SANODESK Electric Standing Desk

Introduction

Thank you for choosing the SANODESK Electric Standing Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your 60 x 24 inch whole-piece desktop height-adjustable stand-up desk. Designed for ergonomic comfort in home and office environments, this desk features a robust electric lifting system and a convenient 6-button controller.

Key features include:

• 60" x 24" Whole-Piece Desktop: A spacious and seamless work surface designed to accommodate multiple monitors, laptops, and other office essentials, fostering creativity and productivity.
• LED Memory Control Panel: An intuitive 6-button controller allows for easy height adjustments and includes 4 memory presets for quick transitions between preferred sitting and standing heights.
• Electric Lifting System: Smooth and quiet operation with a height range of 28.1 inches to 45.7 inches, suitable for various users and tasks. The industrial-grade steel frame ensures stability and supports up to 176 lbs.
• Sleek and Timeless Design: A black frame paired with a white tabletop, featuring a waterproof and rustproof paint finish for durability and easy cleaning, complementing diverse decorative styles.

Safety Information

Please read and understand all safety instructions before assembly and use.

• Do not exceed the maximum weight recommendation of 176 pounds (80 kg) to ensure stability and prevent tipping.
• Ensure the desk is properly assembled and anchored if necessary to maintain stability during use.
• Keep children and pets away from the desk during operation to prevent injury.
• Ensure no obstructions are in the path of the desk's movement when adjusting height.
• Do not sit or stand on the desk.

Parts List

Before beginning assembly, verify that all parts are present and undamaged. Refer to the included packaging for specific part labels.

• Desktop (Whole-Piece)
• Lifting Columns (Legs)
• Desk Feet
• Crossbeam
• Transmission Rod
• Coupling
• Motor with Keypad (Control Panel)
• Power Plug/Adapter
• Support Plates
• Hooks (2)
• Cable Tray
• Assembly Tools (Allen key, Spanner)
• Screws and Fasteners (various sizes, individually packaged)

Setup and Assembly

Assembly is straightforward and typically takes less than an hour. An Allen key is provided for most steps. For detailed visual instructions, please refer to the official SANODESK installation video below.

Assembly Steps:

1. Prepare the Motor and Columns: Insert the coupling into the motor. Ensure the motor's direction is correct as shown in the video.
2. Attach Desk Feet: Securely attach the desk feet to the bottom of the lifting columns using the provided bolts and Allen key. Tighten in a criss-cross pattern for stability.
3. Install Crossbeam: Connect the crossbeam between the two lifting columns. Pay attention to the alignment pins and ensure the piece with the motor cutout is correctly positioned. Tighten all bolts.
4. Install Support Plates: Attach the support plates to the top of the frame, which will later connect to the desktop.
5. Assemble Desktop: If your model requires joining desktop pieces, align them using the wooden pins and secure them with the provided brackets and screws. (Note: This specific model features a whole-piece desktop, simplifying this step.)
6. Attach Desktop to Frame: Carefully place the desktop onto the assembled frame. Use the provided screws to secure the desktop to the support plates. Start with outer screws and then inner ones.
7. Install Control Panel and Accessories: Mount the 6-button control panel to the underside of the desktop using the provided screws. Install the heavy-duty hooks on each side.
8. Cable Management: Install the cable tray and use the provided cable ties and clips to organize all power and control cables neatly under the desk. Connect the power box and control panel cables.
9. Final Connections: Plug in the desk to a power outlet.

Operating Instructions

Your SANODESK Electric Standing Desk is equipped with an intuitive 6-button control panel for easy height adjustment.

Control Panel Functions:

• Up/Down Arrows (▲ / ▼): Press and hold to manually adjust the desk height up or down. The digital display will show the current height.
• Memory Presets (1, 2, 3, 4): These buttons allow you to save and recall your preferred sitting and standing heights.

Setting Memory Presets:

1. Adjust the desk to your desired height using the Up/Down arrows.
2. Press the 'M' button (or similar memory set button, if present) once. The display may flash 'S'.
3. Within 3 seconds, press the desired preset button (1, 2, 3, or 4). The height is now saved to that button.
4. To recall a saved height, simply press the corresponding preset button. The desk will automatically move to the saved position.

The desk's height range is from 28.1 inches (lowest sitting position) to 45.7 inches (highest standing position).

Image: The desk's adjustable height range, illustrating the minimum and maximum positions for ergonomic use.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your SANODESK Electric Standing Desk.

• Cleaning: Wipe the desktop and frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Inspection: Periodically check all screws and fasteners to ensure they are tight. Re-tighten if necessary.
• Cable Management: Ensure cables remain neatly organized and are not pinched or tangled, especially during height adjustments.
• Motor Care: The electric motor is designed for durability. Avoid overloading the desk beyond its weight capacity.

Troubleshooting

If you encounter issues with your desk, try the following common troubleshooting steps:

• Desk Not Moving: Check all power connections. Ensure the power cable is securely plugged into both the desk and the wall outlet.
• Uneven Height Adjustment: Perform a reset procedure (refer to the full manual or contact customer support for specific steps). Ensure the desk is not overloaded or unevenly weighted.
• Error Codes: If the display shows an error code, consult the full product manual or contact SANODESK customer service for assistance.
• Noise During Operation: A slight hum is normal during operation. Excessive or unusual noise may indicate an issue. Ensure all bolts are tightened.

Specifications

Warranty and Support

Your satisfaction is our priority. If you encounter any problems when you receive the product or use it, we provide a 30-day return or exchange service. The product also comes with a Limited Warranty (details available upon request or in the full product documentation).

For assistance, please contact customer service through your order page. We are committed to offering support and resolving any issues you may experience.