TENSSENX TSRC X7 GPS Drone User Manual

1. Introduction

This user manual provides essential information for the safe operation and maintenance of your TENSSENX TSRC X7 GPS Drone. Please read this manual thoroughly before operating the drone to ensure proper function and to maximize your flying experience. The TSRC X7 is equipped with advanced features such as a 1080P HD camera, GPS auto-return, and intelligent flight modes, making it suitable for both adults and kids, and easy for beginners to master.

2. Safety Guidelines

Always prioritize safety during drone operation. Failure to follow these guidelines may result in injury, damage to property, or legal issues.

• Pre-Flight Check: Ensure the drone and remote control batteries are fully charged. Inspect propellers for damage and ensure they are securely attached.
• Flight Environment: Fly in open areas, away from people, animals, buildings, and obstacles. Avoid flying near airports, power lines, or restricted airspace.
• Weather Conditions: Do not fly in strong winds, rain, snow, or fog. Optimal conditions are calm and clear.
• Maintain Visual Line of Sight: Always keep the drone within your visual line of sight. Do not rely solely on the FPV feed.
• Respect Privacy: Be mindful of privacy when recording photos or videos.
• Emergency Procedures: Familiarize yourself with the emergency stop function and auto-return features.
• Age Recommendation: This drone is suitable for adults and kids. Adult supervision is recommended for younger users.

3. Package Contents

Upon unboxing, please verify that all items listed below are present and in good condition.

Figure 3.1: Contents of the TENSSENX TSRC X7 GPS Drone package.

• 1 x GPS Drone
• 1 x Rechargeable Controller
• 2 x Modular Batteries
• 2 x USB Charger Cables
• 2 x Extra Propeller Blades (sets)
• 2 x Extra Landing Feet
• 1 x Screwdriver
• 1 x User Manual (this document)

4. Components Overview

Familiarize yourself with the main components of your drone and remote control.

Figure 4.1: Overview of the TENSSENX TSRC X7 GPS Drone and its remote control.

4.1 Drone Components

• Propellers: Four main propellers for lift and thrust.
• Motors: Drive the propellers.
• 1080P HD Camera: Front-facing camera for photo and video capture.
• Optical Flow Sensor: Located on the bottom, assists with stable hovering indoors.
• GPS Module: Enables precise outdoor positioning and intelligent flight features.
• Modular Battery Compartment: Houses the drone's power source.
• Landing Gear: Provides stability during takeoff and landing.

4.2 Remote Control Components

• Control Sticks: For flight direction and altitude.
• Phone Holder: Securely holds your smartphone for FPV viewing.
• Function Buttons: Dedicated buttons for features like One Key Takeoff/Landing, Auto Return, and Speed Adjustment.
• Power Button: To turn the remote control on/off.

5. Setup

5.1 Charging Batteries

The drone comes with two modular batteries, providing up to 26 minutes of flight time (2 x 13 minutes).

Figure 5.1: The drone is powered by two modular batteries, offering extended flight time.

1. Connect the USB charging cable to the drone battery.
2. Plug the other end of the USB cable into a 5V/2A USB adapter (not included).
3. The battery indicator lights will show charging status and turn solid when fully charged.
4. Charge the remote control using its dedicated USB cable.

5.2 Installing Batteries

• Drone Battery: Insert the charged modular battery into the drone's battery compartment until it clicks into place.
• Remote Control Battery: The remote control has a built-in rechargeable battery.

5.3 Propeller Installation

Ensure propellers are installed correctly according to their markings (A or B) on the corresponding motor arms. Use the provided screwdriver to secure them.

5.4 App Installation and Connection

Download the official TENSSENX drone app from your smartphone's app store. This app enables FPV viewing and access to intelligent flight modes.

1. Turn on the drone and remote control.
2. On your smartphone, enable Wi-Fi and connect to the drone's Wi-Fi network (usually named 'TSRC-X7-XXXXXX').
3. Open the TENSSENX app. The live FPV feed should appear.
4. Important: Some Android devices may require turning on airplane mode before connecting to the drone's Wi-Fi for stable connection.

