LILYGO T-Display-S3

Download PDF
Contents

LILYGO T-Display-S3 ESP32-S3 Development Board User Manual

Model: T-Display-S3

1. Product Overview

The LILYGO T-Display-S3 is a compact and versatile development board featuring an ESP32-S3 microcontroller and a 1.9-inch ST7789 LCD display. It is designed for various embedded projects, offering Wi-Fi and Bluetooth connectivity, ample memory, and pre-soldered pin headers for ease of use. This manual provides essential information for setting up, operating, and maintaining your T-Display-S3 board.

LILYGO T-Display-S3 Development Board front view

Front view of the LILYGO T-Display-S3 Development Board, showcasing the 1.9-inch LCD display and USB-C port.

2. What's in the Box

Upon unboxing your LILYGO T-Display-S3, you should find the following components:

  • LILYGO T-Display-S3 ESP32-S3 Development Board with 1.9 inch ST7789 LCD Display and Pre-soldered Pin Headers
LILYGO T-Display-S3 packaging and contents

Image showing the LILYGO T-Display-S3 board inside its protective case, along with a small foam insert and a JST connector cable.

3. Features and Specifications

Key Features:

  • Flash Memory: 16MB
  • PSRAM: 8MB
  • Onboard Functions: Boot, Reset, and IO14 Buttons
  • Pin Headers: Pre-soldered for convenience
  • Display: 1.9 inch ST7789 LCD Display
  • Connectivity: Wi-Fi and Bluetooth Low Energy (BLE)
  • Processor: ESP32-S3 Dual-core LX7 microprocessor
  • Power Supply: Supports USB and Li-Po Battery Dual Power Supply (JST GH 1.25mm connector)

Technical Specifications:

SpecificationValue
Standing screen display size1.9 Inches
ProcessorMediaTek_MT8125 (Note: ESP32-S3 is the actual MCU)
RAMPSRAM
Wireless TypeBluetooth, Wi-Fi
Item model numberT-Display-S3
Item Weight1.13 ounces
Product Dimensions (LxWxH)2.44 x 1.02 x 0.39 inches
Flash Memory Installed Size16 MB
Number of Processors2 (Dual-core)
LILYGO T-Display-S3 pinout diagram

Detailed pinout diagram for the LILYGO T-Display-S3, showing GPIOs, power pins, and display connections.

4. Setup Guide

To begin using your LILYGO T-Display-S3, follow these general steps:

  1. Connect to Power: Connect the T-Display-S3 to your computer using a USB-C cable. The board will draw power from the USB connection. Alternatively, you can connect a Li-Po battery to the JST GH 1.25mm connector for portable operation.
  2. Install Drivers: Depending on your operating system, you may need to install USB-to-serial drivers (e.g., CP210x or CH340 drivers) to allow your computer to communicate with the ESP32-S3.
  3. Prepare Development Environment:
    • For Arduino IDE: Install the ESP32 board package. You will need to add the ESP32 board manager URL to your Arduino IDE preferences.
    • For PlatformIO: Set up PlatformIO in your preferred IDE (e.g., VS Code) and configure it for ESP32-S3 development.
  4. Obtain Sample Code: LILYGO provides example code and libraries on their GitHub repository. It is highly recommended to visit the official GitHub page for the latest resources.
LILYGO T-Display-S3 connected via USB-C

The LILYGO T-Display-S3 board with a USB-C cable connected, ready for programming and power.

5. Operating Instructions

The LILYGO T-Display-S3 is a development board, and its operation is primarily driven by the code you upload to it. Here are general guidelines:

  • Programming: Use your chosen development environment (Arduino IDE, PlatformIO) to write and upload your programs (sketches) to the ESP32-S3. Ensure the correct board and port are selected.
  • Display Usage: The 1.9-inch ST7789 LCD display can be controlled via libraries provided by LILYGO or the open-source community. Refer to the sample code for display initialization and drawing functions.
  • Button Functions: The onboard Boot, Reset, and IO14 buttons can be used for various purposes:
    • Reset Button: Restarts the ESP32-S3.
    • Boot Button: Used in conjunction with the Reset button to put the ESP32-S3 into bootloader mode for flashing new firmware.
    • IO14 Button: A general-purpose input button that can be programmed for custom functions within your application.
  • Connectivity: Utilize the Wi-Fi and Bluetooth capabilities of the ESP32-S3 to connect to networks, other devices, or cloud services as per your project requirements.

6. Maintenance

To ensure the longevity and optimal performance of your LILYGO T-Display-S3, consider the following maintenance tips:

  • Handle with Care: The board contains sensitive electronic components. Avoid dropping it or subjecting it to excessive force.
  • Keep Dry: Protect the board from moisture and liquids, which can cause short circuits and damage.
  • Clean Gently: If cleaning is necessary, use a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
  • Proper Storage: When not in use, store the board in an anti-static bag or its original packaging to prevent static discharge damage.
  • Power Management: Always ensure correct voltage and current are supplied to the board. Incorrect power can lead to irreversible damage.

7. Troubleshooting

If you encounter issues with your LILYGO T-Display-S3, consider the following troubleshooting steps:

  • Board Not Detected:
    • Ensure USB-C cable is fully connected and functional.
    • Verify that the correct USB-to-serial drivers are installed on your computer.
    • Try a different USB port or cable.
  • Upload Errors:
    • Confirm the correct board type (ESP32-S3 Dev Module) and COM port are selected in your IDE.
    • Ensure no other applications are using the serial port.
    • Press and hold the Boot button, then press and release the Reset button, then release the Boot button to enter flashing mode before uploading.
    • Check your code for syntax errors.
  • Display Not Working:
    • Verify that the display initialization code in your program is correct for the ST7789 driver.
    • Ensure power is supplied to the display (usually handled by the board itself).
    • Check for any physical damage to the display or its connection.
  • Unexpected Behavior:
    • Review your code logic carefully.
    • Check power supply stability.
    • Consult the LILYGO GitHub repository or community forums for similar issues.

8. Support and Resources

For further assistance, detailed documentation, and community support, please refer to the following resources:

  • Official GitHub Repository: github.com/Xinyuan-LilyGO/T-Display-S3 - This is the primary source for code examples, libraries, and technical documentation.
  • LILYGO Store: LILYGO Amazon Store - For product information and purchasing.
  • Product Service: If you have any questions or suggestions about the product, please feel free to contact LILYGO directly.

© 2024 LILYGO. All rights reserved.

This manual is for informational purposes only. Specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.