Introduction
This manual provides comprehensive instructions for the proper use, setup, maintenance, and care of your Bihui 15pc Notched Trowel Set. Designed for various tile setting applications, this versatile kit offers a range of blade options and convenient storage. Please read this manual thoroughly before operating the tool to ensure safe and effective use.
Product Components
The Bihui 15pc Notched Trowel Set includes the following components:
- 2 Interchangeable Soft Grip Handles: Ergonomically designed for comfortable and secure handling, allowing for both right and left-handed use.
- 6 Stainless Steel Blades (11" x 4.5"): Includes notched blades with 6mm, 8mm, 10mm notches, a Tiger notch, a Diagonal notch, and a 10x20mm Round Notch.
- 6 Stainless Steel Blades (18" x 5"): Includes notched blades with 6mm, 8mm, 10mm, 12mm notches, a Tiger notch, and a Diagonal notch.
- Storage Box: A durable case designed for organized storage and protection of all components.
Image: Overview of the Bihui 15pc Notched Trowel Set, showcasing multiple blade types and handles.
Image: The durable storage box, open to reveal the organized compartments for blades and handles.
Setup
The Bihui Notched Trowel Set features interchangeable handles for ease of use. Follow these steps to set up your trowel:
- Select a Blade: Choose the appropriate stainless steel blade (11" x 4.5" or 18" x 5") with the desired notch size and pattern for your specific tile setting application.
- Attach Handle: Align the soft grip handle with the mounting mechanism on the chosen blade. Securely attach the handle by engaging the locking mechanism. Ensure the handle is firmly seated and does not wobble.
- Verify Attachment: Gently pull on the handle to confirm it is securely attached to the blade before beginning work.
Image: A trowel blade with two handles attached, illustrating the interchangeable and ambidextrous design for user convenience.
Operating Instructions
Proper operation of the notched trowel is crucial for effective tile adhesive application. Follow these general guidelines:
- Prepare Surface: Ensure the surface where tiles will be laid is clean, dry, and level.
- Mix Adhesive: Prepare your tile adhesive according to the manufacturer's instructions.
- Apply Adhesive: Using the flat side of the trowel, spread a thin layer of adhesive onto the substrate.
- Create Notches: Hold the notched side of the trowel at a consistent angle (typically 45-60 degrees) to the surface and pull it through the adhesive to create uniform ridges. The size and shape of the notches should match the tile size and adhesive type.
- Lay Tiles: Press tiles firmly into the notched adhesive, ensuring full coverage and proper alignment.
- Clean Excess: Promptly remove any excess adhesive from tile surfaces and grout lines before it cures.
Image: A gloved hand demonstrating the proper technique for spreading tile adhesive with a notched trowel, creating uniform ridges.
Maintenance
Proper maintenance extends the life of your Bihui Trowel Set and ensures optimal performance:
- Immediate Cleaning: After each use, thoroughly clean all blades and handles with water to remove any adhesive residue before it hardens. Dried adhesive can be difficult to remove and may damage the blade.
- Drying: Ensure all components are completely dry before storing to prevent rust, especially on the stainless steel blades.
- Storage: Store the trowel set in its provided storage box in a dry environment. This protects the blades from damage and keeps the set organized.
- Inspection: Periodically inspect blades for wear, bending, or damage. Replace damaged blades to maintain consistent adhesive application.
Troubleshooting
This section addresses common issues you might encounter:
| Problem | Possible Cause | Solution |
|---|---|---|
| Adhesive not spreading evenly. | Blade is worn or damaged; adhesive consistency is incorrect; incorrect trowel angle. | Inspect and replace blade if necessary. Adjust adhesive mixture. Maintain a consistent 45-60 degree angle. |
| Handle feels loose. | Handle not fully engaged with the blade's locking mechanism. | Re-attach the handle, ensuring it clicks securely into place. Verify stability before use. |
| Rust spots on blades. | Blades not dried properly after cleaning; stored in a humid environment. | Ensure blades are completely dry before storage. Store in the provided dry storage box. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | PTSJK15 |
| Brand | Bihui |
| Material | Stainless Steel (Blades), Rubber (Handle) |
| Blade Dimensions (Small) | 11"L x 4.5"W |
| Blade Dimensions (Large) | 18"L x 5"W |
| Included Blades (11" x 4.5") | Notched (6, 8, 10mm), Tiger notch, Diagonal notch, 10x20mm Round Notch |
| Included Blades (18" x 5") | Notched (6, 8, 10, 12mm), Tiger notch, Diagonal notch |
| Item Weight | Approximately 20 pounds (entire set) |
| Power Source | Hand Powered |
Warranty and Support
For specific warranty information and customer support regarding your Bihui 15pc Notched Trowel Set, please refer to the documentation included with your purchase or contact Bihui customer service directly. Contact details can typically be found on the manufacturer's official website or on the product packaging.
Always purchase genuine replacement parts from authorized dealers to ensure compatibility and maintain product integrity.
