Introduction
This user manual provides comprehensive instructions for the safe and effective operation, maintenance, and care of your YABIFE Dog Nail Trimmers and Clippers Kit. This kit is designed for grooming the nails of small, medium, and large dogs, as well as cats, offering both traditional clipping and electric grinding functionalities.
Product Features
- Dual Grooming Tools: Includes both a professional dog nail clipper and an electric nail grinder for versatile grooming options.
- Whisper Quiet Operation: The electric grinder operates at less than 30dB, minimizing noise to prevent pet anxiety during grooming.
- Multiple Speed Settings: Features 3 rotation speed settings (7200 to 10000 r/s) to accommodate various nail hardness levels.
- Three Grinding Ports: Equipped with 3 different sized ports suitable for small, medium, and large pet nails.
- LED Lighting: Two integrated LED bulbs illuminate the nail area, aiding in locating the quick and preventing over-grinding.
- Power Percentage Display: An LED display shows remaining battery power, indicating when recharging is necessary.
- Type-C USB Charging: Utilizes a universal Type-C USB charging port for convenient and fast charging.
- Long Battery Life: The large capacity battery provides up to 12 hours of operation on a single charge.
Included Components
The YABIFE Dog Nail Trimmers and Clippers Kit includes the following items:
- 1 x Electric Dog Nail Grinder (Model: NLQ-P007)
- 1 x Dog Nail Clipper
- 1 x USB Type-C Charging Cable
- 2 x Replacement Nail Grinding Heads (one medium, one for softer nails/finishing)
- 1 x Cleaning Brush

Figure 1: Overview of the YABIFE Dog Nail Trimmers and Clippers Kit components.
Setup and Charging
- Unpack Components: Carefully remove all items from the packaging.
- Inspect Grinder Head: The electric grinder comes with a grinding head pre-installed. Ensure it is securely in place.
- Remove Safety Cap: The grinder features a locking safety cap. To remove, twist and pull off the cap. There is also a second safety mechanism that unscrews and pops off, preventing accidental activation.
- Charge the Grinder:
- Locate the Type-C USB charging port at the bottom of the grinder.
- Connect the provided Type-C USB charging cable to the grinder and to a compatible USB power source (e.g., wall adapter, computer USB port).
- The power percentage display will indicate charging status. A full charge provides up to 12 hours of use.

Figure 2: Charging the YABIFE Electric Nail Grinder via Type-C USB.
Operating Instructions
Proper technique is crucial for safe and effective nail grooming. Always prioritize your pet's comfort and safety.
Familiarization and Preparation:
- Before first use, allow your pet to become accustomed to the grinder's sound and vibration. Turn the grinder on and let your pet sniff and investigate it without immediate use on their nails.
- Offer treats and praise to create a positive association with the grooming tool.
- Ensure your pet is calm and comfortable before beginning the grooming process.
Using the Nail Clipper:
For excessively long nails, it may be beneficial to use the nail clipper first to remove the bulk of the nail before refining with the grinder.
- The clipper features a safety guard to reduce the risk of cutting nails too short.
- A lock button helps secure the handle in a safe, closed position when not in use.
- Carefully trim only the tip of the nail, avoiding the quick (the pink part of the nail containing blood vessels and nerves).

Figure 3: Using the nail clipper with safety guard.
Using the Electric Nail Grinder:
- Turn On: Press and hold the paw-shaped power button for approximately 2 seconds to turn on the grinder.
- Select Speed: The grinder has 3 speed settings. Press the power button repeatedly to cycle through low (L), medium (M), and high (H) speeds. Start with the lowest speed, especially for new users or sensitive pets.
- Choose Grinding Port: The grinder head has three ports of varying sizes. Select the port that best fits your pet's nail size (small, medium, or large).

Figure 4: Three grinding ports for different pet sizes.
- Activate LED Light: Press the light button at the bottom of the grinder to turn on the dual LED lights. These lights help illuminate the nail, making it easier to see the quick and prevent over-grinding.

Figure 5: Grinder with dual LED lights for improved visibility.
- Grind Nails: Gently place your pet's nail into the chosen grinding port. Hold the grinder at a 45-degree angle to the nail tip. Grind for only a few seconds at a time, then check the nail and the quick. Repeat as necessary for each nail.

Figure 6: Step-by-step guide for professional nail grinding.
- Reward Your Pet: Throughout the grooming session, and especially upon completion, reward your pet with treats and praise to reinforce positive behavior. This helps them associate nail grooming with a positive experience.
Video Demonstration:
Video 1: A demonstration of using the YABIFE nail grinder on a dog, highlighting its quiet operation and ease of use. This video provides a visual guide to the grooming process.
Maintenance
- Cleaning the Grinder: After each use, remove the safety cap and use the provided cleaning brush to remove any nail dust or debris from the grinding head and surrounding area. This ensures optimal performance and longevity.
- Replacing Grinding Heads: The kit includes additional grinding heads. If the current grinding head becomes worn or less effective, replace it by carefully unscrewing the old head and screwing on a new one.
- Storage: Store the kit in a dry, safe place away from direct sunlight and out of reach of children and pets. Ensure the clipper is locked and the grinder has its safety cap on.
Troubleshooting
If you encounter any issues with your YABIFE Dog Nail Trimmers and Clippers Kit, consider the following:
- Grinder not turning on: Ensure the device is fully charged. Check the power button is pressed and held for the required duration.
- Grinder not effective: The grinding head may be worn and require replacement. Ensure you are using the appropriate speed setting for your pet's nail hardness.
- Pet discomfort: Re-familiarize your pet with the device. Start with the lowest speed and shortest grinding sessions. Use positive reinforcement (treats, praise). Ensure you are not grinding too close to the quick.
For persistent issues, please refer to the warranty and support information.
Specifications
| Item Weight | 11.3 ounces (320 Grams) |
| Manufacturer | Yabife |
| Item Model Number | NLQ-P007 |
| Batteries | 1 AAA batteries required (included) |
| Item Package Dimensions L x W x H | 7.05 x 3.62 x 2.32 inches |
| Item Dimensions LxWxH | 7.09 x 3.54 x 2.32 inches |
| Color | AB-blue scissor |
| Target Audience | House-cats, Dogs (All Life Stages) |
Warranty and Support
The YABIFE Dog Nail Trimmers and Clippers Kit comes with a 2-Year Warranty.
For further assistance, product support, or warranty claims, please visit the official YABIFE Store or refer to the comprehensive Instructions for Use (IFU) PDF document available online.
- Official YABIFE Store: Visit Store
- Instructions for Use (IFU) (PDF): Download PDF
