Introduction
This manual provides essential instructions for the safe and effective use of your BioLite 12V Car Charger Cable. This cable is designed to recharge BioLite BaseCharge power stations directly from a vehicle's 12V car port, offering a convenient alternative to solar charging or when off-grid power is needed.
The cable measures 10 feet (approximately 3 meters) in length and features a High Power Pole (HPP) output connector for the power station and a 12V male car port input connector for the vehicle. It is constructed with a durable 18 AWG gauge for reliable performance.
Image: The BioLite 12V Car Charger Cable, showing both the HPP connector and the 12V car port plug.
Setup
- Identify Connectors: Locate the High Power Pole (HPP) connector on one end of the cable and the 12V male car port plug on the other.
- Connect to Vehicle: Insert the 12V male car port plug firmly into your vehicle's 12V accessory outlet (cigarette lighter socket). Ensure a secure connection.
- Connect to Power Station: Plug the HPP connector into the corresponding HPP input port on your BioLite BaseCharge power station. The connection should be snug.
- Verify Connection: Once both ends are connected, your BaseCharge power station should indicate that it is receiving a charge. Refer to your BaseCharge power station's manual for specific charging indicators.
Image: A BioLite 12V Car Charger Cable connected to a BaseCharge power station, illustrating the setup for charging.
Operating Instructions
Once properly connected, the BioLite 12V Car Charger Cable will begin transferring power from your vehicle's 12V outlet to your BaseCharge power station. The charging rate will depend on your vehicle's electrical system and the specific BaseCharge model.
- Ensure your vehicle's engine is running or the accessory power is active to provide consistent power to the cable.
- Monitor the charging status on your BaseCharge power station's display.
- Avoid obstructing the cable or placing heavy objects on it during operation.
Image: A BioLite BaseCharge power station actively charging, demonstrating its use in an outdoor environment.
Maintenance
To ensure the longevity and optimal performance of your BioLite 12V Car Charger Cable, follow these maintenance guidelines:
- Cleaning: Wipe the cable and connectors with a dry, soft cloth. Do not use liquid cleaners or immerse the cable in water.
- Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Coil the cable loosely to prevent kinks or damage.
- Inspection: Regularly inspect the cable for any signs of wear, cuts, fraying, or damage to the connectors. If damage is observed, discontinue use and replace the cable.
- Connector Care: Keep the connectors free from dirt, dust, and moisture to ensure proper electrical contact.
Troubleshooting
If you encounter issues while using your BioLite 12V Car Charger Cable, consider the following:
- No Charging Indication:
- Ensure both the 12V car port plug and the HPP connector are fully and securely inserted.
- Verify that your vehicle's 12V accessory outlet is functioning (e.g., by testing with another device).
- Check if your vehicle's engine is running or if the accessory power is activated.
- Inspect the cable for visible damage.
- Slow Charging:
- The charging speed can vary based on the vehicle's power output and the BaseCharge model.
- Ensure no other high-power devices are simultaneously drawing power from the same 12V circuit in your vehicle.
If problems persist, contact BioLite customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | BioLite |
| Model Number | ACA0102 |
| Cable Type | DC Power |
| Connector Type | HPP (High Power Pole) Output, 12V Male Car Port Input |
| Cable Length | 10 feet (approx. 3 meters) |
| Wire Gauge | 18 AWG (with 15A fuse) |
| Compatible Devices | BioLite BaseCharge Power Stations |
| Maximum Wattage | 120 watts |
| Maximum Voltage | 8 Volts (Note: Input is 12V from vehicle) |
| Item Weight | 0.005 ounces (0.14 grams) |
| Material | Plastic |
| Indoor/Outdoor Usage | Indoor, Outdoor |
Warranty and Support
BioLite products are designed for durability and performance. For specific warranty information regarding your 12V Car Charger Cable, please refer to the warranty documentation included with your purchase or visit the official BioLite website.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact BioLite customer service. You can find contact information on the BioLite website or through the BioLite Store on Amazon.