Sejoy Leg Massager with Air Compression and Heat

1. Introduction

The Sejoy Leg Massager with Air Compression and Heat is designed to provide comprehensive massage for your legs, ankles, and feet. It utilizes air compression technology combined with a heating function to promote circulation, relieve muscle fatigue, and enhance relaxation. This manual provides essential information for safe and effective use of your device.

Image 1: Sejoy Leg Massager with Air Compression and Heat. The image shows the two leg wraps connected to a handheld controller, with orange glowing lines indicating heat and compression.

2. Safety Information

Please read all safety instructions carefully before using the leg massager. Failure to follow these instructions may result in injury or damage to the device.

• Consult your doctor before use if you have any medical conditions, especially if you have pacemakers, heart conditions, blood clots, or severe circulatory issues.
• Do not use on swollen, inflamed, or injured areas of the skin.
• Unplug the device from the power source when not in use or before cleaning.
• Use caution when applying heat. If the heat feels too intense or uncomfortable, reduce the heat level or turn off the function immediately.
• Keep the device away from water and do not use it in wet environments.
• This device is not intended for use by children without adult supervision.
• Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
• Do not use the device for more than 20 minutes at a time to avoid excessive massage. The device has an automatic 20-minute shut-off feature.

Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is not a medical device and should not be used as a substitute for professional medical advice or treatment.

3. Product Components

The Sejoy Leg Massager package includes the following items:

• 2 x Leg Wraps (left and right)
• 1 x Handheld Controller
• 1 x Power Adapter
• 1 x USB Charging Cable
• 1 x User Manual

Image 2: Package contents. Shows the product box, two leg wraps, handheld controller, power adapter, USB cable, and user manual.

Image 3: Product details. Highlights the controller, solid hose connector, breathable and washable fabric, large airbags, and durable hoses.

4. Setup and Assembly

Follow these steps to set up your Sejoy Leg Massager:

1. Prepare the Leg Wraps: Lay the leg wraps flat. Ensure you identify the correct 'R' for the right foot and 'L' for the left foot.
2. Position Your Feet: Place your feet into the foot sections of the wraps.
3. Secure the Wraps: Use the adjustable Velcro straps to secure the wraps around your feet and calves. Ensure they are snug but comfortable, allowing for air inflation. The maximum calf circumference can be adjusted to 24.60 inches (62.5 cm).
4. Connect the Controller: Insert the air pressure connectors from the leg wraps into the corresponding holes on the handheld controller. Ensure a secure connection.
5. Power On: Connect the power adapter to the controller and plug it into a power outlet. The power LED light on the controller will illuminate.

Image 4: Operation Guide. Illustrates the 6 steps for setting up and starting the massager.

Image 5: Adjustable Wraps. Shows the dimensions of the leg wraps, highlighting their adjustability for a better fit.

5. Operating Instructions

The handheld controller allows you to customize your massage experience.

Image 6: Easy to Use Controller. Details the Power Button, Intensity Adjustment Button, Mode Selection Button, Heating Button, and USB Port.

• Power Button: Press to turn the massager ON or OFF.
• Intensity Adjustment Button (Air Pressure): Press to cycle through 3 intensity levels: Low (for daily care and muscle relaxation), Medium (for relieving muscle stiffness and soreness), and High (for recovery after intense physical activity).
• Mode Selection Button: Press to select from 3 professional massage modes:
  • Mode 1 (Sequence): Focuses on feet and calves in a sequential pattern.
  • Mode 2 (Circulation): Alternates compression between feet and calves to promote circulation.
  • Mode 3 (Whole): Provides simultaneous compression to both feet and calves.
• Heating Button: Press to turn the heating function ON or OFF. The heating function is an auxiliary feature, with a maximum temperature of 112°F (44°C) to prevent burns.

Image 7: Massage Modes. Visual representation of Mode 1 (feet, then calves), Mode 2 (feet and calves alternating), and Mode 3 (feet and calves simultaneously).

Image 8: Massage Techniques. Illustrates how the massager simulates hand kneading and stroking of tissues, targeting toes, sole, heel, instep, ankle, and calf areas.

The massager is designed with a 20-minute auto-off timer to prevent excessive use and ensure safety.

6. Maintenance and Care

Proper maintenance will extend the life of your Sejoy Leg Massager:

• Cleaning: The leg wraps are made of breathable and washable fabric. Disconnect the wraps from the controller and power source before cleaning. Wipe the surface of the wraps and controller with a soft, damp cloth. Do not immerse the controller or wraps in water.
• Storage: Store the massager in a cool, dry place away from direct sunlight and moisture. Avoid placing heavy objects on top of the device.
• Handling: Handle the device with care. Do not pull on the power cord or air hoses excessively.

7. Troubleshooting

If you encounter any issues with your Sejoy Leg Massager, please refer to the following common solutions:

• Device does not turn on: Ensure the power adapter is securely connected to both the controller and a working power outlet. Check if the power outlet is functional.
• No air compression: Verify that the air pressure connectors from the leg wraps are firmly inserted into the controller. Check for any kinks or blockages in the air hoses.
• Heat function not working: Ensure the heat button has been pressed and the indicator light is on. Allow a few minutes for the heat to build up.
• Massage feels too weak/strong: Adjust the intensity level using the intensity adjustment button on the controller.
• Uncomfortable fit: Re-adjust the Velcro straps on the leg wraps to ensure a comfortable and secure fit. The wraps should be snug but not overly tight.

If the problem persists after attempting these solutions, please contact Sejoy customer support for further assistance.

8. Specifications

9. Warranty and Support

Sejoy products are manufactured with quality and customer satisfaction in mind. For information regarding warranty coverage, product support, or to purchase replacement parts, please contact Sejoy customer service directly. Refer to the contact information provided with your product packaging or visit the official Sejoy website.

Date First Available: September 14, 2022