6. Operating Instructions

6.1 Pre-Flight Checklist

• Batteries fully charged.
• Propellers correctly installed and secure.
• Flight area clear of obstacles and people.
• App connected and FPV feed visible.

6.2 Calibration

For stable flight, especially outdoors with GPS, proper calibration is crucial.

• GPS Calibration: Perform GPS calibration in an open outdoor area. Follow the on-screen prompts in the app or the remote control's indicator lights.
• Compass Calibration: Rotate the drone horizontally and then vertically as instructed by the app or remote control.

6.3 Take-off and Landing

Figure 6.1: The TSRC X7 offers easy flight controls for beginners.

• One Key Takeoff: Press the One Key Takeoff button on the remote control, and the drone will automatically ascend to a safe hovering altitude.
• Manual Takeoff: Push both control sticks down and outwards to start the motors, then slowly push the left stick up to ascend.
• One Key Landing: Press the One Key Landing button, and the drone will automatically descend and land gently.
• Manual Landing: Slowly pull the left control stick down to descend.

6.4 Basic Flight Controls

• Left Stick (Throttle/Yaw): Up/Down for altitude, Left/Right for rotation (yaw).
• Right Stick (Forward/Backward/Sideways): Up/Down for forward/backward movement, Left/Right for sideward movement.
• Altitude Hold: The drone maintains a stable altitude automatically, making it easier to control.
• Headless Mode: In this mode, the drone's orientation is irrelevant; it will move relative to the pilot's position.

6.5 Intelligent Flight Modes

The TSRC X7 offers several intelligent flight modes for enhanced flying and filming.

Figure 6.2: Explore creative flight paths with intelligent modes.

• Follow Me Mode: The drone will automatically follow the remote control or your smartphone, capturing dynamic footage.


Figure 6.3: The drone can automatically follow a moving subject.

• Waypoint Flight: Tap desired points on the map in the app, and the drone will fly along the designated path.


Figure 6.4: Plan your flight route with Waypoint mode.

• Circle Flight (Point of Interest): Set a central point, and the drone will circle around it at a specified radius and altitude, keeping the point in frame.

6.6 Auto Return to Home (RTH)

The GPS Auto Return feature ensures the drone safely returns to its takeoff point.

Figure 6.5: The drone's GPS Return to Home function.

• One-Key RTH: Press the RTH button on the remote control to initiate an automatic return.
• Low-Battery RTH: The drone will automatically return when the battery level is critically low.
• Signal Loss RTH: If the connection between the drone and remote control is lost, the drone will automatically return to its last recorded home point.

6.7 Camera Operation

The drone is equipped with a 1080P HD camera for capturing high-quality aerial footage.

Figure 6.6: The 1080P HD camera captures clear images and video.

• Photo Capture: Press the photo button on the remote control or in the app to take a still image.
• Video Recording: Press the video button to start/stop recording. Videos are saved to your smartphone via the app and can also be saved to a microSD card inserted into the drone (not included) for higher resolution.
• FPV (First Person View): View live video feed on your smartphone via the app.

7. Maintenance

Regular maintenance helps prolong the life of your drone.

• Cleaning: Use a soft, dry cloth to clean the drone body and camera lens. Do not use harsh chemicals.
• Propeller Inspection: Regularly check propellers for cracks, bends, or chips. Replace damaged propellers immediately using the provided spares and screwdriver.
• Battery Care: Store batteries in a cool, dry place. Do not overcharge or over-discharge. If storing for extended periods, charge to about 50-60%.
• Storage: Store the drone and remote control in a cool, dry environment, away from direct sunlight and extreme temperatures.

8. Troubleshooting

If you encounter issues, refer to the following common problems and solutions:

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official TENSSENX website. Keep your purchase receipt as proof of purchase for any warranty claims.