Important Safeguards
Please read and save this Instruction Manual. When using electrical appliances, basic safety precautions should be followed, including:
- Read all instructions.
- Remove all bags and packaging from appliance before use.
- Do not leave appliance unattended when in use.
- Ensure the appliance is properly assembled before operation.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against electrical shock, do not immerse cord, plugs, or appliance in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to “off”, then remove plug from wall outlet.
- Do not use appliance for other than intended use.
Parts & Features

Main Unit: The base contains the heating element and motor for the stirring arm. The clear bowl sits on top of the base during operation and doubles as a serving dish.
Stirring Arm: A rotating arm designed to circulate kernels evenly across the heating plate for optimal popping.
Measuring Cup/Butter Melting Tray: This dual-purpose cup is used to measure kernels and can be placed on top of the clear bowl to melt butter during popping.
SmartStore™ Design: The base of the popcorn maker nests inside the clear bowl for compact and convenient storage.
Before First Use
- Remove all packaging materials and stickers from the appliance.
- Wipe down the heating plate with a damp cloth.
- Wash the clear bowl, stirring arm, and measuring cup with warm, soapy water. Rinse thoroughly and dry completely.
- Ensure all parts are dry before assembly and use.
Using Your Popcorn Maker
Follow these steps to make delicious popcorn:
- Place the Popcorn Maker base on a clean, stable, and dry surface.
- Attach the stirring arm to the center post on the heating plate.
- Add 1-2 tablespoons of cooking oil (vegetable, canola, or coconut oil recommended) to the heating plate.
- Using the included measuring cup, add 1/2 cup of popcorn kernels to the heating plate. Do not overfill.
- Place the clear bowl securely onto the base.
- If desired, place butter (up to 2 tablespoons) in the measuring cup and place the measuring cup on top of the clear bowl. The heat from the popping corn will melt the butter.
- Plug the Popcorn Maker into a 120V AC outlet.
- Press the Power Button to start popping. The stirring arm will begin to rotate.
- Popcorn will begin to pop within 3-5 minutes. Once popping slows significantly (about 95% of kernels popped), press the Power Button to turn off the appliance.
- Carefully remove the clear bowl from the base using oven mitts, as it will be hot.
- If butter was melted, carefully pour it over the popcorn.
- The clear bowl can be flipped over and used as a serving dish.
The popcorn maker can produce up to 12 cups of popcorn, perfect for family movie nights.
The clear bowl conveniently doubles as a serving dish after popping.
Cleaning & Maintenance
Proper cleaning ensures the longevity of your Popcorn Maker:
- Always unplug the appliance and allow it to cool completely before cleaning.
- Remove the clear bowl and stirring arm. Wash these parts in warm, soapy water. They are also top-rack dishwasher safe.
- Wipe the heating plate and exterior of the base with a damp cloth. Do not immerse the base in water or any other liquid.
- Do not use abrasive cleaners or scouring pads, as this may damage the non-stick surface.
- Ensure all parts are thoroughly dry before storing.
The nonstick surface of the heating plate allows for easy cleanup.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not turn on. | Not plugged in; Power button not pressed. | Ensure the appliance is securely plugged into a working outlet. Press the Power Button. |
| Popcorn not popping or very few kernels pop. | Insufficient oil; Old or dry kernels; Too many kernels. | Ensure enough oil is used (1-2 tbsp). Use fresh popcorn kernels. Do not exceed 1/2 cup of kernels. |
| Popcorn tastes burnt. | Left on too long after popping; Too much oil. | Turn off the appliance immediately once popping slows. Use recommended oil amount. |
| Stirring arm not rotating. | Stirring arm not properly attached. | Ensure the stirring arm is securely attached to the center post. |
Specifications
- Model: DSSP100GBAQ04
- Voltage: 120V ~ 60Hz
- Power Rating: 550W
- Capacity: 3 Quarts (up to 12 cups of popped popcorn)
- Dimensions: 8.9"L x 10.9"W x 8.3"H
- Weight: 3.66 Pounds
- Material: Plastic
Warranty & Support
DASH products are manufactured to high quality standards. This appliance is covered by a 1-year limited warranty from the date of original purchase. For warranty service, please contact DASH Customer Support. You may also visit the official DASH website for more information and support resources.
For additional assistance, please refer to the official user guide PDF: DASH SmartStore™ Stirring Popcorn Maker User Guide





