Introduction
Welcome to the user manual for your Havit TW967 Wireless Headphones. This guide provides detailed instructions on how to set up, operate, maintain, and troubleshoot your new headphones to ensure optimal performance and longevity.
Package Contents:
- Havit TW967 Wireless Earbuds (Left and Right)
- Charging Case
- USB Type-C Charging Cable
- Eartips (various sizes)
- User Manual

Image: Havit TW967 Wireless Headphones, showing both earbuds and the charging case.
Setup
1. Charging the Earbuds and Case
Before first use, fully charge the charging case and earbuds. The charging case has an indicator light to show its power status.
- Place the earbuds into the charging case. Ensure they are correctly seated.
- Connect the USB Type-C charging cable to the charging port on the case and plug the other end into a compatible USB power source (DC 5V/1A).
- The indicator lights on the case will show the charging status. A full charge typically takes about 2 hours for the case and 1-2 hours for the earbuds.

Image: Illustration of the compact charging case and its battery life, highlighting Bluetooth 5.1 connectivity.
2. Pairing with Your Device
The Havit TW967 headphones feature intelligent automatic pairing for convenience.
- Ensure the earbuds are charged and placed inside the charging case.
- Open the charging case. The earbuds will automatically power on and enter pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "Havit TW967" from the list of found devices.
- Once connected, the earbuds will indicate successful pairing (e.g., a voice prompt or LED change).
- After the initial pairing, the earbuds will automatically connect to the last paired device when removed from the case.
Operating Instructions
1. Wearing the Earbuds
For optimal sound quality and comfort, ensure the earbuds are properly fitted in your ears. Choose the eartip size that provides a secure and comfortable seal.
- Gently insert each earbud into its corresponding ear canal (L for left, R for right).
- Rotate the earbud slightly until it feels secure and comfortable. The ergonomic design is intended to fit the curve of the ear canal.

Image: A person wearing the earbuds, demonstrating the ergonomic in-ear comfort design.
2. Touch Controls
The Havit TW967 earbuds feature intuitive touch controls for easy management of music and calls.
| Action | Function |
|---|---|
| Single Tap (Left/Right Earbud) | Play/Pause Music, Answer/End Call |
| Double Tap (Right Earbud) | Next Song |
| Double Tap (Left Earbud) | Previous Song |
| Triple Tap (Right Earbud) | Volume Up |
| Triple Tap (Left Earbud) | Volume Down |
| Long Press (2 seconds) | Reject Call, Activate Voice Assistant |

Image: Visual representation of the touch control area on the earbuds and their functions.
3. Switching Modes (Bilateral/Unilateral)
The Havit TW967 supports both bilateral (stereo) and unilateral (mono) modes, allowing you to use both earbuds or just one.
- Bilateral Mode: Both earbuds are used together for stereo sound. This is the default mode when both earbuds are removed from the case.
- Unilateral Mode: You can use either the left or right earbud independently. Simply take one earbud out of the case, and it will automatically connect to your device. The other earbud can remain in the case or be used later.

Image: Diagram illustrating the master-slave switch functionality, showing how audio can be enjoyed in bilateral or single-earbud mode.
Maintenance
1. Cleaning
Regular cleaning helps maintain sound quality and hygiene.
- Use a soft, dry, lint-free cloth to wipe the earbuds and charging case.
- For earwax or debris in the eartips or speaker mesh, use a small, soft brush or cotton swab lightly dampened with rubbing alcohol. Ensure no liquid enters the speaker openings.
- Do not use abrasive cleaners or immerse the earbuds or case in water.
2. Storage
When not in use, store the earbuds in their charging case to protect them from dust, damage, and to keep them charged.
- Store in a cool, dry place, away from extreme temperatures and direct sunlight.
- Avoid storing in humid environments.
3. Battery Care
To prolong battery life:
- Avoid fully discharging the battery frequently.
- Charge the case and earbuds regularly, even if not used for extended periods.
- Use the provided charging cable and a compatible power adapter.
Troubleshooting
If you encounter issues with your Havit TW967 headphones, refer to the following common problems and solutions:
- Earbuds not pairing with device:
- Ensure earbuds are charged.
- Turn off Bluetooth on your device and turn it back on.
- Forget "Havit TW967" from your device's Bluetooth list and try pairing again.
- Place earbuds back in the case, close the lid, wait a few seconds, then open to re-initiate pairing mode.
- Only one earbud working:
- Ensure both earbuds are charged.
- Place both earbuds back into the charging case, close the lid, and then open it again to allow them to re-sync.
- Check if you are in unilateral mode. If so, take out the other earbud.
- No sound or low volume:
- Increase the volume on both your device and the earbuds using touch controls.
- Ensure earbuds are properly connected to your device.
- Clean the speaker mesh and eartips to remove any obstructions.
- Charging case not charging:
- Check the charging cable and power adapter for damage.
- Try a different USB port or power source.
- Ensure the Type-C cable is fully inserted into the charging port.
Specifications
Detailed technical specifications for the Havit TW967 Wireless Headphones:
| Feature | Detail |
|---|---|
| Chipset | JL 6973D4 |
| Bluetooth Version | V5.1 |
| Earbud Battery Capacity | 40mAh*2 |
| Charging Case Battery Capacity | 300mAh |
| Play Time (60% volume) | 5 Hours |
| Talk Time | 4 Hours |
| Charging Time (Earbuds) | 1-2 Hours |
| Charging Time (Case) | About 2 Hours |
| Charging Port | Type-C |
| Wireless Working Range | 10M (without obstacles) |
| Speaker Size | Φ10mm*2 |
| Speaker Sensitivity | 108±3 dB 1kHz/1mW |
| Impedance | 32±15% 1kHz |
| Speaker Frequency | 20Hz~20KHz |
| Supported Profiles | HFP, HSP, A2DP, AVRCP AAC |
| Input Voltage / Current | DC 5V/1A |
| Earbud Dimensions | 31.6*21.34*23.62mm*2 |
| Net Weight (Earbuds) | 3.8*2g |
| Net Weight (Charging Case) | 36.5g |

Image: Visual summary of Havit TW967 product specifications and dimensions.
Warranty and Support
Havit products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty from the date of purchase.
- Please retain your proof of purchase for warranty claims.
- The warranty does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear.
For further assistance, technical support, or warranty inquiries, please contact Havit customer service through the official website or your local distributor.
Note: Specific warranty terms may vary by region. Please refer to the warranty card included with your product or visit the official Havit website for detailed information.