1. Introduction
Thank you for choosing the Snow Joe SJ627E-CVR 15-Amp Corded Electric Snow Blower. This powerful electric snow blower is designed for effortless snow removal, capable of clearing up to 840 pounds of snow per minute. With a 22-inch clearing path and 13-inch deep capacity, it efficiently tackles heavy snow on large driveways and walkways. Its dual LED lights ensure visibility for nighttime operation, and the 180-degree adjustable chute provides precise control over snow placement. This manual provides essential information for the safe assembly, operation, and maintenance of your snow blower.
2. Important Safety Information
Always read and understand all instructions before operating the snow blower. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
General Safety Warnings:
- Read the Manual: Familiarize yourself with the controls and proper use of the equipment.
- Wear Appropriate Attire: Always wear appropriate winter clothing, including eye protection, and non-slip footwear.
- Keep Hands and Feet Clear: Never place hands or feet near rotating parts or the discharge opening.
- Clear the Area: Before starting, inspect the area to be cleared and remove all objects that could be thrown by the auger.
- Cord Management: Be aware of the power cord's location at all times to avoid accidental damage or entanglement.
- Low-Light Visibility: Utilize the dual LED headlights for improved visibility during operation in low-light conditions.
- Moving Parts: Be cautious of moving parts and rotating speeds. Ensure the unit is off and unplugged before performing any adjustments or maintenance.
[POSSIBLE SAFETY WARNINGS]: Low-light visibility, moving parts, rotation speed.
3. Assembly
The Snow Joe SJ627E-CVR comes mostly pre-assembled. Follow these general steps for final assembly:
- Unpack Components: Carefully remove all parts from the packaging.
- Attach Handle Assembly: Securely attach the upper handle to the lower handle frame using the provided knobs and bolts. Ensure all connections are tight.
- Install Chute Crank: Connect the chute crank rod to the chute mechanism and secure it according to the instructions.
- Attach Discharge Chute: Mount the discharge chute onto the snow blower body. Ensure it is properly seated and secured.
- Cable Management: Route any electrical cables along the handle using the provided cable holders to prevent snagging.
Video: Snow Joe SJ627E Electric Snow Blower Demo Video. This video demonstrates the assembly process and key features of the Snow Joe SJ627E Electric Snow Blower, including attaching the handle and chute, and preparing it for operation.
4. Setup
Before operating your Snow Joe SJ627E-CVR, ensure proper setup:
- Power Connection: Connect the snow blower to a suitable outdoor-rated extension cord. Ensure the extension cord is rated for outdoor use and can handle the 15-amp power requirement.
- Chute Adjustment: Use the 180-degree adjustable chute control to direct the snow stream away from desired areas.
- Check for Obstructions: Verify that the auger and discharge chute are free of any debris or obstructions.
5. Operating Instructions
Operating your Snow Joe SJ627E-CVR is straightforward:
- Start-Up: The unit starts instantly without the need for gas or oil. Simply press the safety button and pull the bail switch to engage the motor.
- Snow Clearing: Push the snow blower forward at a comfortable pace. The powerful 15-amp motor clears up to 840 pounds of snow per minute, creating a 22-inch wide and 13-inch deep path.
- Chute Direction: Use the 180-degree adjustable chute to direct snow up to 25 feet away, ensuring precise placement and avoiding cleared areas.
- Nighttime Operation: Activate the dual LED headlights for enhanced visibility when clearing snow in low-light conditions.
- Maneuverability: The lightweight design (35 pounds) allows for easy maneuvering around your property.
- Surface Protection: The all-steel auger with rubber-tipped blades is designed to clear snow reliably while protecting surfaces like driveways, decks, and sidewalks from damage.
Video: SnowJoe 22 Inch Test. This video demonstrates the Snow Joe SJ627E-CVR in action, clearing snow from a driveway, showcasing its clearing capabilities and ease of use.

Image: A person operating the Snow Joe SJ627E-CVR snow blower, clearing a path through moderate snow on a driveway. The snow blower is shown effectively throwing snow to the side.

Image: The Snow Joe SJ627E-CVR snow blower in operation during low-light conditions, with its dual LED headlights brightly illuminating the path ahead for enhanced visibility.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your Snow Joe SJ627E-CVR:
- Cleaning: After each use, ensure the snow blower is unplugged. Use the provided clean-out tool to remove any snow or ice buildup from the auger and chute. Wipe down the exterior with a damp cloth.
- Inspection: Periodically inspect the auger blades for wear or damage. Check all fasteners for tightness.
- Storage: Store the snow blower in a dry, covered area. The included bonus cover provides protection against elements.
- No Gas, Oil, or Maintenance Needs: This electric unit requires no gas or oil, simplifying maintenance compared to gas-powered models.

Image: The Snow Joe SJ627E-CVR electric snow blower shown with its custom-fit protective cover, ready for storage.
7. Troubleshooting
If you encounter issues with your Snow Joe SJ627E-CVR, refer to these common troubleshooting tips:
- Unit Not Starting: Ensure the power cord is securely plugged into both the snow blower and a functioning electrical outlet. Verify that the safety button is pressed before pulling the bail switch.
- Reduced Performance: Check the auger and chute for any snow or ice clogs. Use the clean-out tool to remove obstructions. Ensure the snow is not excessively deep or wet for the unit's capacity.
- Unusual Noise/Vibration: Immediately turn off and unplug the unit. Inspect the auger for any foreign objects or damage. Contact customer support if the issue persists.
- LED Lights Not Working: Check for any visible damage to the light housing or wiring.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Snow Joe |
| Model Number | SJ627E-CVR |
| Power Source | Corded Electric |
| Motor | 15-Amp |
| Clearing Width | 22 Inches |
| Ideal Snow Depth | 13 Inches |
| Throw Distance | Up to 25 feet |
| Chute Rotation | 180 Degrees |
| Headlights | Dual LED |
| Item Weight | 35 Pounds |
| Product Dimensions | 23.4"D x 22"W x 26"H |
| Color | Blue |
| Voltage | 120 Volts (AC) |
| Certification | ETL |

Image: An infographic showcasing the key features and dimensions of the Snow Joe SJ627E-CVR, including its adjustable chute, compact wheels, and surface-safe engineering, along with its length, width, height, and weight.
9. Warranty & Support
The Snow Joe SJ627E-CVR 15-Amp Corded Electric Snow Blower is backed by a 2-Year Warranty. For any warranty claims, technical support, or questions regarding your product, please contact Snow Joe customer service directly. Keep your purchase receipt as proof of purchase for warranty validation.
- Protection Plans: Additional 2-Year and 3-Year Protection Plans are available for extended coverage.
- Manufacturer: Snow Joe





