1. Introduction
Thank you for choosing the Gosasa S-Shock Multifunction Sports Watch Model 8069. This watch is designed for active individuals, featuring a dual analog and digital display, chronograph, alarm, LED backlight, and 50-meter water resistance. This manual provides detailed instructions to help you understand and operate your watch effectively.
Image 1.1: Front view of the Gosasa S-Shock Multifunction Sports Watch Model 8069.
2. Product Overview
The Gosasa S-Shock 8069 watch combines robust design with multiple functionalities. It features a durable ABS body, scratch-resistant resin dial window, and a comfortable polyurethane strap. Key features include:
- Dual Time Display (Analog and Digital)
- Chronograph (Stopwatch)
- Alarm Function
- LED Backlight
- Full Calendar (Date, Week Display)
- 12/24 Hour Format
- 50-Meter Water Resistance
- Shock Resistance
Watch Components
Image 2.1: Overview of watch functions and button layout.
Refer to Image 2.1 for the location of the following buttons and display elements:
- LIGHT Button: Activates the LED backlight. Also used for setting values.
- MODE Button: Cycles through different modes (Time, Alarm, Chronograph, Dual Time).
- START Button: Starts/pauses chronograph, increases values during setting.
- RESET Button: Resets chronograph, decreases values during setting, exits setup mode.
- DATE Display: Shows the current date.
- WEEK Display: Shows the current day of the week.
- TIME Display: Shows the digital time.
- ALM SIG Indicator: Indicates Alarm and Hourly Chime status.
- TMR CHR Indicator: Indicates Timer and Chronograph status.
- WATER RESIST: Indicates water resistance rating.
3. Setup Instructions
3.1 Setting Digital Time and Date
- In normal time mode, press the MODE button three times to enter the time setting mode. The seconds digits will flash.
- Press the RESET button to cycle through the setting items: Seconds → Hours → Minutes → Month → Date → Day of Week.
- While an item is flashing, press the START button to adjust the value. Hold START to rapidly advance the value.
- Press the MODE button once to exit the setting mode and return to normal time display.
3.2 Setting Analog Time
The analog hands are set independently. Pull out the crown (small knob on the right side of the watch case) and rotate it to adjust the analog time. Push the crown back in to start the analog movement.
3.3 Setting the Alarm
- From normal time mode, press the MODE button twice to enter the alarm setting mode. The hour digits will flash.
- Press the START button to adjust the alarm hour.
- Press the RESET button to select the minute digits, then press START to adjust the alarm minutes.
- Press the MODE button to exit the alarm setting mode.
3.4 Activating/Deactivating Alarm and Hourly Chime
In alarm mode (after pressing MODE twice):
- Press the START button to toggle the alarm ON/OFF. The ALM indicator will appear when the alarm is active.
- Press the RESET button to toggle the hourly chime ON/OFF. The SIG indicator will appear when the hourly chime is active.
4. Operating Instructions
4.1 Using the Chronograph (Stopwatch)
- From normal time mode, press the MODE button once to enter chronograph mode. The display will show "00:00:00".
- Press the START button to begin timing.
- Press the START button again to pause timing.
- Press the START button to resume timing from the paused point.
- While timing is paused, press the RESET button to reset the chronograph to "00:00:00".
- Press the MODE button to exit chronograph mode.
4.2 Activating the LED Backlight
Press the LIGHT button (top left) to illuminate the digital display. The backlight will remain active for a few seconds. This feature allows for clear visibility in low-light conditions.
Image 4.1: The watch display with the LED backlight activated.
4.3 Dual Time Function
The watch supports a dual time display, allowing you to track a second time zone. To set the dual time:
- From normal time mode, press the MODE button four times to enter dual time setting mode. The hour digits of the second time zone will flash.
- Press the START button to adjust the hour.
- Press the RESET button to select the minute digits, then press START to adjust the minutes.
- Press the MODE button to exit dual time setting mode.
5. Maintenance
5.1 Water Resistance
This watch is water-resistant up to 50 meters (5 ATM). This means it is suitable for daily use, hand washing, showering, and swimming in shallow water. Important: Do not press any buttons while the watch is submerged in water, and avoid prolonged exposure to hot water or steam, as this can compromise the water resistance seals.
5.2 Cleaning
To clean your watch, wipe it with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by drying. Avoid using chemical cleaners, which can damage the watch's materials.
5.3 Battery Replacement
The watch uses a long-lasting battery. When the display becomes dim or functions become erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.
6. Troubleshooting
- Digital Display is Blank or Dim: The battery may be low or depleted. Replace the battery.
- Buttons Not Responding: Ensure the watch is not in a locked mode (if applicable, though this model does not specify one). If submerged, remove from water. If the issue persists, a battery replacement or professional inspection may be needed.
- Incorrect Time/Date: Re-set the time and date following the instructions in Section 3.1. Ensure the analog hands are also set correctly (Section 3.2).
- Water Inside the Watch: Immediately take the watch to a professional for inspection and repair to prevent further damage. Avoid exposing the watch to water if seals are compromised.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | 8069 |
| Movement | Digital Quartz |
| Display Type | Dual (Analog & Digital) |
| Case Material | Plastic (ABS) |
| Dial Window Material | Resin |
| Strap Material | Polyurethane |
| Clasp Type | Buckle |
| Case Diameter | 55 mm |
| Case Thickness | 18 mm |
| Band Length (Total) | 255 mm |
| Band Width | 22 mm |
| Product Weight | Approx. 81 g |
| Water Resistance Depth | 50 Meters (5 ATM) |
| Special Features | Chronograph, Dual Time Display, LED Backlight, Alarm, Full Calendar, 12/24 Hour Format, Shock Resistance |
Image 7.1: Watch dimensions including total length, wearing circumference, dial diameter, and band width.
8. Warranty and Support
This Gosasa S-Shock watch comes with a 12-month warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For any questions, technical assistance, or warranty service, please contact your retailer or the Gosasa customer support. Refer to the product packaging or the retailer's website for specific contact information.
