Introduction
This manual provides comprehensive instructions for the safe and effective use of your Marvel Spider-Man Spider Strike ‘N Splash Blaster. Please read all instructions carefully before operation and retain this manual for future reference.
The Spider-Man Spider Strike ‘N Splash Blaster combines dart-blasting action with a water-blasting feature, offering two distinct play modes. It is designed for users aged 5 and up.

Image: The Marvel Spider-Man Spider Strike ‘N Splash Blaster.
Safety Information
WARNING: Small parts may be generated. Not for children under 3 years.
Always use official NERF darts. Do not modify darts or blaster. Do not aim at eyes or face. Use of eyewear is recommended for players and people within range.
What's in the Box
Your package should contain the following items:
- Marvel Spider-Man Spider Strike ‘N Splash Blaster
- 3 NERF Darts
For additional product information and support, please visit the official Hasbro website: Hasbro Product Support.

Image: The product packaging, displaying the blaster and included darts.
Setup
1. Loading Darts
- Ensure the blaster is not aimed at anyone or anything.
- Insert one NERF dart into the front barrel of the blaster until it is securely in place.

Image: Loading a NERF dart into the blaster.
2. Filling Water Reservoir
- Locate the water fill cap on the top of the blaster.
- Open the cap and fill the reservoir with clean tap water.
- Close the cap securely to prevent leaks.

Image: Filling the water reservoir.
Operating Instructions
1. Firing Darts
- Load a dart as described in the Setup section.
- Hold the blaster firmly.
- Pull back the priming handle (located at the rear of the blaster) until it clicks into place.
- Aim at a safe target, away from eyes and face.
- Press the trigger to launch the dart.

Image: Child aiming the blaster for dart firing.
2. Water Blasting
- Ensure the water reservoir is filled.
- Hold the blaster firmly.
- Press the designated water blast button (typically located near the handle) to activate the water stream.
- Release the button to stop the water stream.

Image: Child using the water blast feature of the blaster.
Maintenance
- Cleaning: After water play, empty the water reservoir completely. Rinse with clean water and allow to air dry thoroughly to prevent mold or mildew.
- Storage: Store the blaster in a cool, dry place away from direct sunlight. Remove darts from the blaster before storage.
- Darts: Use only official NERF darts. Inspect darts regularly for damage and replace as needed to ensure optimal performance and safety.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Darts not firing or weak shot. | Dart not fully loaded; Blaster not primed; Damaged dart. | Ensure dart is fully inserted; Pull priming handle back until it clicks; Replace damaged darts. |
| Water not blasting or weak stream. | Water reservoir empty; Air in system; Obstruction in nozzle. | Refill water reservoir; Pump the water blast button a few times to clear air; Check nozzle for debris. |
Specifications
- Model Number: F7852
- Brand: Marvel
- Manufacturer: Hasbro
- Product Dimensions: 2.64 x 14.02 x 10 inches
- Item Weight: 13 ounces
- Recommended Age: 5 years and up
- Release Date: June 1, 2023
Warranty and Support
For warranty information or customer support, please refer to the contact details provided on the product packaging or visit the official Hasbro website. Keep your proof of purchase for any warranty claims.
Official Hasbro Website: go.hasbro.com





