1. Introduction
This manual provides detailed instructions for the proper use and maintenance of your SHYSKY VF-6800P Digital Satellite Finder. Please read this manual thoroughly before operating the device to ensure optimal performance and longevity. This device is designed to assist in the precise alignment of satellite dishes and terrestrial antennas, supporting various digital broadcasting standards.
2. Product Overview
The SHYSKY VF-6800P is a versatile digital signal meter equipped with a 2.4-inch TFT color LCD screen. It supports DVB-S/S2, DVB-T/T2, and DVB-C/C2 standards, making it suitable for a wide range of signal reception tasks. Key features include a spectrum function, motor control capabilities, and a built-in flashlight and compass for convenience during installation.
Figure 2.1: Front view of the SHYSKY VF-6800P Digital Satellite Finder, showing the 2.4-inch LCD screen, control buttons, digital display for quality, and integrated compass.
Figure 2.2: Front and back view of the device, highlighting the flashlight on the rear panel.
2.1. Components and Controls
- 2.4" TFT Color LCD Screen: Displays menus, signal information, and settings.
- Control Buttons: Navigation (Up, Down, Left, Right), OK, Exit, Function keys (F1, F2).
- Digital Display: Shows signal quality percentage.
- Compass: Integrated for directional guidance.
- LNB/Antenna Input: F-type connector for satellite and terrestrial antenna connections.
- Power Switch: On/Off control for the device.
- USB/Type-C Ports: For software updates and charging.
- Flashlight: LED light for illumination in dark environments.
- Audio Alarm: Provides audible feedback for signal lock.
Figure 2.3: Detailed view showing the power switch, LNB/antenna input (S2 for satellite, C/T2 for terrestrial), USB and Type-C ports, flashlight, and digital display.
3. Setup
3.1. Initial Charging
Before first use, fully charge the device. Connect the provided charging cable to the Type-C port on the side of the device and plug the other end into a compatible 12V power adapter. The charging indicator will show the charging status. The device features a 7.4V/2000mAh Li-ion battery with fast charging capability.
3.2. Powering On/Off
Locate the power switch on the side of the device. Slide the switch to the 'ON' position to power on the device. To power off, slide the switch to the 'OFF' position.
Figure 3.1: Side view of the device, illustrating the power switch and the input connectors for satellite (S2) and terrestrial (C/T2) signals.
3.3. Connecting to Antenna/LNB
Connect your satellite LNB cable or terrestrial antenna cable to the appropriate F-type connector on the top of the device. Ensure connections are secure. The device provides LNB short-circuit protection and can supply power (0V/5V/12V) to T/T2 antennas.
4. Operating Instructions
4.1. Main Menu Navigation
Upon powering on, the main menu will appear on the LCD screen. Use the directional buttons (Up, Down, Left, Right) to navigate between options and the 'OK' button to select. The 'Exit' button typically returns to the previous screen or menu.
4.2. Satellite Signal Finding (DVB-S/S2)
- From the main menu, select 'DVB S2' or 'Satellite Setup'.
- Choose the desired satellite from the list. If not present, you may need to add or edit transponder information.
- Adjust the satellite dish direction while observing the signal strength and quality readings on the screen. The digital display and audio alarm will assist in fine-tuning.
- The device displays parameters such as Signal Strength, Quality, BER (Bit Error Rate), PWR (Power), SNR (Signal-to-Noise Ratio), and MER (Modulation Error Ratio).
- Once optimal signal is achieved, secure the dish.
4.3. Terrestrial Signal Finding (DVB-T/T2, DVB-C/C2)
- From the main menu, select 'DVB T2' or 'DVB C' as appropriate.
- Select the region or frequency band.
- Adjust the terrestrial antenna direction while monitoring the signal readings.
- The device will provide real-time feedback on signal quality and strength.
4.4. Spectrum Function
The spectrum function allows for a visual representation of the signal frequency distribution, aiding in identifying interference or optimizing signal reception. Access this feature from the main menu or system settings.
4.5. Motor Setup
The device supports DISEQC 1.0/1.1/1.2 and 0/22khz Tone for controlling motorized satellite dishes. Refer to the 'Motor Setup' menu for configuration and control options.
4.6. Using the Flashlight and Backlit Keys
The device includes a high-brightness LED flashlight and backlit keys for operation in low-light conditions. These features can typically be toggled On/Off via dedicated buttons or menu options.
5. Maintenance
5.1. Cleaning
Wipe the device with a soft, dry cloth. Do not use liquid cleaners or solvents, as they may damage the screen or casing.
5.2. Battery Care
- Avoid fully discharging the battery frequently.
- Charge the device regularly, even if not in use, to maintain battery health.
- Store the device in a cool, dry place when not in use for extended periods.
5.3. Software Updates
The device supports software updates via the Micro USB port. Check the manufacturer's website for the latest firmware and instructions on how to perform an update.
6. Troubleshooting
- Device does not power on: Ensure the battery is charged. Connect the charger and try again. Check the power switch position.
- No signal detected: Verify all cable connections are secure. Ensure the LNB or antenna is correctly installed and pointed in the general direction of the satellite/transmitter. Check LNB power settings in the device menu.
- Poor signal quality: Fine-tune the antenna/dish alignment. Check for obstructions. Ensure the correct satellite/transponder settings are selected in the device.
- Screen is unresponsive: Try restarting the device. If the issue persists, contact customer support.
- Battery drains quickly: Ensure the device is fully charged before use. Reduce screen brightness if possible. If battery life significantly degrades, it may require replacement.
7. Specifications
Figure 7.1: Product packaging displaying key specifications and features.
| Feature | Specification |
|---|---|
| Model | VF-6800P |
| Display | 2.4 inch TFT Color LCD |
| Supported Standards | DVB-S/S2, DVB-T/T2, DVB-C/C2, MPEG2/MPEG4 |
| Test Content | Signal Strength, Quality, BER, PWR, SNR, MER |
| DISEQC Support | 1.0/1.1/1.2, 0/22khz Tone |
| LNB Protection | Short-circuit protection |
| Antenna Power | 0V/5V/12V for T/T2 antenna |
| Battery | 7.4V/2000mAh Li-ion, Fast charging |
| Power Supply | 12V |
| Connectivity | Micro USB (for software updates) |
| Dimensions | 1.57 x 3.54 x 6.69 inches (4 x 9 x 17 cm) |
| Weight | 1.17 pounds (530 grams) |
| Additional Features | Spectrum Function, Loop Search, Multiple OSD languages, 10 OSD interface colors, Audio alarm, LED Flashlight, Backlit keys, Compass |
8. Warranty Information
Specific warranty details are not provided in the product information. Please refer to the product packaging or contact the retailer/manufacturer directly for warranty terms and conditions.
9. Support
For technical assistance or further inquiries, please contact SHYSKY customer support through their official website or the contact information provided with your purchase. Ensure you have your product model number (VF-6800P) and purchase details ready when seeking support.
