Graco TurboBooster 2.0 Backless Booster Car Seat User Manual

Introduction

This manual provides essential information for the safe and proper use, installation, maintenance, and troubleshooting of your Graco TurboBooster 2.0 Backless Booster Car Seat. Please read all instructions carefully before using the product and keep this manual for future reference.

The Graco TurboBooster 2.0 Backless Booster Car Seat in Denton is designed to ensure your child's safety and comfort during car rides. It is suitable for children aged 4 to 10 years, weighing between 40 and 100 pounds, and up to 57 inches tall.

Important Safety Information

Always prioritize your child's safety. This booster seat is engineered and crash tested to meet or exceed US standard FMVSS 213. Adhere to all local and state laws regarding car seat usage.

• Ensure the vehicle's seat belt fits properly across your child's shoulder and lap.
• Never use this booster seat with a child weighing less than 40 pounds or taller than 57 inches.
• Do not use bleach to clean any part of the booster seat.
• Always secure the booster seat and your child, even when the seat is unoccupied.

Setup and Installation

The Graco TurboBooster 2.0 is designed for easy setup. It is a backless booster seat that uses the vehicle's seat belt for installation.

Unpacking and Initial Inspection

Carefully remove all components from the packaging. Inspect the booster seat for any signs of damage or missing parts. If any issues are found, do not use the product and contact customer support.

Adjusting Armrests

The armrests are height-adjustable to provide superior comfort for your growing child. Locate the adjustment mechanism on the sides of the armrests and adjust them to the appropriate height for your child.

Figure 1: The height-adjustable armrests on the Graco TurboBooster 2.0. These armrests can be moved up or down to ensure a comfortable fit for your child.

Vehicle Installation

This booster seat is installed using the vehicle's lap and shoulder belt system. Ensure the booster seat is placed flat on the vehicle seat.

1. Place the booster seat firmly on the vehicle's back seat.
2. Seat your child in the booster seat.
3. Route the vehicle's lap belt under both armrests and across your child's upper thighs.
4. Route the vehicle's shoulder belt through the red belt guide near your child's shoulder. The shoulder belt should lie flat across your child's chest and collarbone, not on the neck or face.
5. Buckle the seat belt and pull it snug, ensuring there is no slack.

Figure 2: Proper seat belt positioning with the Graco TurboBooster 2.0. The lap belt should be low on the hips, and the shoulder belt should cross the middle of the shoulder and chest.

Operating Instructions

Once installed, the Graco TurboBooster 2.0 is straightforward to use. Its primary function is to position your child correctly for the vehicle's seat belt.

Securing Your Child

Always ensure your child is properly secured every time they ride in the booster seat. The lap belt should be low on the hips, touching the tops of the thighs. The shoulder belt should cross the middle of the shoulder and chest.

Using Hideaway Cup Holders

The booster seat features two hideaway cup holders. To use them, simply pull them out from the sides of the seat. Push them back in when not in use for a more compact design.

Figure 3: The convenient hideaway cup holders on the Graco TurboBooster 2.0. These cup holders can be extended for use or retracted for a more compact profile.

Care and Maintenance

Regular cleaning and maintenance will prolong the life of your Graco TurboBooster 2.0.

Cleaning the Seat Pad

The seat pad is machine-washable for easy cleaning. Refer to the care label on the seat pad for specific washing instructions. Typically, it can be machine washed in cold water on a delicate cycle and drip-dried.

• Do not use bleach.
• Do not iron.
• Do not dry clean.

Cleaning Plastic and Metal Parts

Plastic and metal parts can be wiped clean with mild soap and cool water. Do not use abrasive cleaners or solvents.

Troubleshooting

If you encounter any issues with your Graco TurboBooster 2.0, refer to the common problems and solutions below.

If problems persist, please contact Graco customer support.

Specifications

Figure 4: Key dimensions of the Graco TurboBooster 2.0, illustrating its compact and portable design.

Warranty Information

Graco products are designed for durability and safety. For detailed warranty information, please refer to the official Graco website or the warranty card included with your product. Keep your proof of purchase for any warranty claims.

Customer Support

For further assistance, questions, or to report any issues, please contact Graco customer support:

• Visit the official Graco Store on Amazon.
• Refer to the Installation Manual (PDF) for additional details.