Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Nathan James Kensi Nightstand. Please read all instructions carefully before beginning assembly and retain this manual for future reference. The Kensi Nightstand features a sleek white finish, a natural wood finish drawer with a herringbone design, and gold-colored metal legs, offering both storage and display space.
Image: Two Kensi Nightstands, showcasing their design and functionality in a bedroom environment.
Safety Information
- Always assemble the product on a soft, clean surface like the packaging carton to prevent scratches.
- Ensure all parts are securely fastened before use. Periodically check and tighten all connections.
- Do not exceed the recommended weight limits: 90 lbs for the top shelf and 11 lbs for the drawer.
- Keep small parts away from children during assembly.
- This product is intended for residential use only.
Package Contents
Verify that all components are present before beginning assembly. Refer to the included assembly guide for a detailed parts list.
- Main body panels (top, bottom, sides, back)
- Drawer components (front, back, sides, bottom)
- Drawer slides
- Metal leg frames
- Hardware pack (screws, dowels, cam locks, handle)
Tools Required
- Phillips head screwdriver (not included)
- Packaging carton (as a working surface)
Assembly Instructions
Assembly typically takes approximately 60 minutes. Follow the steps below in conjunction with the detailed assembly guide provided in your package.
- Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a soft, clean surface. Identify each part using the labels and the assembly guide.
- Assemble the Main Frame: Connect the side panels to the top and bottom panels using the provided hardware (e.g., dowels, cam locks). Ensure all connections are snug.
- Install Drawer Slides: Attach the drawer slides to the interior side panels of the main frame according to the instructions.
- Assemble the Drawer: Construct the drawer box by connecting the drawer sides, front, and back. Insert the drawer bottom. Attach the herringbone-patterned drawer front and the handle.
- Insert Drawer: Carefully slide the assembled drawer into the installed drawer slides on the main frame.
- Attach Metal Legs: Secure the gold-colored metal leg frames to the bottom of the nightstand using the designated screws. Ensure the footpads are facing down to protect your floors.
- Final Check: Verify that all screws and connections are tight and the nightstand is stable.
Image: Diagram highlighting key features of the Kensi Nightstand's frame and design details.
Image: Detailed view of the drawer, illustrating its construction and handle.
Operating Instructions
The Kensi Nightstand is designed for convenient storage and display.
- Drawer Use: The top drawer provides concealed storage. Pull the handle gently to open and push to close. Avoid forcing the drawer.
- Open Shelf: The lower open cubby is suitable for displaying books, decorative items, or for easy access to frequently used items.
- Top Surface: The top surface can hold lamps, alarm clocks, or other personal items, adhering to the 90 lbs weight limit.
Image: Kensi Nightstand positioned beside a bed, demonstrating its use as a bedside table.
Maintenance
- Cleaning: Wipe the nightstand with a dry cloth to remove dust and dirt. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
- Spills: Clean spills immediately with a dry or slightly damp cloth to prevent staining.
- Hardware: Periodically check all screws and fittings to ensure they remain tight. Tighten as necessary to maintain stability.
Troubleshooting
- Wobbly Nightstand: Ensure all leg attachments and frame connections are fully tightened. Adjust the footpads if present, to level the unit on uneven floors.
- Drawer Not Sliding Smoothly: Check that the drawer slides are correctly installed and aligned. Ensure no obstructions are in the drawer tracks. If the drawer is misaligned, loosen the screws on the drawer slides, adjust the position, and re-tighten.
- Loose Handle: Tighten the screws securing the drawer handle from the inside of the drawer.
Specifications
| Feature | Detail |
|---|---|
| Brand | Nathan James |
| Model Name | Kensi Nightstand |
| Model Number | 33801-2 |
| Product Dimensions (D x W x H) | 17"D x 19"W x 22"H |
| Item Weight | 27 Pounds |
| Maximum Weight Recommendation (Top Shelf) | 90 Pounds |
| Maximum Weight Recommendation (Drawer) | 11 Pounds |
| Color | White/Gold |
| Material Type | Engineered Wood, Metal, Pine Veneer |
| Product Care Instructions | Wipe with Dry Cloth |
Image: Dimensional drawing of the Kensi Nightstand, detailing overall and internal measurements.
Warranty and Support
Nathan James offers a lifetime manufacturer warranty for this product. If you encounter any quality issues or require assistance, please contact Nathan James customer support. Refer to the contact information provided in your original packaging or visit the official Nathan James website for support details.
For additional information or to view other products, visit the Nathan James Store.
