AINOPE 108W 6-Port USB-C Car Charger (Model 2E78) User Manual

1. Product Overview

The AINOPE 108W 6-Port USB-C Car Charger (Model 2E78) is designed to provide efficient and simultaneous charging for multiple electronic devices within your vehicle. It features a main unit that plugs into your car's cigarette lighter socket, offering both USB-A and USB-C ports. An extended hub, connected via a 5-foot cable, provides additional USB-A and USB-C ports for backseat passengers. This design ensures convenient power access throughout the vehicle, supporting fast charging standards like PD 36W and QC 3.0.

Image 1.1: The AINOPE 108W 6-Port USB-C Car Charger, showing the main unit and the extended hub with its cable.

2. Package Contents

• 1 x AINOPE 108W 6-Port USB-C Car Charger (Model 2E78)
• 1 x User Manual

3. Specifications

4. Setup

1. Insert Main Unit: Plug the main car charger unit into your vehicle's 12V-24V cigarette lighter socket. Ensure it is securely seated. The unit features 1 USB-C (PD) and 1 USB-A (QC 3.0) port for front-seat charging.
2. Position Extended Hub: The extended hub is connected to the main unit via a 5-foot cable. Utilize the integrated clip on the extended hub to secure it to a convenient location, such as the back of a seat pocket or a console, allowing easy access for backseat passengers.
3. Connect Devices: Once the charger is powered on (indicated by a light on the extended hub), connect your devices using appropriate USB-A or USB-C cables to any of the available 6 ports.

Image 4.1: The main charger unit installed in the car's front console, with the extended hub positioned for backseat access.

5. Operating Instructions

• Automatic Device Recognition: The built-in smart chip automatically detects the connected device and delivers the optimal charging current for efficient and safe charging.
• Fast Charging: The USB-C ports support Power Delivery (PD) up to 30W, and USB-A ports support Quick Charge (QC 3.0) up to 18W. This allows for rapid charging of compatible devices.
• Simultaneous Charging: All 6 ports can be used simultaneously to charge multiple devices without significant reduction in charging speed, up to a total maximum output of 108W.

Image 5.1: Visual representation of the charger's 108W output and fast charging capabilities for various devices.

6. Safety Guidelines

To ensure safe operation and prolong the life of your AINOPE car charger, please adhere to the following guidelines:

• Read the manual carefully before use and keep it properly.
• Do not disassemble or modify this product by yourself.
• Keep this product away from high temperature heat sources.
• Keep this product away from humid environments.
• If water or other liquids enter the product, it may cause circuit failure.
• Avoid vigorously dropping, throwing, swinging, or shaking this product.
• Do not use corrosive cleaners to clean the product.
• The built-in smart chip protects devices from overcurrent, overcharging, overheating, and short circuits.

7. Troubleshooting

• Q: The charger does not appear to be working.

  A: Ensure the main unit is securely plugged into the vehicle's cigarette lighter socket. Verify that the vehicle's ignition is on, as some vehicles may not supply power to the socket when off.

• Q: My device is not fast charging.

  A: Confirm that your device and charging cable support the PD (Power Delivery) or QC 3.0 (Quick Charge) standards. Not all devices or cables are compatible with fast charging protocols.

• Q: The charger's indicator light remains on after the vehicle is turned off.

  A: Some vehicle models continue to supply power to the cigarette lighter socket even when the ignition is off. If this occurs, unplug the charger to prevent draining the vehicle battery.

8. Warranty and Support

For warranty information, product support, or technical assistance, please refer to the official AINOPE website or contact their customer service directly.

• Manufacturer: AINOPE
• Email: support@ainope.com
• Website: ainope.com