WASSERMANN Water Pressure Diaphragm Pump User Manual

Model: 3WDP4-45-115V

1. Introduction

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your WASSERMANN 115V AC Water Pressure Diaphragm Pump. Please read this manual thoroughly before use and retain it for future reference.

The WASSERMANN Water Pressure Diaphragm Pump is a self-priming booster pump designed to provide strong and consistent water pressure for various applications, including kitchen and bathroom fixtures, RVs, marine vessels, yachts, and garden irrigation systems. Its compact design and 115V AC power plug make it suitable for home use.

Safety Precautions

Always disconnect power before performing any maintenance or installation.
Ensure proper electrical grounding to prevent electric shock.
Do not operate the pump with flammable liquids.
Protect the pump from freezing temperatures to prevent damage.
Ensure all connections are secure and leak-free before operation.

2. Product Features

Voltage: 115 Volt AC power, designed for standard wall sockets.
Flow Rate: Strong output up to 4.0 Gallons Per Minute (GPM).
Pressure Setting: 45 PSI pressure switch for automatic operation.
Self-priming: Capable of drawing water without external priming.
Automatic Operation: Starts when a tap is opened and stops when closed.
Durability: Corrosion-resistant thermoplastic construction with 100% solid copper motor windings.
Protection: Features thermal overload and ignition protection.
Portability: Lightweight design for easy transport and installation.

Diagram showing key features: Thermal overload and ignition protection, Auto on/off easy to install, 100% copper motor low power consumption, 115V power supply.

Key features of the WASSERMANN Water Pressure Diaphragm Pump.

3. Package Contents

Upon unpacking, please verify that all components are present and undamaged:

1 x WASSERMANN 115 Volt Water Pressure Diaphragm Pump (Model: 3WDP4-45-115V)
1 x User Manual (this document)
2 x 1/2" Barbed Hose Adaptors
1 x 1/2" Male Thread Hose Adaptor
1 x Filter (for debris)

WASSERMANN Water Pressure Diaphragm Pump with included accessories: two barbed hose adaptors, one male thread adaptor, and a filter.

The WASSERMANN Water Pressure Diaphragm Pump and its accompanying accessories.

4. Setup

Follow these steps for proper installation of your water pressure pump:

Mounting: Securely mount the pump in a dry, well-ventilated area, protected from direct sunlight and freezing temperatures. Use the integrated mounting feet for stability.
Inlet Connection: Connect your water supply line to the pump's inlet port. It is highly recommended to install the included filter on the inlet side to prevent debris from entering and damaging the pump.
Outlet Connection: Connect your output water line (e.g., to a faucet, shower, or garden hose) to the pump's outlet port. Use the appropriate hose adaptors provided for a secure fit.
Electrical Connection: Ensure the pump's power plug is easily accessible. Plug the 115V AC power cord into a standard household wall socket.

Diagram showing the 1/2 inch hose inlet with a strainer filter and the 1/2 inch hose outlet on the WASSERMANN pump, with water spraying from a hose in the background.

Illustration of hose connections and the debris filter.

A hand plugging the 115V 3.3ft power cord of the WASSERMANN pump into a standard wall socket.

Connecting the pump to a standard 115V AC wall socket.

Diagram illustrating the WASSERMANN pump integrated into a household water system, connected to a sink, shower, and water heater.

Example of pump integration into a water system.

5. Operating Instructions

The WASSERMANN Water Pressure Diaphragm Pump is designed for automatic operation based on water demand:

Automatic Start: When a water fixture (e.g., faucet, shower, hose nozzle) connected to the pump's outlet is opened, the pressure in the system drops, and the pump's internal pressure switch will automatically activate the pump.
Automatic Stop: When all water fixtures connected to the pump's outlet are closed, the pressure in the system builds up to the preset 45 PSI, and the pump's pressure switch will automatically turn the pump off.
Self-Priming: The pump is self-priming, meaning it can draw water from a source without needing to be manually filled with water first. Ensure the inlet hose is submerged in water for optimal priming.

Labeled diagram of the WASSERMANN pump showing the 115V AC motor, thermoplastic construction, 1/2 inch thread, and the 45PSI pressure switch with auto start/stop function.

Key components including the automatic pressure switch.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your pump:

Filter Cleaning: Periodically inspect and clean the debris filter located on the pump's inlet side. A clogged filter can reduce flow and pressure. To clean, unscrew the clear housing, remove the mesh filter, rinse it thoroughly, and reassemble.
Connection Inspection: Regularly check all hose connections and fittings for leaks or signs of wear. Tighten or replace as necessary.
Winterization: If the pump will be exposed to freezing temperatures, it is crucial to drain all water from the pump and connected lines to prevent ice damage.
General Cleaning: Keep the exterior of the pump clean and free from dirt and debris.

Close-up view of the transparent debris filter with a mesh screen, labeled 'STRAINER 50 MESH'.

The removable debris filter for easy cleaning.

7. Troubleshooting

If you encounter issues with your pump, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
Pump does not turn on.	No power supply.	Check if the pump is properly plugged into a live outlet. Verify circuit breaker.
	Pressure switch malfunction.	Ensure a tap is open to trigger the pressure drop. If still no response, contact support.
Low or inconsistent water pressure.	Clogged inlet filter.	Clean the debris filter (refer to Maintenance section).
	Air in the system.	Open all faucets to purge air until a steady stream of water flows.
	Leaks in the system.	Inspect all connections for leaks and tighten or repair as needed.
Pump runs continuously.	Leak in the system or open tap.	Ensure all taps are closed and check for any leaks in the plumbing system.
	Pressure switch issue.	If no leaks are found, the pressure switch may need inspection or replacement. Contact support.
Pump is noisy.	Normal operation or vibration.	Some operational noise is normal. Ensure the pump is securely mounted to minimize vibration.

8. Specifications

Attribute	Value
Brand	WASSERMANN
Model Number	3WDP4-45-115V
Voltage	115 Volts AC
Maximum Flow Rate	4.0 Gallons Per Minute (GPM)
Shut-off Pressure	45 PSI / 3.1 BAR
Maximum Lifting Height	98 Feet
Power Source	Corded Electric
Material	Plastic
Item Weight	6.7 Pounds
Product Dimensions (L x W x H)	8.78" x 5.12" x 4.86"

Close-up of the WASSERMANN pump's label showing model number 3WDP4-45-115V, open flow 4.0 GPM, volts 115V, and shut-off pressure 45 PSI.

Pump label with detailed specifications.

Exploded view diagram of the WASSERMANN pump components including 100% solid copper motor, shaft seal, diaphragm impeller, pump body, and pressure switch.

Internal components of the WASSERMANN pump.

9. Warranty and Support

WASSERMANN is committed to customer satisfaction. For any product-related inquiries or support, please refer to the following:

30-Day Return Policy: Products are covered by Amazon’s hassle-free return and replacement policy for 30 days from the date of purchase.
After 30 Days: For support beyond the initial 30-day period, please contact the seller directly. WASSERMANN is committed to working closely with customers to find satisfactory solutions.

For additional information or to explore other WASSERMANN products, visit the official WASSERMANN Store on Amazon: WASSERMANN Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.