moofit Cadence Sensor User Manual

Introduction

The moofit Cadence Sensor is a wireless device designed to track your cycling cadence in real-time. Utilizing both Bluetooth 4.0 and ANT+ technologies, it provides accurate data to compatible bike computers, indoor trainers, and smartphone fitness applications. Its compact, magnet-free design allows for easy installation on your bike's crank arm, and its IP67 waterproof rating ensures reliable performance in various weather conditions.

Package Contents

Upon opening your moofit Cadence Sensor package, please verify that all the following items are included:

• 1 x moofit Cadence Sensor
• 1 x User Manual
• Rubber bands for installation

Image: Contents of the moofit Cadence Sensor package.

Product Overview

The moofit Cadence Sensor (Model: MOOFIT CS8) is a compact and robust device designed for precise cycling cadence measurement. It features dual connectivity with Bluetooth 4.0 and ANT+ for broad compatibility with various cycling platforms.

Image: Front view of the moofit Cadence Sensor.

Key Features:

• BLE 4.0 & ANT+ Technology: Connects to bike computers/indoor trainers via ANT+ and smart device apps via Bluetooth.
• Real-Time Data: Tracks cadence data in real-time on your bike computer or smartphone.
• Easy to Install: No magnets needed; attaches directly to your bike’s crank arm.
• IP67 Waterproof: Designed to withstand rainy conditions, ensuring durability.
• Wide Compatibility: Compatible with popular fitness apps such as Wahoo Fitness, Endomondo, E-lite HRV, Uhr, RideWithGPS, Cyclemeter, Peloton (iOS version only), and Openrider.

Image: Detailed dimensions of the moofit Cadence Sensor.

Image: Connectivity options for the moofit Cadence Sensor.

Image: The sensor's IP67 waterproof capability.

Setup

1. Battery Installation

Before first use, ensure the insulating sheet under the battery has been removed. If present, remove it and reinstall the battery. The red LED indicator will flash for several seconds upon successful reinstallation.

Image: Battery compartment and CR2032 battery.

2. Mounting the Sensor

The moofit Cadence Sensor is designed for easy, magnet-free installation. Attach the sensor to your bike's crank arm using the provided rubber bands. Ensure it is securely fastened and does not interfere with pedaling.

Image: Moofit Cadence Sensor mounted on a bicycle crank arm.

3. Initial Setup Video Guide

For a visual guide on unboxing, battery installation, mounting, and pairing, please watch the official product video below.

Operating Instructions

Connecting to Devices

The moofit Cadence Sensor supports both ANT+ and Bluetooth connectivity for versatile use.

• ANT+ Connection: To connect to a bike computer or indoor trainer, navigate to the sensor pairing menu on your device and select the moofit Cadence Sensor. Spin the crank arm to activate the sensor and ensure it is detected.
• Bluetooth Connection: For smartphone apps, open your preferred fitness application (e.g., Wahoo Fitness, Zwift, Peloton iOS). Do not pair the sensor directly through your phone's Bluetooth settings. Instead, pair it within the app's sensor or device management section. Spin the crank arm to activate the sensor for detection.

Important Note for Wahoo App Users:

Due to brand connection restrictions, you cannot pair two moofit sensors (e.g., a cadence sensor and a speed sensor) with the Wahoo app simultaneously. Only one moofit sensor can be paired at a time, unless using Wahoo's own brand sensors.

Real-Time Data Tracking

Once connected, the sensor will transmit real-time cadence data to your paired device or application, allowing you to monitor your pedaling rate during your rides.

Maintenance

Battery Replacement

The moofit Cadence Sensor uses a CR2032 battery. When the sensor's performance degrades or it no longer connects, it may be time to replace the battery. Follow the steps outlined in the "Battery Installation" section under Setup to replace the battery.

Cleaning

The sensor is IP67 waterproof, meaning it is protected against dust and can withstand immersion in water up to 1 meter for 30 minutes. To clean the sensor, simply wipe it with a damp cloth. Avoid using harsh chemicals or abrasive materials.

Troubleshooting

• Sensor not turning on or connecting:

  - Ensure the insulating sheet under the battery has been removed. Reinstall the battery to activate the sensor. The red LED will flash briefly.

  - Make sure the battery is correctly inserted and has sufficient charge.

  - Spin the crank arm to wake up the sensor before attempting to pair.

• Cannot find the sensor in the app:

  - Do not pair the sensor via your phone's general Bluetooth settings. Always pair it directly within the fitness application you intend to use (e.g., Zwift, Wahoo Fitness, Peloton).

  - Ensure the app is compatible with the moofit sensor (e.g., Wahoo Fitness, Endomondo, E-lite HRV, Uhr, RideWithGPS, Cyclemeter, Peloton (iOS), Openrider).

• Sensor light flashes for only a few seconds then goes off:

  - This is normal behavior. The light is designed to flash only for a few seconds when the battery is installed or when the sensor is activated, to conserve battery life.

• Sensor does not provide distance data:

  - This moofit sensor is a cadence-only sensor and does not provide distance data. For distance, a separate speed sensor is required.
• Issues with Wahoo app pairing:

  - The Wahoo app has brand connection restrictions. You can only pair one moofit sensor at a time. If you have both a moofit cadence and speed sensor, you will not be able to use both simultaneously with the Wahoo app.

• Can the sensor be attached to a shoe?

  - Attaching the sensor to your shoe is not recommended as it may affect the accuracy of the data.

Specifications

Warranty and Support

The moofit Cadence Sensor comes with a 1-Year Manufacturer Warranty. For any product-related inquiries, technical assistance, or warranty claims, please contact the manufacturer, Wantacme, or refer to the official user guide PDF available online.

You can access the official User Guide (PDF) here.