PDP Rematch Wired Gaming Controller: 1-Up Mushroom - Instruction Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your PDP Rematch Wired Gaming Controller, 1-Up Mushroom edition. This controller is officially licensed for Nintendo Switch, Nintendo Switch Lite, and Nintendo Switch - OLED Model. It also functions with Nintendo Switch 2, though the C Button is not available.

Image: Front view of the PDP Rematch Wired Gaming Controller, featuring a black body with green 1-Up Mushroom designs and a wired connection.

Key Features

• Official Nintendo License: Ensures full compatibility and quality for Nintendo Switch, Switch Lite, and OLED models.
• Glow-in-the-Dark Design: The 1-Up Mushroom design glows in the dark after exposure to UV light, adding a unique visual element.
• Mappable Quick-Action Buttons: Two programmable back buttons allow for customized gameplay and faster reactions.
• Built-in Audio Controls: Features D-pad audio controls, a 3.5mm headset jack, and USB-chat compatibility for immersive sound and communication.
• Wired Connection: Provides a reliable, lag-free gaming experience with a 10ft wired connection.
• Interchangeable Components: Faceplate, analog sticks, and D-pad can be swapped with other compatible Rematch controller parts for personalization.

Image: The PDP Rematch Wired Gaming Controller with its 1-Up Mushroom design glowing brightly in a dark environment.

Setup Guide

1. Connecting the Controller

1. Ensure your Nintendo Switch console is powered on and docked, or in handheld mode with a USB-C to USB-A adapter (not included) if connecting directly to the console.
2. Locate an available USB port on your Nintendo Switch dock or console.
3. Plug the USB-A connector of the PDP Rematch Wired Gaming Controller into the USB port.
4. The controller is plug-and-play and should be recognized automatically by your Nintendo Switch.

Image: The PDP Rematch Wired Gaming Controller connected via its long USB cable, ready for use.

2. Audio Connection

• To use a headset, plug your 3.5mm audio jack headset into the port located at the bottom of the controller.
• USB-chat functionality is supported for compatible games.

Image: A close-up view of the controller's bottom, highlighting the 3.5mm audio jack for headset connection.

3. Customizing the Controller (Interchangeable Parts)

• The faceplate, analog sticks, and D-pad are designed to be interchangeable.
• To remove the faceplate, gently pry it off from the edges.
• Analog sticks and D-pad can be pulled straight up to remove and replaced with other compatible parts (sold separately).
• Ensure parts are securely seated before use.

Image: An illustration demonstrating how various components of the controller, such as the faceplate, analog sticks, and D-pad, can be swapped.

Operating Instructions

1. Basic Controls

The PDP Rematch Wired Gaming Controller features standard Nintendo Switch button layouts, including A, B, X, Y buttons, a D-pad, left and right analog sticks, L/R shoulder buttons, and ZL/ZR triggers. It also includes Home, Capture, Plus (+), and Minus (-) buttons.

Image: A clear top-down view of the controller, detailing the placement of all buttons and analog sticks.

2. Programming Back Buttons

• The two quick-action back buttons can be programmed to replicate any other button on the controller.
• Refer to the specific programming instructions provided in the controller's packaging or the official PDP support website for detailed steps on remapping.

Image: The rear of the controller, highlighting the two programmable quick-action back buttons.

3. Adjusting Audio

• Volume can be adjusted directly using the D-pad controls when a headset is connected.
• Press the D-pad Up/Down for volume adjustment.

Image: A detailed view of the D-pad, illustrating its function for on-board audio adjustments.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the controller. Avoid abrasive cleaners or solvents.
• Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures. Avoid wrapping the cable tightly around the controller to prevent damage.
• Cable Care: Do not pull on the cable to disconnect it from the console. Always grasp the USB connector firmly.

Troubleshooting

• Controller Not Responding:
  • Ensure the USB cable is securely plugged into both the controller and the Nintendo Switch dock/console.
  • Try plugging the controller into a different USB port.
  • Restart your Nintendo Switch console.
• No Audio Through Headset:
  • Verify your headset is fully plugged into the 3.5mm jack on the controller.
  • Check the volume settings on your Nintendo Switch and adjust using the D-pad controls on the controller.
  • Ensure your headset is functioning correctly by testing it with another device.
• Back Buttons Not Programming:
  • Follow the programming instructions carefully. Incorrect steps may prevent successful remapping.
  • Ensure the controller firmware is up to date (check PDP's official support website).

Specifications

Official Product Video

Warranty and Support

For warranty information, technical support, or further assistance with your PDP Rematch Wired Gaming Controller, please visit the official PDP website or contact their customer support directly. Keep your proof of purchase for warranty claims.

Manufacturer: PDP

Website: Visit the PDP Store on Amazon