ABUS Combiflex

ABUS Combiflex Bicycle Lock User Manual

Model: Combiflex 105 cm

Introduction

The ABUS Combiflex Bicycle Lock is a compact and flexible security solution designed for quick and easy securing of various items. Featuring a retractable steel cable and a customizable 4-digit combination code, it offers convenient keyless protection against opportunistic theft. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Combiflex lock.

ABUS Combiflex Bicycle Lock, black, showing the combination dials and retractable cable.

Image: The ABUS Combiflex Bicycle Lock, a compact black device with a 4-digit combination dial and a retractable cable mechanism.

Setup: Setting Your Combination

Your ABUS Combiflex lock comes with a factory default combination, typically "0000". Follow these steps to set your personal 4-digit combination:

  1. Ensure the lock is set to the factory default code (0000) or your current known combination. The numbers should be aligned in the center viewing window.
  2. With the cable fully retracted, firmly push the steel nub of the cable (the end that inserts into the lock body) downwards into the device. Hold it in this depressed position.
  3. While holding the cable nub down, rotate the combination dials to your desired 4-digit code. Make sure the numbers are clearly aligned.
  4. Release the steel nub. Your new combination is now set.
  5. To test your new combination, press the larger button on the left side of the lock to release the cable. Pull the cable out. Then, insert the cable end back into the opening. With your new combination set, you should be able to press the smaller button on the right to release the cable. If it doesn't release, re-check your combination and repeat the steps.

Important: Always ensure the cable end is not accidentally pressed in when storing the lock, as this could inadvertently change the combination if the dials are moved.

Diagram showing four steps to set the combination on the ABUS Combiflex lock. Step 1: Press down on the cable end. Step 2: Pull the cable. Step 3: Insert the cable end. Step 4: Press the release button.

Image: Step-by-step diagram illustrating how to set and use the combination on the ABUS Combiflex lock, showing the actions of pressing, pulling, inserting, and releasing the cable.

Video: An official product overview video demonstrating the features and basic operation of the ABUS Combiflex Cable Lock, including its compact size, retractable cable, and combination mechanism.

Operating Instructions

The ABUS Combiflex lock is designed for quick and temporary securing of items. It is ideal for deterring opportunistic theft in low-risk environments.

To Lock an Item:

  1. Set the combination dials to your personal 4-digit code.
  2. Press the larger button on the left side of the lock to release the cable.
  3. Pull the cable out to the desired length and wrap it around the item(s) you wish to secure and a fixed object (e.g., a bike rack, pole).
  4. Insert the free end of the cable into the opening on the lock body until it clicks into place.
  5. Scramble the combination dials to secure the lock.

To Unlock an Item:

  1. Align the combination dials to your personal 4-digit code.
  2. Press the smaller button on the right side of the lock to release the cable end. The cable will automatically retract into the lock body.

Typical Applications:

ABUS Combiflex lock securing an orange bicycle helmet to a bicycle seat post.

Image: The Combiflex lock securing an orange bicycle helmet to the rear rack of a bicycle, demonstrating its use for personal items.

ABUS Combiflex lock securing a bicycle frame to a metal barrier.

Image: A yellow ABUS Combiflex lock securing a bicycle frame to a metal barrier, illustrating its application for bicycle security.

ABUS Combiflex lock securing a large grey waterproof bag to a motorcycle.

Image: The Combiflex lock securing a large grey waterproof bag to the rear of a motorcycle, showing its versatility for securing luggage.

ABUS Combiflex lock securing a motorcycle helmet to the handlebars of a motorcycle.

Image: The Combiflex lock securing a motorcycle helmet to the handlebars of a motorcycle, demonstrating its use for securing personal gear.

Maintenance

To ensure the longevity and smooth operation of your ABUS Combiflex lock, follow these simple maintenance guidelines:

Troubleshooting

If you encounter issues with your ABUS Combiflex lock, refer to the following common problems and solutions:

ProblemPossible Cause / Solution
Cannot set or reset combination.

Ensure the lock is set to the current correct combination (factory default 0000 or your last set code) before attempting to reset.

Make sure the cable's steel nub is fully depressed and held down firmly while setting the new code.

Verify that the new numbers are perfectly aligned in the viewing window before releasing the nub.

Cable does not retract smoothly or gets stuck.

Dirt or debris may be obstructing the mechanism. Clean the cable and the entry point.

Apply a silicone-based lubricant to the cable and mechanism as described in the Maintenance section.

Lock does not open with the correct combination.

Ensure the dials are precisely aligned with your combination. Even a slight misalignment can prevent opening.

Confirm you are using the correct combination. If you recently changed it, try both the old and new codes (if you are unsure).

The combination might have been accidentally changed if the cable nub was pressed in while the dials were moved. Refer to the "Setting Your Combination" section for recovery steps if you suspect this.

Specifications

FeatureDetail
BrandABUS
Model NameCombiflex
Lock TypeCombination Lock
Cable Length105 cm (41.3 inches)
Cable Thickness2.4 mm
Combination4-digit resettable code
MaterialStainless Steel, Plastic
Item Weight85 Grams (3 ounces)
Dimensions (L x W x H)3.94 x 5.91 x 7.87 inches (packaging/product dimensions)
ColorBlack

Warranty Information

The ABUS Combiflex Bicycle Lock comes with a 2-Year Manufacturer Guarantee. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, or to initiate a warranty claim, please contact ABUS customer support.

Customer Support

For further assistance, technical support, or inquiries regarding your ABUS Combiflex Bicycle Lock, please visit the official ABUS website or contact their customer service department. Contact information can typically be found on the ABUS brand store page or on the product packaging.

You can visit the ABUS Store on Amazon: ABUS Amazon Store

Related Documents - Combiflex

Preview ABUS Combiflex Rest 105 + CHR Instructions
This document provides instructions for setting the combination and mounting the ABUS Combiflex Rest 105 + CHR lock. It includes steps for setting the factory default combination and attaching the lock to various surfaces.
Preview ABUS CombiFlex 2501/2502 Combination Lock Instructions
Step-by-step guide on how to set the combination code and operate the ABUS CombiFlex 2501/2502 cable lock for locking and unlocking.
Preview ABUS U-Lock Combination Reset Guide
Learn how to easily reset the combination on your ABUS U-Lock with this step-by-step visual guide. Includes instructions for setting a new personal code.
Preview ABUS 6950AM Bicycle Frame Lock: Installation and User Manual
Comprehensive guide for installing and using the ABUS 6950AM bicycle frame lock. Includes safety warnings, mounting instructions for different options, operation details, and warranty information.
Preview ABUS SH 6055 C Bicycle Lock: Installation and Operation Guide
Comprehensive guide for the ABUS SH 6055 C bicycle lock, covering mounting options, code setting, usage, and safety instructions for transport.
Preview ABUS 6950AM Bike Lock: Installation and Operation Guide
Comprehensive guide for installing and operating the ABUS 6950AM bike lock, including safety instructions, mounting options, and warranty information.