AOSKY BK-RB-G2572

Download PDF
Contents

AOSKY Cordless Blackout Roller Shades Instruction Manual

Model: BK-RB-G2572

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your AOSKY Cordless Blackout Roller Shades. These shades are designed to block 100% of sunlight and UV rays, offering room darkening and thermal insulation. The cordless design enhances safety and ease of use.

Product Overview

The AOSKY Cordless Blackout Roller Shades feature a robust spring-loaded mechanism for smooth operation. Constructed from 100% polyester with a reinforced thermal insulated coating, they are soft, smooth, wear-resistant, and easy to clean. The thermal backing helps regulate room temperature, contributing to energy efficiency.

Three AOSKY Cordless Blackout Roller Shades in grey, white, and black, partially rolled down.

Image: AOSKY Cordless Blackout Roller Shades in various colors.

Diagram showing the fabric composition of the blackout roller shade with layers for shading, anti-UV black coating, and thermal insulation color coating.

Image: Fabric composition illustrating 100% blackout capability with UV protection and thermal insulation layers.

Package Contents

  • 1 x Roller Blind
  • 1 x Set of Mounting Accessories (including installation screws and metal brackets)
  • 1 x Installation Instructions (paper copy)

Note: If any accessories are missing or you encounter issues, please contact customer support for assistance.

Choosing the Right Size

Accurate measurement is crucial for proper fit and function. Consider whether you prefer an inside mount (within the window frame) or an outside mount (covering the window frame).

Outside Mount

  • Shade Width: Should be 4 inches wider than the window's total width (or more) to ensure full coverage and minimize light gaps.
  • Shade Height: The shade height can adjust from 0" to 72", accommodating most standard window heights.
  • No specific requirement for window depth.

Inside Mount

  • Order Width: Should be the exact window width (or 0-1 inch less) to fit within the frame.
  • Shade Height: The shade height can adjust from 0" to 72", accommodating most standard window heights.
  • A minimum of 2 inches of frame depth is required for installation.
  • The fabric width will be approximately 1 inch narrower than the total shade width.
Diagram illustrating how to measure for roller shades, showing blind width, fabric width, and height. Notes that fabric width is 1 inch narrower than blind width.

Image: Guide for measuring shade dimensions, highlighting the difference between blind width and fabric width.

Diagrams showing installation methods for outside mount and inside mount roller shades, with measurement guidelines and a note about light gaps.

Image: Visual guide for outside and inside mount installations, including measurement considerations.

Installation

The product comes with an installation package including screws and metal brackets. For a visual guide, refer to the installation video provided by the manufacturer (if available).

General Steps:

  1. Prepare Tools: Gather necessary tools such as a drill, screwdriver, and measuring tape.
  2. Mark Bracket Positions: Based on your chosen mount type (inside or outside), mark the positions for the metal brackets. Ensure the brackets are level and spaced correctly to support the shade.
  3. Drill Pilot Holes: Drill pilot holes at the marked positions.
  4. Secure Brackets: Attach the metal brackets securely using the provided screws.
  5. Mount the Shade: Carefully align the roller shade with the installed brackets and snap it into place.
  6. Test Operation: Gently pull the shade down and up to ensure smooth operation and proper installation.

Note: The width of the product includes the size of the mounting bracket. A minimum of 2 inches of frame depth is required for inside mount installations.

Operation

Your AOSKY Cordless Roller Shades feature a user-friendly spring system for effortless control.

Raising and Lowering the Shade:

  • To lower the shade, gently pull down on the bottom bar or the cordless handle.
  • To raise the shade, gently pull down on the bottom bar or handle and then release. The shade will retract automatically.
  • The shade can be stopped smoothly at any desired position by simply releasing the bottom bar or handle.

Adjusting Rebound Position and Speed:

The shades allow for adjustment of both the rebound speed and the stopping position.

  • Adjusting Rebound Speed: Open the right side cover of the roller mechanism. Adjust the screw clockwise to slow down the rebound speed, or counterclockwise to increase it.
  • Adjusting Rebound Position: Open the left side cover of the roller mechanism. Adjust the screw counterclockwise to set the desired stopping position for the shade when it retracts.
Close-up images of the roller shade mechanism showing the waterproof back, cordless handle, rote location regulator (left end cap), rote speed regulator (right end cap), and sturdy fabric and hardware.

Image: Detailed view of the cordless handle and adjustment mechanisms for speed and position.

Maintenance

To maintain the appearance and functionality of your roller shades, follow these simple care instructions:

  • Cleaning: Spot clean only. Use a soft, damp cloth with mild soap and water to gently wipe any soiled areas. Avoid harsh chemicals or abrasive cleaners.
  • Dusting: Regularly dust the shades with a soft cloth or a vacuum cleaner with a brush attachment.
  • Mechanism Care: Keep the spring mechanism free from dust and debris to ensure smooth operation.

Troubleshooting

If you encounter any issues with your AOSKY Cordless Roller Shades, please refer to the following common solutions or contact customer support.

ProblemPossible Solution
Shade does not retract smoothly.Check for any obstructions in the mechanism. Adjust the rebound speed (refer to "Adjusting Rebound Position and Speed" section).
Shade does not stay at desired position.Adjust the rebound position (refer to "Adjusting Rebound Position and Speed" section).
Light gaps around the edges.Ensure correct measurements were taken for your chosen mount type. For 100% blackout, an outside mount is recommended to fully cover the window frame.
Missing parts or damaged components.Contact AOSKY customer support immediately for assistance.

Specifications

FeatureDetail
BrandAOSKY
Model NumberBK-RB-G2572
Material100% Polyester
Product Dimensions (Current Model)25"W x 72"H
Color (Current Model)Grey
OpacityBlackout (100% sunlight and UV block)
Operation ModeAutomatic (Cordless Spring System)
Special FeatureUV Protection, Thermal Insulation
Closure TypeCordless
Mounting TypeOutside Mount (also supports Inside Mount)
Product CareSpot Clean Only
Item Weight2.49 pounds

Support & Warranty

For any questions, concerns, or assistance with your AOSKY Cordless Roller Shades, please contact AOSKY customer support. While specific warranty details are not provided in this manual, the manufacturer is committed to providing satisfactory solutions for any product-related issues.

Contact information can typically be found on the product packaging or the retailer's website where the product was purchased.

© 2023 AOSKY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.