MINIWARE TS101 Mini Electric Soldering Iron Kit User Manual

1. Introduction

The MINIWARE TS101 Mini Electric Soldering Iron Kit is a portable and intelligent soldering tool designed for precision work. It features adjustable temperature control, an OLED display, and multiple power supply options, including USB Type-C. This manual provides essential information for the safe and effective operation, setup, and maintenance of your TS101 soldering iron.

Image: Complete MINIWARE TS101 Soldering Iron Kit, including the iron, power supply, USB-C cable, soldering tip, mini holder stand, and welding wire.

2. Safety Information

Always observe the following safety precautions when using the TS101 soldering iron:

• High Temperature Hazard: The soldering iron tip reaches very high temperatures (up to 400°C). Avoid direct contact with the tip to prevent burns.
• Ventilation: Use the soldering iron in a well-ventilated area to avoid inhaling fumes from solder and flux.
• Power Supply: Use only compatible power supplies (DC9V-24V or PD3.0 9V-20V). Ensure the power supply is rated appropriately for the iron's wattage (up to 45W for PD, 65W for DC).
• Unplug When Not in Use: Always unplug the soldering iron when not in use or before performing maintenance.
• Proper Storage: Allow the iron to cool completely before storing. Use the included mini holder stand to safely rest the hot iron during use.
• Children and Pets: Keep the soldering iron out of reach of children and pets.
• Damaged Components: Do not use the soldering iron if any part is damaged. Contact support for assistance.

3. Package Contents

Verify that all items are present in your package:

• TS101 Soldering Iron with B2 Tip
• Mini Holder Stand with Sponge
• 45W Power Supply (USB Wall Charger)
• USB Type-C Cable (1m long)
• Welding Wire

Image: The complete contents of the MINIWARE TS101 Soldering Iron Kit as packaged.

4. Product Overview and Features

The TS101 is designed for portability and performance, offering several key features:

• Portable and Lightweight: Compact design, similar to a pen, allowing for soldering tasks anywhere.
• Fast Heating: Heats up rapidly, with temperature displayed on an OLED screen.
• Adjustable Temperature: Temperature range from 50°C to 400°C.
• External Power Supply Options: Supports DC9V-24V power or PD3.0 9V-20V via USB-C. The included power supply is 45W USB wall charger.
• Programmable: Open-source firmware allows for custom temperature curves and functions via computer connection.
• Smart & Safe: Features dual-temperature and accelerated sensors, sleep mode, and automatic over-heating warning.
• One Boost Button: Quickly increases heat from 300°C to 400°C.
• TS100 Compatibility: Accessories from the previous TS100 model, such as soldering tips, are compatible.

Image: The compact size of the TS101 soldering iron, approximately 168mm in length, shown next to a smartphone and keyboard for scale.

Image: Close-up of the TS101's 128x32 dpi OLED screen, highlighting indicators for instant voltage, working temperature, preset temperature, instant power bar, and the tempered glass for clear display.

Image: Illustration of the TS101's dual power input capabilities: PD 9-20V (45W MAX) via USB-C and DC 9-24V (65W MAX) via the DC5525 port. Note that DC and PD inputs cannot be used simultaneously.

Image: The TS101 soldering iron disassembled into its main body and soldering tip, demonstrating its easy disassembly for portability and storage.

Image: Examples of various power sources compatible with the TS101, including the included USB wall charger, a power bank, a DC power adapter, and a Lipo battery.

Image: Close-up view of the end of the TS101 soldering iron, showing both the USB Type-C port and the DC5525 power input port.

Image: The TS101 soldering iron connected to a laptop via its USB-C port, illustrating its capability for firmware upgrades and custom function programming.

5. Setup

1. Attach Soldering Tip: Carefully insert the desired soldering tip into the heating element end of the TS101 iron. Ensure it is securely seated.
2. Connect Power:
   • For USB-C Power Delivery (PD): Connect the included USB Type-C cable to the TS101's USB-C port and then to the 45W USB wall charger. Plug the charger into a power outlet.
   • For DC Power: Connect a compatible DC9V-24V power adapter (not included, unless specified in your kit) to the DC5525 port.

   Note: Do not use both PD and DC power inputs simultaneously.

3. Position Stand: Place the mini holder stand on a stable, heat-resistant surface. This will be used to safely rest the hot iron when not actively soldering.

Image: The TS101 soldering iron with a soldering tip attached, ready for use.

6. Operating Instructions

1. Power On: Once connected to power, the OLED screen will illuminate. The iron will begin heating to its last set temperature or default temperature.
2. Adjust Temperature: Use the 'A' and 'B' buttons on the iron to increase or decrease the target temperature. The current temperature and target temperature will be displayed on the OLED screen.
3. One Boost Function: To temporarily increase the temperature for demanding joints, press and hold the 'A' button. The temperature will rise from 300°C to 400°C. Release the button to return to the preset working temperature.
4. Sleep Mode: The iron features an intelligent sleep mode. If inactive for a set period, it will automatically lower its temperature to prevent tip oxidation and save energy. Movement will wake it up.
5. Firmware Upgrade: The USB-C port can be used to connect the iron to a computer for firmware upgrades or to customize settings. Refer to the official MINIWARE website for the latest firmware and instructions.

Image: Demonstrates the "One Boost" function. By holding Button A, the iron's temperature can be temporarily increased for faster heating, then returns to the preset temperature upon release.

Image: A hand holding the MINIWARE TS101 soldering iron, illustrating its ergonomic design and ease of use during operation.

Image: The MINIWARE TS101 soldering iron being used to solder components on a circuit board, demonstrating its application in electronics work.

7. Maintenance

• Tip Cleaning: Regularly clean the soldering tip using the included sponge (damp, not wet) or brass wool. This helps prevent oxidation and ensures efficient heat transfer.
• Tinning the Tip: After cleaning and before storing, always tin the tip with a small amount of solder. This protects the tip from oxidation and prolongs its lifespan.
• Storage: Ensure the iron is completely cool before storing. Disassemble the tip from the main body for compact storage if desired.
• General Cleaning: Wipe the body of the iron with a soft, dry cloth. Do not use abrasive cleaners or solvents.

Image: The anti-slip stand for the TS101 soldering iron, designed to securely hold the hot iron during breaks in soldering work.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information and technical support, please refer to the official MINIWARE website or contact their customer service directly. Specific warranty terms may vary by region and retailer.

You can also visit the official MINIWARE Store on Amazon for more product information and support resources: MINIWARE Store