EverBrite Solar Outdoor Lights User Manual

1. Introduction

Thank you for choosing the EverBrite Solar Outdoor Lights. This manual provides essential information for the proper installation, operation, and maintenance of your new solar motion sensor light. Please read it thoroughly before use and retain it for future reference.

Image: The EverBrite Solar Outdoor Light, showcasing its three adjustable LED heads and integrated solar panel.

2. Product Features

• Solar Motion Sensor Lights: Equipped with a 120-degree angle and sensitive motion sensor for wide and immediate illumination. Provides 30 seconds of light upon motion detection, automatically turning off if no motion is detected.
• Wide Angle Illumination: Features 128 super bright LED beads, producing up to 7000K high brightness output. Three adjustable heads can move upwards, downwards, and horizontally, offering a 270° wide lighting angle and 26 feet sensing distance.
• Switch Control and Longer Lasted Battery: Controlled by an ON/OFF switch. Includes an 1800 mAh rechargeable lithium-ion battery for brighter and longer-term operation. Charges automatically during the day and activates in darkness.
• IP65 Waterproof: Constructed from durable ABS material, ensuring resilience against elements and bad weather. Suitable for outdoor patios, gardens, lawns, decks, yards, drives, outside walls, fences, etc.
• Easy Installation: Comes with a fixed buckle for hanging, allowing easy installation wherever desired. The solar panel and spotlights can be rotated to any angle.

Image: The EverBrite light is designed for all seasons, showcasing its IP65 waterproof rating and resistance to cold, heat, and frost.

3. Package Contents

Please check the package to ensure all components are present:

• EverBrite Solar Outdoor Light Unit (with integrated solar panel, PIR Motion Sensor, and Lamp Heads)
• Mounting Bracket
• Mounting Hardware (M4x35mm screws and 6x30mm wall plugs)

Image: A detailed breakdown of the product accessories included in the package.

4. Setup and Installation

Follow these steps for optimal performance:

1. Choose a Location: Select a location that receives direct sunlight for at least 6-8 hours a day to ensure effective battery charging. The recommended mounting height is 5-8 feet (1.5-2.4 meters) from the ground.
2. Install the Mounting Bracket: Use the provided screws and wall plugs to securely attach the mounting bracket to the desired surface (e.g., wall, fence).
3. Buckle the Light: Carefully slide the EverBrite light unit onto the installed mounting bracket until it clicks securely into place.
4. Adjust Solar Panel: Ensure the solar panel is facing upwards towards the sun to maximize charging efficiency.
5. Adjust Lamp Heads: Rotate the three lamp heads individually to cover the desired lighting area.
6. Activate the Light: Locate the ON/OFF switch on the back of the solar panel and turn it to the 'ON' position before initial use.

Image: Step-by-step visual guide for installing the EverBrite Solar Outdoor Light.

Image: Illustration of the light's dimensions and the individual rotation capability of each lamp head.

5. Operating Instructions

The EverBrite Solar Outdoor Light operates automatically based on light conditions and motion detection.

Automatic Operation:

• During the day, the solar panel converts sunlight into electricity and stores it in the internal rechargeable battery. The light will remain off.
• At night or in dark conditions, the light will automatically enter standby mode.
• When motion is detected within the 26-foot sensing distance and 120-degree sensing angle, the light will turn on at full brightness for approximately 30 seconds.
• If no further motion is detected, the light will automatically turn off after 30 seconds to conserve battery power.

Image: The light charges during the day and illuminates automatically at night.

Image: Explanation of the light's induction modes, showing how it responds to motion.

Image: Visual representation of the light's wide irradiation range and motion sensing capabilities.

Official Product Video:

Video: An official demonstration of the EverBrite Solar Motion Sensor Light in action, highlighting its features and performance.

6. Maintenance

To ensure the longevity and optimal performance of your EverBrite Solar Outdoor Light, consider the following maintenance tips:

• Clean the Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, leaves, or snow. A clean panel ensures maximum sunlight absorption and charging efficiency.
• Check for Obstructions: Periodically check that no trees, bushes, or other objects are blocking direct sunlight from reaching the solar panel.
• Inspect Connections: Ensure all mounting hardware remains secure and the light unit is firmly attached to the bracket.
• Battery Care: The integrated lithium-ion battery is designed for long life. Avoid prolonged storage in a completely discharged state. If storing for an extended period, fully charge the light and then store it in a cool, dry place.

7. Troubleshooting

If you encounter issues with your EverBrite Solar Outdoor Light, please refer to the following common problems and solutions:

8. Specifications

9. Warranty and Support

EverBrite products are manufactured with high-quality standards. For any questions, concerns, or warranty claims, please contact our customer support team through the retailer's platform or the official EverBrite website. Please have your model number (E021039) and purchase information ready when contacting support.