Stanley Quencher H2.0 FlowState Tumbler 40oz Instruction Manual

1. Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your Stanley Quencher H2.0 FlowState Tumbler 40oz. Please read these instructions carefully before first use to ensure optimal performance and longevity of your product.

2. Product Overview

The Stanley Quencher H2.0 FlowState Tumbler is designed for hydration on the go, featuring durable construction and advanced temperature retention capabilities.

Key Features:

• Recycled Stainless Steel Construction: Durable and sustainable material.
• Vacuum Insulation: Maintains beverage temperature for extended periods.
• FlowState Lid: Features a rotating cover with three positions for versatile use.
• Ergonomic Handle: Includes comfort-grip inserts for easy carrying.
• Narrow Base: Designed to fit most car cup holders.

Image 1: Stanley Quencher H2.0 FlowState Tumbler 40oz with straw in upright position.

3. Components

Your Stanley Quencher H2.0 FlowState Tumbler package includes the following items:

• 40oz Tumbler Body
• FlowState Lid
• Reusable Straw

Image 2: Detached FlowState Lid and reusable straw.

4. Setup

First Use Preparation:

1. Unpack: Carefully remove all components from the packaging.
2. Wash: Before initial use, wash the tumbler body, lid, and straw thoroughly with warm, soapy water. Rinse completely.
3. Inspect: Ensure all parts are clean and free from any debris.

5. Operating Instructions

Using the FlowState Lid:

The FlowState lid features a rotating cover with three distinct positions:

• Straw Opening: Designed to securely hold the reusable straw in place and resist splashes.
• Drink Opening: For direct sipping without the straw.
• Full-Cover Top: Provides a sealed closure for transport, though it is not entirely leak-proof when tipped.

Filling and Drinking:

1. Fill: Remove the lid and fill the tumbler with your desired cold beverage. Do not overfill.
2. Secure Lid: Place the FlowState lid firmly onto the tumbler, ensuring a snug fit.
3. Select Position: Rotate the lid cover to your preferred drinking position (straw, drink opening, or closed).
4. Insert Straw (if applicable): If using the straw opening, insert the reusable straw.

Image 3: Stanley Quencher H2.0 FlowState Tumbler with straw folded into the lid.

6. Maintenance and Care

Cleaning Instructions:

• Hand Wash Only: To preserve the finish and insulation properties, hand wash all components with warm, soapy water.
• Avoid Abrasives: Do not use abrasive cleaners or scrubbers, as these can damage the tumbler's surface.
• Drying: Allow all parts to air dry completely before reassembly or storage.

Storage:

Store the tumbler with the lid removed to allow for air circulation and prevent odors.

7. Troubleshooting

Common Issues:

• Leakage: The FlowState lid is designed to resist splashes but is not fully leak-proof if the tumbler is tipped over. Ensure the lid is securely fastened and the cover is in the full-cover position for best splash resistance.
• Reduced Temperature Retention: Ensure the lid is properly sealed. Pre-chilling the tumbler with cold water before adding your beverage can enhance cold retention.

8. Specifications

Technical Details:

9. Warranty and Support

Warranty Information:

For detailed information regarding the product warranty, please refer to the official STANLEY website or the warranty card included with your purchase. This manual does not contain specific warranty terms.

Customer Support:

If you require further assistance or have questions not covered in this manual, please visit the official STANLEY customer support portal or contact their service department directly. Contact information can typically be found on the manufacturer's website.