UpBright 9V AC/DC Adapter Instruction Manual for Wockoder Turntables

1. Introduction

This instruction manual provides essential information for the safe and effective use of your UpBright 9V AC/DC Adapter. This power supply is designed to provide reliable power to compatible Wockoder Wireless Portable Briefcase Turntable Vinyl Sound Suitcase Record Players, including models KD-3010, KD-3010BL, KD-3011, KD-3011BL, KD-7001, and KD-7001BL. Please read this manual thoroughly before use and retain it for future reference.

2. Safety Information

Use only with devices that require a 9V DC input and a current draw of 1.5A or less. Exceeding these specifications can damage the adapter or the connected device.
Ensure the adapter's plug type matches your wall outlet.
Do not expose the adapter to water, moisture, or extreme temperatures.
Avoid dropping or subjecting the adapter to strong impacts.
Do not attempt to open or repair the adapter. Refer all servicing to qualified personnel.
Keep out of reach of children.

3. Setup and Connection

Follow these steps to properly connect your UpBright 9V AC/DC Adapter to your compatible Wockoder turntable:

Verify Compatibility: Confirm that your Wockoder turntable model (e.g., KD-3010, KD-3010BL, KD-3011, KD-3011BL, KD-7001, KD-7001BL) requires a 9V DC power input. Check your turntable's original manual or specifications.
Inspect the Adapter: Before connecting, visually inspect the adapter for any signs of damage to the casing or cable. Do not use if damaged.
Connect to Device: Locate the DC input port on your Wockoder turntable. Carefully insert the barrel connector of the UpBright adapter into this port. Ensure a snug fit.
Connect to Power Outlet: Plug the AC prongs of the adapter into a standard 100-240VAC 50/60Hz wall outlet.
Power On: Once connected, you can power on your Wockoder turntable according to its operating instructions.

UpBright 9V AC/DC Adapter with US plug and barrel connector

Image 1: The UpBright 9V AC/DC Adapter, showing the US-style wall plug and the barrel connector for the device.

UpBright 9V AC/DC Adapter from a different angle

Image 2: Another view of the UpBright 9V AC/DC Adapter, highlighting its compact design.

4. Operating Instructions

The UpBright 9V AC/DC Adapter operates automatically once connected to a power source and a compatible device. It provides a stable 9V DC output to power your Wockoder turntable.

Ensure the adapter is firmly plugged into both the wall outlet and the turntable.
The adapter is designed for continuous use within its specified voltage and current limits.
It features OVP (Over Voltage output Protection), OCP (Over Current output Protection), and SCP (Short Circuit output Protection) to safeguard both the adapter and your connected device.

5. Care and Maintenance

To ensure the longevity and proper functioning of your UpBright AC/DC Adapter, follow these maintenance guidelines:

Cleaning: Disconnect the adapter from the power outlet and the device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid tightly coiling the cable to prevent damage.
Cable Care: Do not pull on the cable to disconnect the adapter from the wall or device. Always grasp the plug or connector directly. Avoid placing heavy objects on the cable or bending it sharply.

6. Troubleshooting

If you experience issues with your UpBright 9V AC/DC Adapter, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
Device not powering on.	Adapter not fully plugged in. Wall outlet is not active. Device requires different voltage/current. Damaged adapter or cable.	Ensure both ends of the adapter are securely connected. Test the wall outlet with another device. Verify your device's power requirements. This adapter is 9V DC, 1.5A. Inspect the adapter for visible damage. If damaged, discontinue use and replace.
Adapter feels unusually hot.	Overloaded (device drawing too much current). Poor ventilation.	Ensure the connected device's current draw does not exceed 1.5A. Ensure the adapter is in a well-ventilated area, not covered. If overheating persists, discontinue use.
Intermittent power to device.	Loose connection. Damaged cable or connector.	Check all connections for tightness. Inspect the cable and barrel connector for bends or breaks.

If troubleshooting steps do not resolve the issue, please contact UpBright customer support.

7. Product Specifications

Input Voltage: 100-240VAC, 50/60Hz (Worldwide compatible)
Output Voltage: 9V DC
Output Current: 1.5A (1500mA)
Connector Type: Barrel Connector
Protection Features: OVP (Over Voltage output Protection), OCP (Over Current output Protection), SCP (Short Circuit output Protection)
Product Dimensions: Approximately 4 x 3 x 2 inches (L x W x H)
Item Weight: Approximately 4 ounces
Manufacturer: UpBright

Image showing various international outlet adapters (AU, EU, UK) and a warranty certificate

Image 3: Example of international outlet adapters that may be included with the product for international orders, alongside a representation of the UpBright Limited Warranty Certificate.

8. Warranty and Support

Your UpBright 9V AC/DC Adapter comes with a limited warranty. Please refer to the warranty certificate included with your product for specific terms and conditions. Generally, UpBright offers:

Refund Policy: 30 days refund period.
Exchange Policy: 24 months exchange period.

For technical support, warranty claims, or any questions regarding your UpBright product, please contact UpBright customer service through the retailer where the product was purchased or visit the official UpBright store page for contact information.

Online Store: UPBRIGHT Store on Amazon

UPBRIGHT UpBright 9V AC/DC Adapter

UpBright 9V AC/DC Adapter Instruction Manual