1. Introduction
This manual provides essential information for the safe and efficient operation of your BRANDT LVC144IB freestanding dishwasher. Please read these instructions carefully before using the appliance for the first time and keep them for future reference.
Your BRANDT LVC144IB dishwasher is designed for optimal cleaning performance with a capacity of 14 place settings. It features 8 wash programs, an alphanumeric LCD screen for easy control, active convection drying, and an automatic door opening function for enhanced drying. The appliance is equipped with an inverter motor for quiet and efficient operation, and includes safety features such as a leak sensor and leak protection.

Figure 1: Front view of the BRANDT LVC144IB freestanding dishwasher. This image shows the appliance's exterior design, typically featuring a control panel and door handle.
2. Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury.
- Ensure the dishwasher is properly grounded.
- Do not operate the dishwasher if it is damaged or malfunctioning.
- Keep children away from the dishwasher, especially when it is operating.
- Use only detergents and rinse aids specifically designed for automatic dishwashers.
- Do not touch the heating element during or immediately after use.
- Avoid opening the door during operation, as hot water may spray out.
- In case of a leak, immediately turn off the water supply and disconnect the power.
3. Setup and Installation
Your BRANDT LVC144IB is a freestanding dishwasher, designed for flexible placement in your kitchen.
3.1 Unpacking
- Carefully remove all packaging materials.
- Check for any damage during transit. Report any damage to your retailer immediately.
- Ensure all accessories, including the cutlery basket, are present.
3.2 Positioning
- Place the dishwasher on a flat, stable surface.
- Ensure there is adequate space around the appliance for ventilation and door opening.
- Adjust the leveling feet to ensure the dishwasher is perfectly level.
3.3 Water and Electrical Connections
For safety and proper operation, water supply, drainage, and electrical connections should be performed by a qualified technician.
- Connect the water inlet hose to a cold water supply with a minimum pressure of 0.04 MPa and a maximum of 1 MPa.
- Ensure the drain hose is properly connected to a suitable drain, preventing kinks or blockages.
- Connect the dishwasher to a dedicated, grounded electrical outlet (230V).
4. Operating Instructions
Follow these steps for effective dishwashing:
- Load the Dishwasher: Scrape off large food particles. Load dishes, ensuring they do not block the spray arms. Place cutlery in the provided cutlery basket.
- Add Detergent and Rinse Aid: Fill the detergent dispenser with the appropriate amount of dishwasher detergent. Check the rinse aid indicator and refill if necessary.
- Select a Program: Close the dishwasher door. Use the alphanumeric LCD screen to select one of the 8 available wash programs. Refer to the program chart (usually on the inside of the door or in a quick start guide) for details on each program.
- Start the Cycle: Press the Start button. The dishwasher will begin the selected program.
- Automatic Door Opening: Your dishwasher features an automatic door opening function towards the end of the drying cycle to improve drying performance and save energy. Do not force the door closed once it has opened automatically.
- Unload Dishes: Once the cycle is complete, wait a few minutes for dishes to cool before unloading.
5. Maintenance and Cleaning
Regular maintenance ensures optimal performance and extends the lifespan of your dishwasher.
5.1 Cleaning the Filters
- The filter system prevents larger food particles from reaching the pump. Clean the filters regularly (weekly or bi-weekly).
- Twist the cylindrical filter counter-clockwise and remove it.
- Remove the fine filter and the coarse filter.
- Rinse all filters under running water to remove any debris.
- Reassemble the filters in reverse order, ensuring they are securely in place.
5.2 Cleaning the Spray Arms
- Periodically check the spray arm nozzles for blockages.
- If necessary, remove the spray arms and clean the nozzles with a thin wire or toothpick.
5.3 Exterior and Interior Cleaning
- Wipe the exterior with a damp cloth and mild detergent.
- Clean the interior with a dishwasher cleaner or a mixture of vinegar and baking soda to remove limescale and odors.
6. Troubleshooting
Before contacting customer service, refer to the following table for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher does not start | Power supply issue, door not closed properly, program not selected. | Check power connection, ensure door is latched, select a program and press Start. |
| Dishes are not clean | Improper loading, insufficient detergent, clogged spray arms, dirty filters. | Reload dishes correctly, use adequate detergent, clean spray arms and filters. |
| Water not draining | Clogged drain hose or filter, drain pump malfunction. | Clean filters, check drain hose for kinks or blockages. If problem persists, contact service. |
| Excessive noise | Dishes interfering with spray arms, foreign object in pump, improper leveling. | Rearrange dishes, check for foreign objects, ensure dishwasher is level. |
| Leakage | Improper hose connection, damaged door seal, excessive suds. | Check hose connections, inspect door seal, use correct detergent amount. The appliance has a leak sensor for protection. |
7. Specifications
Key technical specifications for the BRANDT LVC144IB freestanding dishwasher:
- Brand: BRANDT
- Model Number: LVC144IB (BRA3660767978966)
- Type: Freestanding Dishwasher
- Capacity: 14 Place Settings
- Noise Level: 44 dB(A)
- Programs: 8
- Drying System: Active Convection Drying with Automatic Door Opening
- Motor Type: Inverter Motor
- Control Panel: Alphanumeric LCD Screen
- Special Features: Leak Sensor, Leak Protection
- Material: Stainless Steel (interior/exterior details)
- Weight: 49 kg
- Electrical Supply: 230V
- Included Components: Cutlery Basket

Figure 2: Energy label for the BRANDT LVC144IB dishwasher. This label indicates an energy efficiency class C, 75 kWh per 100 cycles, 14 place settings, 9.8 liters of water per cycle, a program duration of 3:18, and a noise level of 44 dB.
7.1 Energy Efficiency Data (from Energy Label)
- Energy Efficiency Class: C
- Energy Consumption: 75 kWh / 100 cycles
- Water Consumption: 9.8 Liters / cycle
- Eco Program Duration: 3:18 (hours:minutes)
8. Warranty and Support
For warranty information, please refer to the warranty card included with your appliance or visit the official BRANDT website.
If you encounter any issues not covered in the troubleshooting section or require technical assistance, please contact BRANDT customer support. Have your model number (LVC144IB) and reference number (BRA3660767978966) ready when contacting support.
BRANDT Customer Service: Please refer to your regional BRANDT website or documentation for contact details.





