. Rinse thoroughly and allow to air dry completely before storage.
- Frame Care: Clean the steel frame with a damp cloth. Avoid abrasive cleaners.
- Storage: To prolong the life of your sun lounger, store it indoors or under a waterproof cover when not in use, especially during inclement weather or off-season.
- Inspection: Periodically check all bolts and screws to ensure they remain tight. Retighten as necessary.
Figure 6.1: Detail of the durable and easy-to-clean textilene fabric.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lounger feels unstable. | Loose hardware. Uneven surface. | Check and tighten all bolts and screws. Move the lounger to a flat, stable surface. |
| Canopy does not stay in position. | Canopy mechanism not fully engaged or damaged. | Ensure the canopy is pushed firmly into its desired position. Inspect the mechanism for any damage. |
| Fabric appears dirty or stained. | Normal outdoor exposure. | Clean with a damp cloth and mild soap as per maintenance instructions. |
8. Specifications
- Model Number: 310547
- ASIN: B0BFFC1WTB
- Item Weight: 63.4 pounds (approx. 28.76 kg)
- Material: Steel frame, Textilene fabric
- Color: Black (fabric), Cream (canopy)
- Dimensions (Approximate, L x W x H):
- Overall Length: 180 cm (70.9 inches)
- Overall Width: 139 cm (54.7 inches)
- Overall Height (with canopy): 170 cm (66.9 inches)
- Date First Available: November 22, 2021
9. Warranty and Support
For any questions regarding assembly, missing parts, or product performance, please contact vidaXL customer support. Refer to your purchase documentation for specific warranty details.
This product is eligible for 30-day easy returns through the retailer.
You can visit the vidaXL store for more information: vidaXL Store
