P47 Wireless Headphones User Manual

Introduction

Thank you for purchasing the P47 Wireless Headphones. These over-ear headphones offer a versatile audio experience with both wireless Bluetooth and wired connectivity options. Featuring super bass, volume control, built-in microphone, and support for SD cards and FM radio, they are designed for comfort and high-fidelity stereo surround sound. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance.

What's in the Box

• P47 Wireless Headphones (Red)
• USB Charging Cable
• 3.5mm Audio Cable
• Instruction Manual

Image: The P47 Wireless Headphones in red, shown alongside their retail packaging, illustrating the product and its box.

Product Overview

Familiarize yourself with the key components and controls of your P47 Wireless Headphones.

Image: A detailed diagram highlighting the control buttons on the P47 Wireless Headphones, including Play/Suspend, Answer/Hang on Call, FM/Wireless/Line-in Mode, Power Supply, Volume+/Next Song, and Volume-/Previous Song.

• Play/Suspend / Answer/Hang on Call Button: Controls media playback and manages phone calls.
• M (Mode) Button: Switches between FM, Wireless (Bluetooth), and Line-in modes.
• Power Supply Button: Turns the headphones on or off.
• Volume+/Next Song Button: Increases volume or skips to the next track.
• Volume-/Previous Song Button: Decreases volume or goes to the previous track.
• Microphone: For hands-free calling.
• 3.5mm Audio Jack: For wired connection.
• Micro USB Charging Port: For charging the headphones.
• SD Card Slot: For playing music directly from an SD card.

Image: A diagram illustrating the comfort features of the P47 Wireless Headphones, including soft memory protein earmuffs, snug pads, flexible design to fit various head shapes, and an adjustable headband.

Setup

1. Charging the Headphones

Before first use, fully charge your headphones. Connect the supplied USB charging cable to the micro USB port on the headphones and the other end to a USB power source (e.g., computer USB port, wall adapter). The LED indicator will show charging status (usually red while charging, off or blue when fully charged). A full charge takes approximately 1-2 hours.

2. Powering On/Off

• To Power On: Press and hold the Power Supply button for a few seconds until the LED indicator lights up and you hear a power-on prompt.
• To Power Off: Press and hold the Power Supply button again for a few seconds until the LED indicator turns off and you hear a power-off prompt.

3. Bluetooth Pairing (Wireless Mode)

1. Ensure the headphones are powered off.
2. Press and hold the Power Supply button until the LED indicator flashes blue and red alternately, indicating pairing mode.
3. On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
4. Select "P47" from the list of found devices.
5. Once paired, the LED indicator will flash blue slowly, and you will hear a connection confirmation sound.
6. If prompted for a password, enter "0000".

The headphones will automatically attempt to reconnect to the last paired device when powered on.

4. Wired Connection (Line-in Mode)

You can use the headphones with a 3.5mm audio cable for a wired connection, even if the battery is depleted. Simply plug one end of the 3.5mm audio cable into the headphone's 3.5mm audio jack and the other end into your audio device's headphone jack. The headphones will automatically switch to Line-in mode.

Operating Instructions

Music Playback

• Play/Pause: Press the Play/Suspend button once.
• Next Track: Press and hold the Volume+/Next Song button.
• Previous Track: Press and hold the Volume-/Previous Song button.
• Volume Up: Short press the Volume+/Next Song button.
• Volume Down: Short press the Volume-/Previous Song button.

Call Management

• Answer/End Call: Press the Answer/Hang on Call button once.
• Reject Call: Press and hold the Answer/Hang on Call button for 2 seconds.
• Redial Last Number: Double-press the Answer/Hang on Call button.

Mode Switching (M Button)

Press the 'M' button to cycle through the available modes:

• Bluetooth Mode: For wireless audio from your paired device.
• FM Radio Mode: To listen to FM radio stations.
• SD Card Mode: If an SD card with audio files is inserted.
• Line-in Mode: When a 3.5mm audio cable is connected.

In FM Radio Mode, short press the Play/Suspend button to auto-scan and save stations. Use Volume+/Volume- to switch between saved stations.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the headphones. Do not use abrasive cleaners or solvents.
• Storage: When not in use, store the headphones in a cool, dry place, away from direct sunlight and extreme temperatures. The foldable design allows for compact storage.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the headphones regularly, even if not in frequent use.
• Water Resistance: The headphones are listed as waterproof. However, avoid prolonged exposure to water or submersion. Dry thoroughly if exposed to moisture.

Troubleshooting

Specifications

Warranty and Support

This product comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or contact the retailer where you purchased the product. For technical support or further assistance, please reach out to the customer service department of the brand or retailer.

Please retain your proof of purchase for any warranty claims.