BETAFPV Cetus X 2S Brushless Drone Instruction Manual

Introduction

The BETAFPV Cetus X 2S Brushless Drone is a high-performance FPV quadcopter designed for both indoor and outdoor flight. It features an ELRS V3 firmware, C04 FPV Camera, M04 25-400mW VTX, and an F4 1S 12A FC V2.2 flight controller. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting of your drone.

The Cetus X frame is constructed from durable PA12 material, offering excellent impact resistance and 360° protection for safe flights. The FPV camera supports an adjustable angle from 0° to 40°, providing versatile viewing options during flight.

Safety Guidelines

Practice Flying: For beginners, it is highly recommended to practice flying drones via a simulator or Betaflight configurator to prevent damage from frequent crashes during initial flights.
Firmware Compatibility: Ensure all connected devices (transmitter, TX module, etc.) use the same ELRS V3 protocol and firmware version for successful binding.
ESC/Motor Settings: DO NOT change the ESC or Motor settings on the Betaflight configurator, BLHeli Configurator, or Bluejay Configurator. Doing so will invalidate the Flight Controller.
Battery Usage: The Cetus X Brushless Quadcopter requires two 1S batteries. It is not recommended to use different brand batteries.
Camera Angle: The C04 FPV Camera supports an adjustable angle from 0° to 40°. Do not adjust the angle to exceed 40°, as this may damage the camera and cause signal loss.

Package Contents

The following items are included in your Cetus X Brushless Quadcopter package:

1 * Cetus X Brushless Quadcopter
1 * BT2.0 Battery Charger and Voltage Tester
2 * BT2.0 450mAh 1S 30C Battery
1 * Phillips Screwdriver
1 * Prop Removal Tool
1 * Type-C Adapter
4 * Gemfan 2020 4-Blades Props

All components included in the BETAFPV Cetus X package — **Figure 1:** All components included in the Cetus X package, neatly arranged next to the drone and its box.

Specifications

Item	Cetus X Brushless Quadcopter
Weight	55g (1.94 ounces)
Wheelbase	95mm
Flight Controller (FC)	F4 1S 12A FC V2.2 (ELRS 2.4G)
Motors	1103 11000KV Motor
Propellers	Gemfan 2020 4-Blades Props
Camera	C04 FPV Camera (480p Video Capture Resolution)
Camera Adjustable Angle	0°-40°
Receiver Protocol	ELRS 2.4G
Video Transmitter (VTX)	M04 25-400mW VTX
Battery	2*BT2.0 450mAh 1S 30C Battery (Lithium Polymer)
Flight Time	5 mins
Material	Nylon (PA12)
Product Dimensions	6.8"L x 5.7"W x 2.3"H

BETAFPV Cetus X drone on a digital scale showing 54.4g — **Figure 2:** The Cetus X drone on a digital scale, indicating its lightweight design at approximately 55 grams.

Setup

Battery Installation

Proper battery installation is crucial for safe operation. The Cetus X uses two 1S BT2.0 450mAh batteries.

Two BT2.0 450mAh 1S batteries connected to the Cetus X drone — **Figure 3:** Two 1S BT2.0 450mAh batteries connected to the Cetus X drone, secured with a strap.

Video 1: This video provides user tips for the Aquila16 Brushless Drone, including guidance on battery installation which is similar for Cetus X models.

Binding the Drone

To establish communication between your drone and transmitter, you must bind them. Ensure both devices use the ELRS 2.4G protocol and are on the same firmware version (ELRS V3).

Video 2: This video demonstrates the binding process for BETAFPV quads and radios, applicable to Betaflight versions of Cetus X.

Operating Instructions

Camera Angle Adjustment

The C04 FPV Camera's angle can be adjusted from 0° to 40°. At 0°, the frame and propellers may be visible in your FPV feed. Adjusting the angle to approximately 25° typically makes the frame and props invisible during flight, providing a clearer view.

Diagram showing the adjustable camera angle of the Cetus X drone from 0 to 40 degrees — **Figure 4:** Diagram illustrating the adjustable camera angle of the Cetus X drone, ranging from 0° to 40°.

Flight Environment

The Cetus X is suitable for both indoor and outdoor flight. For outdoor flying, choose calm conditions with little to no wind to ensure stable flight performance due to its lightweight design.

Activating Turtle Mode

Turtle Mode allows the drone to flip itself over if it lands upside down, enabling you to resume flight without manual intervention.

Video 3: This video provides instructions on how to activate Turtle Mode on BETAFPV drones, applicable to Betaflight versions of Cetus X.

Maintenance

Camera Replacement

If your C04 FPV Camera needs replacement, follow the steps outlined in the video below. The camera is designed for plug-and-play installation.

**Figure 5:** Close-up view of the C04 FPV Camera on the Cetus X drone.

Video 4: This video demonstrates how to replace the camera on a Cetus Pro Drone, which uses a similar camera replacement process for the Cetus X.

Troubleshooting

Fixing Drifting Issues

If your drone experiences drifting during flight, it may require calibration or adjustment within the Betaflight software.

Video 5: This video provides guidance on fixing drifting issues in BETAFPV drones, applicable to Betaflight versions of Cetus X.

Loss of Video Signal

If you experience loss of video signal, ensure the camera angle is within the recommended 0°-40° range. Angles exceeding 40° can cause signal loss. Also, check all connections to the VTX module and camera.

Warranty and Support

For warranty claims, technical support, or any product-related inquiries, please contact BETAFPV customer service directly. Refer to your purchase documentation for specific warranty terms and contact details.

	BETAFPV Cetus X Brushless Quadcopter User Manual This document provides a comprehensive guide to the BETAFPV Cetus X Brushless Quadcopter, covering product contents, preflight checks, binding procedures, VTX frequency and power switching, and Betaflight configuration.
	BETAFPV Cetus Lite FPV Kit User Manual Comprehensive user manual for the BETAFPV Cetus Lite FPV Kit, covering setup, flight operation, FPV goggles, remote control transmitter, advanced settings, and troubleshooting.
	Cetus FPV Drone Quick Start Guide Comprehensive quick start guide for the Betafpv Cetus FPV drone. Learn about different flight modes including Normal, Sport, and Manual, speed settings, and optical flow positioning. Essential information for new pilots.
	BETAFPV Cetus FPV Kit User Manual A comprehensive user manual for the BETAFPV Cetus FPV Kit, covering product details, preflight checks, quick start guide, flight operations, remote control and FPV goggles usage, OSD menu, LED status codes, advanced settings, and FAQs.
	BetaFPV Cetus FPV Kit Quick Start Guide - Flight Modes and Settings Get started quickly with the BetaFPV Cetus FPV Kit. This guide covers essential flight modes (Normal, Sport, Manual), speed control, and optical flow positioning settings, designed for ease of use and optimal FPV learning.
	BETAFPV Cetus FPV Kit Quick Start Guide A quick start guide for the BETAFPV Cetus FPV Kit, detailing Normal Mode, Sport Mode, Manual Mode, Speed Switch, and Optical Flow Positioning.

BETAFPV Cetus X